All Products

SKU: DF-FIT0783

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...

SKU: DF-FIT0784

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...

SKU: PI-COM0207

The NE555 is one of the most iconic and widely used integrated circuits in electronics history. Designed in 1971 by Hans Camenzind, it provides configurable timing and oscillation using just a few external resistors and capacitors. Available here in both single (555, PDIP-8) and dual (556, PDIP-1...

SKU: PI-COM0208

The NE556N is a dual timer IC containing two independent 555 timers in a single PDIP-14 package. Both timers share common power and ground pins but operate completely independently, making it ideal for circuits that need two timing or oscillation functions without the board space of two separate ...

SKU: SF-COM-16473

The classic 555 timer/oscillator IC from Texas Instruments — one of the most versatile and widely used integrated circuits in electronics. With just a few external resistors and capacitors, it can generate timing delays from microseconds to hours, produce square wave oscillations, and drive LEDs,...

SKU: TB-BM2466

This practical guide covers the functions and operation of the iconic 555 Timer IC, then walks through 21 projects you can build using it. From photo timers and touch plate controllers to NiCad chargers and frequency dividers, each project is explained with clear circuit diagrams and instructions...

SKU: AF-5917 · MPN: ADA5917

A 5.5×2.1mm DC barrel polarity reversing cable that swaps centre-negative to centre-positive (or vice versa). Simply plug it inline between your DC power supply and device to reverse the polarity — no rewiring required. This is useful for powering devices that use centre-negative barrel jacks (s...

SKU: LB-LS0667

This 55-piece plastic gear pack contains an assortment of gears in various sizes and tooth counts for building custom drive trains, mechanical linkages, and DIY motorised projects. Pair them with a small DC motor to create gear reduction systems, conveyor mechanisms, or simple robotic drives. Ke...

SKU: LB-LS3901

A 5.5V 350mA solar panel measuring 150×85mm, suitable for powering small electronics projects, charging batteries, and solar-powered sensor nodes. The 5.5V output is convenient for directly charging single-cell lithium batteries via a charge controller, or powering 5V circuits through a low-dropo...

SKU: LB-ELM-2002SRWA

A 5×7 LED dot matrix display module (ELM-2002 series) with large 5.0mm diameter emitting dots in super red. Suitable for building large numerical and alphanumerical readout displays. The white dots on a grey surface provide good contrast and readability. Specifications Matrix – 5 × 7 dots Dot...

SKU: DF-DFR0550-V2 · MPN: DFR0550-V2

A 5-inch IPS capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi via the DSI interface. Features optical bonding (full lamination), anti-fingerprint and anti-glare surface treatment, and a high brightness of 550 cd/m² — performing well even in ou...

SKU: DF-DFR0550

A 5-inch TFT capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi 3B and 3B+ via the DSI interface. The display is powered directly from the Pi — no external power supply required. A potentiometer on the back allows hardware backlight adjustment. ...

SKU: DF-SEN0521

The 5.8GHz Microwave Radar Module is a high-sensitivity motion detection sensor that transmits and receives 5.8GHz electromagnetic waves. By analysing the difference between transmitted and reflected signals, it reliably detects movement within its detection zone. Unlike traditional PIR sensors ...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: EC-DIS05490T

This 5-inch HDMI-compatible display features an 800×480 TFT-LCD panel with 5-point capacitive touch, making it a versatile monitor for Raspberry Pi projects, mini PCs, and single-board computers. Touch input works over USB with no driver installation required — just plug and play. The display in...

SKU: LB-LR0120

This 5-inch HDMI TFT LCD touch screen plugs directly onto a Raspberry Pi via the GPIO header and HDMI connector, providing an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display connects via HDMI for vi...

SKU: LB-LR0120-PI4

This 5-inch HDMI TFT LCD touch screen is designed for Raspberry Pi 4, plugging directly onto the GPIO header with an HDMI connection for an 800×480 resolution display with SPI-based touch input. It draws power from the Pi's GPIO pins, so no separate power supply is needed. The display uses HDMI ...

SKU: TB-RT4648

This 5KΩ Spectrol trimpot is an industrial-quality sealed multi-turn trimmer potentiometer. With 25 turns of adjustment range, it provides precise resistance setting far beyond what a single-turn pot can achieve — ideal for calibration, offset trimming, and fine-tuning analogue circuits. Key Fea...

SKU: LB-LR0335-B

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant blue when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, shaped, and wra...

SKU: LB-LR0335-FG

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant fluorescent green when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow similar to neon tubing — but remains cold to the touch and can be bent, sh...