All Products

SKU: PI-COM1304

A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of capacity — enough to power an Arduino Uno for over a week. Rechargeable NiMH bat...

SKU: LB-LS6069

This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...

SKU: TB-MB3826

With this Powertech Slim Powerbank, you can charge your smartphone, tablet, smartwatch and other portable devices while on the go without worrying about running out of power. Its small and slim design makes it easy to slip into your pocket. Specifications:• Internal battery: LiPo (Lithium Polymer...

SKU: PL-3039

The 50:1 Micro Metal Gearmotor HPCB 12V is a compact brushed DC gearmotor from Pololu's popular micro metal gearmotor family. This high-power carbon brush (HPCB) variant operates at 12V and draws half the current of its 6V equivalent for the same performance, making it better suited to 12V system...

SKU: AF-1680

A 5.0-inch TFT display with 800×480 resolution and LED backlight, providing a large, vibrant screen for embedded projects. This version does not include a touchscreen overlay, making it a lower-cost option when touch input is not required. This is a raw RGB TTL (parallel pixel-clock) display — i...

SKU: AF-1596

A 5.0-inch TFT display with 800×480 resolution, LED backlight, and a 4-wire resistive touchscreen overlay. The touchscreen adds user input capability for interactive interfaces, menus, and control panels. This is the touchscreen version of the 5.0" 40-pin TFT Display without Touchscreen. This is...

SKU: AF-1762

These breakout PCBs make it easy to use 5050-size SMD LEDs on a solderless breadboard. Solder a 5050 LED to either side of the PCB and the pins drop straight into standard 0.1″ breadboard rows — no adapter wiring needed. Key Features 5050 LED Compatible – Footprint matches standard 5050 SMD LE...

SKU: SF-GPS-09079

This is a vertical 10-pin SMD connector designed for use with the GS406 helical GPS receiver module. It provides a surface-mount interface for connecting the GS406 to your custom PCB, enabling access to the module's serial data, power, and control pins. Key Features 10-Pin SMD – Vertical surfa...

SKU: LB-LS2696

A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ADC input — just use a voltage divider with a matching 10K resistor. Key Featur...

SKU: LB-50K

This 50KΩ single-turn potentiometer provides smooth linear (Type B) resistance adjustment, making it ideal for volume controls, brightness adjustments, and analogue input on Arduino and other microcontroller projects. The knurled shaft accepts standard potentiometer knobs for easy panel mounting....

SKU: DF-SEN0648 · MPN: SEN0648

The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, industrial automation, and large-scale 3D scanning. Built to withstand outdoor cond...

SKU: LB-LS3638

This 50-piece plastic gear kit contains everything you need to build a basic DIY racer chassis. The assortment of gears, axles, wheels, and structural parts gives you a foundation to create your own motorised car — then test your 3D printing or crafting skills to add bumpers, scoops, or aerodynam...

SKU: AF-4522

This 50-pin FFC/FPC extender lets you connect two 50-pin 0.5mm pitch flat cables end-to-end to extend their total length. Simply plug a cable into each side of the board and you have a longer cable run — useful when the stock cable isn't quite long enough to reach. The extender has two flip-lock...

SKU: AF-1682

This 50-pin FPC (Flexible Printed Circuit) cable is ultra-thin and flexible, ideal for tight spaces where a round cable would be too bulky. At 250mm (10″) long with 0.5mm pitch contacts, it's a common format used in displays, camera modules, and breakout boards. Key Features 50 Pins – Supports...

SKU: AF-1773

This 50-pin top-contact FPC connector is a surface-mount component for connecting 0.5mm pitch FPC/FFC cables to your custom PCB. It's compatible with many 50-pin displays including 2.8″ TFT panels with resistive touchscreens. This is a fine-pitch SMT component — soldering requires experience wit...

SKU: AF-2571

This 50-pin FPC extension board lets you add approximately 22cm of reach to any 50-pin, 0.5mm pitch FPC/FFC connection. The board features two 50-pin flex connectors with a 200mm (20cm) FPC cable included, giving a total extension of about 22cm when the board length is included. Works with 50-pi...

SKU: PL-1100

A Pololu micro metal gearmotor with a 5:1 gear ratio and low-power (LP) 6V motor. The LP motor variant uses precious metal brushes and draws the least current of the micro metal gearmotor family, making it well-suited for battery-powered projects where efficiency matters more than peak torque. A...

SKU: LB-LS2238

This 520-piece connector kit contains everything you need to make custom 2.54mm (0.1″) Dupont-style jumper wires and harnesses. It includes a comprehensive selection of single-row and dual-row housings from 1-pin to 2×8-pin, along with male and female crimp pins, pin headers, and a 10-wire rainbo...

SKU: DF-DFR0524

A 5.5-inch OLED display with 1920×1080 Full HD resolution and a capacitive multi-touch overlay. The display connects via mini-HDMI for video and USB for touch input, with driver-free plug-and-play touch support on Windows, Linux, and macOS. The USB-powered design eliminates the need for a separa...

SKU: AF-3310

A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom power cables. This is the most common barrel jack size used with Arduino boards...