All Products
AI Overview
Results for “featherwing” are Adafruit FeatherWing add-on boards (expansion boards that plug into any Adafruit Feather). Popular picks by use-case:
Displays
- Adafruit FeatherWing 128x64 OLED Add-on — 128×64 monochrome OLED with 3 buttons ($39.20)
- Adafruit 2.9 Grayscale eInk / ePaper Display FeatherWing - 4 Level Grayscale — 2.9" 296×128 4-level grayscale ePaper ($45.20)
- TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers — 2.4" 320×240 touchscreen + microSD slot ($74.75)
Input / Controls
- Adafruit Joy FeatherWing for all Feathers — 2-axis joystick + 5 buttons over I2C ($20.00)
Wireless Radio
- Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz — LoRa long-range at 900 MHz ($41.55)
- Adafruit LoRa Radio FeatherWing - RFM95W 433 MHz — LoRa at 433 MHz ($41.55)
- Adafruit Radio FeatherWing - RFM69HCW 900MHz — FSK packet radio at 900 MHz ($20.70)
- Adafruit Radio FeatherWing - RFM69HCW 433MHz — FSK packet radio at 433 MHz ($20.95)
Audio
- Adafruit Music Maker FeatherWing - MP3 OGG WAV MIDI Synth Player — VS1053 codec for MP3/OGG/WAV/MIDI playback/synth ($41.60)
- Music Maker FeatherWing w/ Amp - MP3 OGG WAV MIDI Synth Player [Stereo 3W Amplifier] — same, plus stereo 3W amp ($52.15)
Power / I/O / Prototyping
- Adafruit Power Relay FeatherWing — switch higher-power loads with a relay output ($21.75)
- USB Host FeatherWing with MAX3421E — adds USB host via MAX3421E ($36.75)
- Assembled Terminal Block Breakout FeatherWing for all Feathers — easier wiring via screw terminals ($32.70)
- FeatherWing Tripler Mini Kit - Prototyping Add-on For Feathers — connect 1 Feather + 2 FeatherWings side-by-side ($17.10)
Sensors
- Adafruit AMG8833 IR Thermal Camera FeatherWing — 8×8 IR thermal camera array ($94.20)
Which type of FeatherWing are you looking for?
Showing 61-80 of 100 products
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - White
·
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in white pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - Green
·
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in green pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 ...
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - Yellow
·
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in yellow pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33...
Adafruit 0.8 8x16 LED Matrix FeatherWing Display Kit - Red
·
The Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit in red pairs two miniature 8x8 LED matrices with a FeatherWing driver board to create a 128-pixel display for any Feather microcontroller. Use it for scrolling text, bitmap graphics, emoticons, or simple animations. The onboard HT16K33 I2...
Adafruit 2.13 Monochrome eInk / ePaper Display FeatherWing - 250x122 Black and White
·
Add a crisp, paper-like display to your Feather project with the Adafruit 2.13" Monochrome eInk FeatherWing. This 250×122 pixel black-and-white eInk panel delivers excellent daylight readability and retains its image even with power completely disconnected — just like printed paper. The FeatherW...
Adafruit Quad Side-By-Side FeatherWing Kit with Headers
·
The Adafruit Quad Side-By-Side FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a linear side-by-side layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and grou...
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
·
Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your main Feather can focus on your application logic. The ESP32 communicates over ...
Grove Shield FeatherWing for Particle Mesh and all Feathers
·
The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feathe...
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
·
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Feather to four SparkFun Qwiic / Stemma QT c...
Adafruit ISM330DHCX + LIS3MDL FeatherWing - High Precision 9-DoF IMU
·
The Adafruit ISM330DHCX + LIS3MDL FeatherWing combines two precision ST sensors to deliver 9 degrees of freedom — accelerometer, gyroscope, and magnetometer — in the Feather form factor. Stack it onto any Feather board for industrial-quality motion sensing with AHRS orientation capability. The I...
Adafruit LSM6DSOX + LIS3MDL FeatherWing - Precision 9-DoF IMU
·
The Adafruit LSM6DSOX + LIS3MDL FeatherWing is a precision 9 Degree of Freedom (9-DoF) IMU add-on for any Feather board. It combines the LSM6DSOX accelerometer/gyroscope — known for its exceptionally low gyro drift and noise — with the LIS3MDL magnetometer for complete orientation and heading sen...
Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic
·
The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor....
Adafruit MIDI FeatherWing Kit
·
The Adafruit MIDI FeatherWing Kit adds MIDI input and output to any compatible Feather board. Featuring both DIN-5 MIDI jacks, a 3.3V optical isolator for safe MIDI input, and indicator LEDs for transmit/receive activity, this FeatherWing makes it easy to build MIDI controllers, synthesisers, and...
Adafruit 2.9 Tri-Color eInk / ePaper Display FeatherWing - Red Black White
·
Add a vibrant tri-colour eInk display to your Feather project with this 2.9" FeatherWing. The panel displays red, black, and white pixels at 296×128 resolution that remain visible even with power completely disconnected — just like printed paper, but with the added impact of colour. The FeatherW...
Adafruit 2.13 HD Tri-Color eInk / ePaper Display FeatherWing - 250x122 RW Panel with SSD1680
·
The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...
NeoKey FeatherWing - Two Mechanical Key Switches with NeoPixels
·
The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gateron, etc.) without soldering, using Kailh hot-swap sockets. A reverse-mount Ne...
Adafruit Quad 2x2 FeatherWing Kit with Headers
·
The Adafruit Quad 2×2 FeatherWing Kit lets you connect one Feather board to three FeatherWings simultaneously in a compact 2×2 grid layout — no stacking headers needed. All four sets of Feather pins are cross-connected, so every FeatherWing shares the same bus signals, power, and ground. Each of...
Adafruit Floppy FeatherWing with 34-Pin IDC Connector
The Adafruit Floppy FeatherWing lets you read and write 3.5-inch or 5.25-inch floppy disks using a Feather microcontroller. It connects to standard 34-pin IDC floppy drives and includes built-in level shifting between 3.3 V Feather logic and the 5 V signals that floppy drives require. Floppy dri...
Adafruit CAN Bus FeatherWing - MCP2515
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps over a two-wire differential bus. Only an SPI port and two pins (chip-select and ...
Adafruit TFT FeatherWing - 3.5" 480x320 Capacitive Touchscreen
·
The Adafruit TFT FeatherWing is a 3.5" colour display with a 480×320 resolution, bright white-LED backlight, and a built-in multi-touch capacitive touchscreen that detects up to 5 simultaneous finger presses. It plugs directly into any Adafruit Feather board, making it an easy way to add a high-r...
