All Products

SKU: AF-5166

A bite-sized, satisfying clicky key switch keychain with a built-in red LED. Press the button to light it up — perfect for showing off etched glow-through keycaps or just keeping your fidgety hands busy. Powered by a CR1220 coin cell battery, the keychain includes a cord for attaching to your ba...

SKU: SF-DEV-09267

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V analogue signals on the X, Y, and Z axes. The board features large sewable pads...

SKU: SF-DEV-13342

The LilyPad Arduino 328 Main Board is an Arduino-programmed microcontroller designed to be easily integrated into e-textiles and wearable projects. It offers the same functionality you find in other Arduino boards, in a lightweight, round package designed to minimize snagging and profile, with wi...

SKU: SF-DEV-12049

The LilyPad Arduino USB is a sewable microcontroller board built around the ATmega32U4 with native USB support — just plug in a micro-USB cable to program, no external FTDI adapter needed. Officially supported in the Arduino IDE, it runs at 3.3V and features a JST connector for a rechargeable LiP...

SKU: LB-BK-LR0347A

A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accepts a standard 20 mm coin cell battery (CR2032) and features sewable tabs for eas...

SKU: SF-DEV-08776

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyP...

SKU: DF-SEN0057

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. LilyPad is a wearable e-textile technology developed by Leah Bue...

SKU: SF-DEV-08463

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud. Please note: This is an inductive buzzer meaning that is will act as ...

SKU: SF-DEV-14546

The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards, the individual pieces of the board are pre-wired — allowing you to try out the function of the circuit bef...

SKU: SF-KIT-14528

The LilyPad E-Sewing ProtoSnap Kit is a great way to incorporate buttons and switches into an e-textile project without any programming required. Like other LilyPad ProtoSnap series boards, the individual pieces of the included E-Sewing ProtoSnap are pre-wired — allowing you to try out the f...

SKU: SF-DEV-14011

This is a simple pack of five Green LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by L...

SKU: SF-DEV-14013

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0.8 mm PCB lies flat against fabric. Key Features 5× Red LEDs – Snap-apart stri...

SKU: SF-DEV-14014

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by ...

SKU: SF-DEV-14012

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-textile technology developed by Dr. Leah Buechley and cooperatively designed by Le...

SKU: DF-DFR0167-B

Here is a simple 5 pack of blue LED for LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clot...

SKU: DF-DFR0167-G

A pack of five green LEDs designed for the LilyPad wearable electronics platform. Each LED is mounted on a thin, sewable PCB with large connecting pads, making it easy to stitch into clothing and e-textile projects with conductive thread. Key Features Green LEDs – Bright, visible output for we...

SKU: DF-DFR0199-B

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of blue LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller ve...

SKU: DF-DFR0199-G

The LilyPad LED Micro is a tiny surface-mount LED board designed for e-textile and wearable electronics projects. At just 3.2 × 1.6mm, it's one of the smallest ways to add a point of light to your LilyPad creations — perfect for elegant designs or sheer fabrics where you need minimal weight and b...

SKU: DF-DFR0199-R

This LilyPad LED Micro is Discontinued Now, We recommend other LilyPad as a suitable replacement. Here is a simple 5 pack of red LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smal...

SKU: DF-DFR0199-W

Here is a simple 5 pack of white LED micro for LilyPad. Need a smaller way to add some 'twinkle' to your LilyPad project? Then you need some LilyPad Micros! A LilyPad Micro is like a smaller version of the LilyPad LED board. By eliminating the resistor and changing the orientation of the...