All Products

SKU: LB-00084

The Raspberry Pi Ultimate Kit has everything you need:The pack includes: Raspberry Pi 2 Model B (SF-DEV-13297) Power Supply for Raspberry Pi (2254795)  Raspberry Pi SD Card with Noobs (2461033)  Wi-Fi Module for Raspberry Pi (2133900)  Raspberry Pi Official Case (ET-2445370) H...

SKU: AF-2250 · MPN: 2250

An orange polycarbonate case base for the Raspberry Pi Model B+, Pi 2, Pi 3 Model B, and Pi 3 Model B+. The snap-together design lets you mix and match coloured lids and bases for custom combinations. This listing is for the base only — lids are available separately. Made from durable, glossy po...

SKU: ET-2461033

This is an 8GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi Model 2 B. NOOBS is actually a system image with SIX different Linux based operating systems used to run on the Raspberry Pi, Archlinux, OpenELEC, Pidora, RaspBMC, Raspbian and RiscOS. This l...

SKU: ET-2426746

The official Raspberry Pi case from the Raspberry Pi Foundation. A five-part enclosure in raspberry and white, with removable lid and side panels for easy access to the camera/display ports, GPIO header, and HAT devices. Key Features Official Raspberry Pi Foundation Product Five-Part Enclosure...

SKU: ET-RPI-3-PSU

The official Raspberry Pi USB Micro-B power supply, designed to deliver a stable 5.1 V at 2.5 A. Optimised for the Raspberry Pi 3's improved power management, and compatible with all Raspberry Pi models that use Micro USB power input. Key Features Output – 5.1 V DC, 2.5 A Connector – USB Micr...

SKU: AF-4506 · MPN: 4506

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over SPI, delivering vibrant 16-bit colour with wide viewing angles. A Qwiic/STEMMA Q...

SKU: YH-6000300079

A GPIO expansion board that multiplies a single Raspberry Pi 40-pin GPIO header into three parallel rows. This allows you to stack multiple HATs, breakout boards, or jumper wire connections on the same set of GPIO pins simultaneously. Key Features 1-to-3 GPIO Expansion – Three full 40-pin head...

SKU: AF-2244 · MPN: 2244

A snap-on replacement lid in smoke grey for the Raspberry Pi Model B+/Pi 2/Pi 3 polycarbonate case. Mix and match with different coloured bases to customise your Pi's look. The super-glossy polycarbonate is durable enough for bags and toolboxes. The lid fits snugly onto the case base with slim o...

SKU: AF-2252 · MPN: 2252

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your ro...

SKU: AF-2257 · MPN: 2257

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids t...

SKU: AF-4823 · MPN: 4823

A 150mm (6″) GPIO extension cable for Raspberry Pi models with a 2×20 pin header. Extends all 40 GPIO pins between your Pi and a HAT, Bonnet, pHAT, or other accessory, allowing you to mount add-ons away from the board. Plug the socket end onto the Raspberry Pi's GPIO header (white mark aligned w...

SKU: PR-PIM092

Need to adapt your Pibow to fit your project? These handy extension layers will sort you out! While the Pibow remains the best case on the market for the Raspberry Pi, some projects may need you to hack the case a little to suit. With that in mind we present those handy extra layers designed...

SKU: PR-PIM065

Need to adapt your Pibow to fit your project? These handy extension layers will sort you out! While the Pibow remains the best case on the market for the Raspberry Pi, some projects may need you to hack the case a little to suit. With that in mind we present those handy extra layers designed...

SKU: PR-PIM063

Need to adapt your Pibow to fit your project? These handy extension layers will sort you out! While the Pibow remains the best case on the market for the Raspberry Pi, some projects may need you to hack the case a little to suit. With that in mind we present those handy extra layers designed...

SKU: AF-2340 · MPN: 2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: AF-2345 · MPN: 2345

The Adafruit RGB Matrix HAT + RTC makes it easy to drive HUB75-type RGB LED matrices from your Raspberry Pi. This HAT plugs onto any Pi with a 40-pin GPIO header and includes a DS1307 real-time clock, so your Pi can keep accurate time even after reboots or power loss — perfect for clock and time-...

SKU: AF-2324 · MPN: 2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: AF-3578 · MPN: 3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, di...

SKU: AF-3785 · MPN: 3785

This isolated PoE splitter takes a unified Power over Ethernet signal from a single RJ-45 cable and separates it into data (Ethernet) and regulated 5V DC power via a Micro USB plug. It works with any 802.3af-capable router or switch, letting you power non-PoE devices over a standard Ethernet run ...

SKU: AF-2423 · MPN: 2423

The Adafruit PiTFT Plus 2.8" Capacitive Touchscreen is a finger-friendly colour display for the Raspberry Pi. Unlike resistive touchscreens that need a stylus or fingernail, this capacitive version responds to a light finger touch and features a polished black bezel with a glass overlay for a cle...