All Products
AI Overview
For a basic 2-wheel build, Robot Chassis base with 2 wheels with AA-Battery Pack ($22.65) includes motors, wheels, and a battery pack; Robot Chassis base with 2 wheels ($29.85) adds a caster wheel for balance. Add your own control electronics. For a sturdier metal 2WD platform, consider the Mini Round Robot Chassis Kit ($40.10) or Mini 3-Layer Round Robot Chassis Kit ($50.15). For more traction, choose the 4WD WAVE ROVER ($147.70), or a tracked chassis such as the Black Gladiator ($48.15) or Rover 5 with encoders ($103.00).
What kind of robot chassis are you building with?
Showing 41-60 of 100 products
SparkFun RedBot Sensor - Line Follower
The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transitions from light t...
Micro Metal Gearmotor 30:1
This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch), or you can use the mounting bracket or extended mounting brac...
10 sets M3x25 screw low profile hex head cap screw
A 10-pack of M3 × 25mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...
10 sets M3x12 screw low profile hex head cap screw
A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...
10 sets M3x30 screw low profile hex head cap screw
A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...
10 sets M3x20 screw low profile hex head cap screw
A 10-pack of M3 × 20mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...
10 sets M3x16 screw low profile hex head cap screw
A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...
10 sets M3x6 screw low profile hex head cap screw
A 10-pack of M3 × 6mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (All...
10 sets M3x10 screw low profile hex head cap screw
A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cleaner finish. Key Features Hex Socket Drive – Secure fastening with a hex (Al...
Micro Gearmotor - 175 RPM (6-12V)
This micro gearmotor features full metal gears for exceptional durability and a 150:1 gear ratio that delivers up to 175 RPM at 12V with 45 oz-in of stall torque. The compact form factor and 3mm D-shaft make it ideal for small robotics projects and mechanisms. Specifications Voltage: 6–12V Ge...
SparkFun Ardumoto Shield Kit
Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, ...
D65 wheel set - Blue
The D65 Wheel Set includes a pair of 65 mm (2.56″) blue rubber wheels, two wheel-motor adapters, and two micro DC geared motors — everything you need to add powered drive wheels to a small robot chassis. Compatible with popular DFRobot platforms including the Turtle 2WD, Pirate 4WD, and Baron 4W...
10 sets M3 * 30 nylon standoffs
A 10-pack of M3 × 30mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking short circuits. The male/female design allows standoffs to be stacked for even ...
10 sets M3 * 30 hexagonal standoffs mounting kit
A 10-pack of M3 × 30mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 30mm spacing and secure mechanical support. The male/female design allows standoffs to be stacked for even greater clearance. At 30mm height, ...
10 sets M3 * 20 hexagonal standoffs mounting kit
A 10-pack of M3 × 20mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 20mm spacing and secure mechanical support. The male/female design allows standoffs to be stacked for even greater clearance. Ideal for multi-...
10 sets M3 * 20 nylon standoffs
A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking short circuits. The male/female design allows standoffs to be stacked for even ...
Mini Bread Board Self Adhesive - Red
A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Arduino Proto Shield. Key Features 170 Tie Points – 17 × 5 × 2 point layout Sel...
Metal ball casters
A sturdy metal ball caster made from 1 mm stamped steel plate, capable of supporting loads up to 15 kg. At just 37 g and 20 mm tall, it provides smooth omnidirectional movement without adding significant weight to your robot chassis. The caster uses 40 small bearing balls around the main 15 mm s...
16mm Height Metal Caster Bearing Wheel
·
A compact steel ball caster that provides smooth, omnidirectional movement for small robots and wheeled projects. With a 16mm overall height, it's well-suited as a third support point for two-wheeled robot chassis. Easy to mount with two screw holes spaced approximately 10.5mm apart — compatible...
20mm Height Metal Caster Bearing Wheel
·
A durable steel ball caster with smooth, fluid motion — ideal for providing a third contact point on small robot platforms. The 20mm overall height pairs well with common robot chassis and TT motor setups, and the two screw mounts make it easy to attach to any material. Key Features Steel Ball...
