All Products

SKU: DF-DRI0058 · MPN: DRI0058

This compact DFRobot driver board is made for precise control of brushless DC motors using Field-Oriented Control (FOC). At just 26 x 21.5mm, it is well suited to tight builds where smooth motion, low noise and responsive control matter.SimpleFOCmini supports closed-loop control of motor position...

SKU: AF-2324

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell backup — perfect for outdoor projects, time synchronisation, and location-aware ap...

SKU: EC-RPA03024P

This smart fan and power expansion board are designed for DIY makers, especially for Raspberry Pi lover, it is compatible with Raspberry Pi 3/ 2B/ B+. Built-in temperature sensor, with active cooling fan, you can control flexibly the ON/OFF of mini fan via I2C command and GPIO programming. The...

SKU: PR-PIM373

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for proximity sensing, presence detection, and collision avoidance on robots. This b...

SKU: AF-353

A high-capacity 3.7 V lithium-ion battery pack built from three 2200 mAh 18650 cells connected in parallel, providing 6600 mAh of total capacity. The cells are spot-welded to a built-in protection circuit that guards against overcharging, over-discharging, and overcurrent. The pack includes a JS...

SKU: PL-2851

The Pololu D24V50F5 is a high-efficiency step-down (buck) voltage regulator that converts input voltages up to 38V down to a fixed 5V output. With a typical maximum output current of 5A and efficiency between 85% and 95%, it far outperforms linear regulators — especially when the input-to-output ...

SKU: WS-21743

WAVEGO, 12-DOF bionic dog-like robot, open source for ESP32 and PI4B, facial recognition, color tracking, motion detectionHigh-DOF bionic quadruped robotPowered by ESP32 sub controller & Raspberry Pi 4B host controllerThe WAVEGO is a high-DOF bionic dog-like robot which features 2.3kg.cm large to...

SKU: SF-LCD-29467 · MPN: LCD-29467

  The SparkFun Red Vision Touch Display for Pico features a 2.0", 320x240px capacative touch LCD mounted on a breakout board designed to plug directly into the Control Board on the Experiential Robotics Platform (XRP) Kit as well as Raspberry Pi Picos. This display board includ...

SKU: DF-SEN0638 · MPN: SEN0638

HUSKYLENS 2 is a powerful AI vision sensor with a 1.6GHz dual-core processor and 6 TOPS AI accelerator. With 20+ built-in AI models and the ability to train and deploy custom YOLO models, it brings advanced computer vision to Arduino, Raspberry Pi, and micro:bit projects. The unique MCP (Model Co...

SKU: AF-1906

The Pixy2 (CMUcam5) is a smart vision sensor that can be taught to detect objects, track lines, and identify intersections — all at 60 frames per second. It offloads image processing from your microcontroller, sending only the relevant data you need. Pixy2 uses hue and saturation for detection r...

SKU: DF-FIT0539

A robust battery holder designed to house three 18650 lithium-ion cells in series, delivering a nominal 11.1V output through a standard DC 2.1mm power jack. Ideal for powering projects, robots, and portable electronics that require higher voltage from rechargeable cells. The holder features a du...

SKU: AF-4411

A compact NEMA-8 bipolar stepper motor with the same 1.8° step angle (200 steps/revolution) as full-size NEMA-17 motors, but in a much smaller 20 × 30 mm package. Ideal for compact CNC builds, small robotics, and space-constrained motion control projects. This 4-wire bipolar stepper is rated for...

SKU: WS-24760

A compact uninterruptible power supply (UPS) module that supports simultaneous charging and power output. When external power is connected, it charges the batteries while providing a stable 5V output. If external power is lost, it automatically switches to battery power without interruption — kee...

SKU: LB-LS0469

A simple and reliable SPST toggle switch for controlling power in your electronics projects. Flip the lever to switch between ON and OFF positions — ideal for powering circuits, motors, LEDs, and other 12V loads. Key Features SPST Configuration – Single Pole, Single Throw with two terminal con...

SKU: AF-1968

An unassembled mini pan-tilt bracket kit that provides two-axis motion for cameras, sensors, or other small payloads. The mechanism pans approximately 180° side to side and tilts approximately 150° downward, depending on the servos used. This version comes without servos, so you can pair it with...

SKU: DF-SEN0631 · MPN: SEN0631

##Introduction The IMX219-120-4Lane 8MP Camera Module is a high-performance imaging solution designed for the Raspberry Pi 5, offering a wide 120° field of view. Featuring the Sony IMX219 photosensitive chip, this camera captures sharp, high-resolution images with a 3280x2464 resolution. The MIPI...

SKU: LB-BK-LR0259-10

A bulk pack of ten 9-gram micro servos — an affordable way to stock up for robotics, mechatronics, and RC projects. Each servo includes a ~25cm cable with a standard 3-pin female header, plus a full set of horn and screw accessories. These compact servos deliver 1.6 kg/cm of torque at 6.0V with ...

SKU: DF-SEN0305-2 · MPN: SEN0305-2

This kit combines the HUSKYLENS AI machine vision sensor with DFRobot's Devastator Tank Mobile Robot Platform and the Romeo V2 Arduino robot board. It is designed for building vision-enabled robots without needing to write complex image-processing algorithms from scratch.HUSKYLENS can recognise f...

SKU: DF-SEN0628 · MPN: SEN0628

This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interactive project a much better sense of what is in front of it.Onboard firmware runs o...

SKU: DF-DFR1237 · MPN: DFR1237

Build edge AI, vision and interactive HMI projects around the ESP32-P4, a dual-core RISC-V processor with a single-precision FPU and hardware-accelerated H.264 video encoding at 1080p@30fps. This kit is designed for applications such as AI cameras, smart displays, video doorbells, robot vision sy...