All Products
Showing 8381-8400 of 10489 products
Servo extension cable 600mm (23.62)
Servo for Micro:bit by Monk Makes
Servo - Generic, 180° Rotation (Sub-Micro Size)
MPN: ROB-24052
Servo - Generic Continuous Rotation (Micro Size)
Servo - Generic High Torque Continuous Rotation (Standard Size)
Servo - Generic High Torque (Standard Size)
Servo - Generic Metal Gear (Micro Size)
Servo - Generic (Sub-Micro Size)
Servo - Hitec HS-422 (Standard Size)
Servo - Hitec HS-805BB (Giant Scale)
Servo - Hitec HS-85MG (Micro Size)
Servo Tester and Speed Controler Power
Servo to Alligator Clip Cable - Shrouded
Servo to Pigtail Cable - Shrouded
Servo Wheel
Servo Y extension cable (300mm)
Servo Y extension cable (500mm)
Sewable Battery Board
Sewable Connector with 5.5/2.1mm DC Jack
MPN: ADA6075
Sewable CR2032 Battery Holder
Servo extension cable 600mm (23.62)
This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics...
Servo for Micro:bit by Monk Makes
The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit, so that you ...
Servo - Generic, 180° Rotation (Sub-Micro Size)
· MPN: ROB-24052
Here is a simple, low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60° (at 6V). This small servo comes with a standard 3 pin power and control cable, six arms and six screws. Note: This is the s...
Servo - Generic Continuous Rotation (Micro Size)
Here, for all your mechatronic needs, is a simple, high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60° A standard 3-pin power and control cable is attached and all hardware listed below is included. Featu...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
Servo - Generic Metal Gear (Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 pin power and control cable (red = power, brown = ground, and yellow = data), and...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...
Servo - Hitec HS-422 (Standard Size)
This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high quality servo is perfect for your mechatronic needs and if you are looking to get i...
Servo - Hitec HS-805BB (Giant Scale)
The Hitec HS-805BB is a giant-scale servo delivering up to 343 oz-in of torque at 6V, making it a powerhouse for large robotics builds, heavy-duty pan-tilt mechanisms, and oversized RC applications. Dual ball bearings and heavy-duty nylon gears ensure smooth, reliable operation under load. Comes...
Servo - Hitec HS-85MG (Micro Size)
The Hitec HS-85MG packs impressive torque into a micro-sized package. With metal gears and a single ball bearing, this servo delivers up to 3.4 kg·cm (48.6 oz·in) of torque at 6V while weighing just 21.9 g — making it an excellent choice for compact robotics, RC models, and mechatronic projects. ...
Servo Tester and Speed Controler Power
The servo tester and controller can be used as a signal generator for electronic speed controllers. If you are looking for a low-cost way to get a servo up and running without any programming, you can plug directly into the servo tester. There are 3 modes that can be use:...
Servo to Alligator Clip Cable - Shrouded
This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector, and on the other end three 30mm shrouded alligator clips. Alligator clips are a staple item for any workbench or maker space, and with th...
Servo to Pigtail Cable - Shrouded
A servo adapter cable with a shrouded male servo connector on one end and three individual breadboard-compatible pigtail wires on the other. Makes it easy to connect a servo to a breadboard, development board, or any standard hookup wire connection. Specifications Connector – Shrouded male ser...
Servo Wheel
Plastic wheel with a cutout specially designed to allow attachment to our larger continuous rotation servo. Makes it easy to get your robot rolling. Each wheel comes with a rubber tire that is quite sturdy. To attach, just remove the horn from your servo, align the splined gear, and use t...
Servo Y extension cable (300mm)
This 300mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed conta...
Servo Y extension cable (500mm)
This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is compatible with almost all of the RC servos.The connectors have gold-flashed cont...
Sewable Battery Board
A lightweight, sewable battery board that's great for paper and fabric engineering projects. Works with CR2032 coin cell batteries. The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY USE&...
Sewable Connector with 5.5/2.1mm DC Jack
· MPN: ADA6075
A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy power connections. The soft rubber base can be sewn by hand or machine directly i...
Sewable CR2032 Battery Holder
A sewable coin cell battery holder designed for wearable electronics projects. The metal tabs have small 1mm holes that accommodate a #5 or smaller needle, making it easy to sew directly onto fabric with conductive thread. The holder accepts standard CR2032 lithium coin cells (3V, ~200mAh), whic...
