All Products

SKU: WS-18014

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...

SKU: LB-RPI5-STARTER-4GB

Everything you need to get started with the Raspberry Pi 5 in one kit. Includes the Raspberry Pi 5 board, an official case, a pre-loaded SD card with Raspberry Pi OS, an RTC battery, a micro HDMI cable, a retro gaming controller, and a beginner's guidebook. Kit Contents 1× Raspberry Pi 5 1× Off...

SKU: PR-PIM301

Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Our SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female header onto Button S...

SKU: AF-4897

A 40-pin FPC to right-angle 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT...

SKU: AF-4904

A 40-pin FPC to straight 2×20 IDC male plug header adapter board. Converts a standard 40-pin 0.5mm pitch FPC/FFC cable connection into a male GPIO plug, allowing you to connect HATs and Bonnets at a distance from your Raspberry Pi via a slim, flexible cable. Insert the male plug into your HAT or...

SKU: WS-21706

EM06-E LTE Cat-6 HAT for Raspberry Pi, dual antennas LTE-A, multi regions multi band, GNSSEM06-E LTE Cat-6 HAT for Raspberry PiSupports LTE-A and UMTS/HSPA(+) multi networksmulti-constellation high-accuracy GNSS, cloud platform communication, LTE-A networkingFeatures at a glanceThis is an LTE Cat...

SKU: PI-COM0002

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving access to the GPIO pins underneath. Key Features 40-Pin (2×20) – Matches the...

SKU: AF-2248

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your ...

SKU: AF-2256

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to yo...

SKU: AF-2335

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to ...

SKU: AF-2334

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your room...

SKU: YH-6000300079

A GPIO expansion board that multiplies a single Raspberry Pi 40-pin GPIO header into three parallel rows. This allows you to stack multiple HATs, breakout boards, or jumper wire connections on the same set of GPIO pins simultaneously. Key Features 1-to-3 GPIO Expansion – Three full 40-pin head...

SKU: PH-TPH-056

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera. Easy to assemble, the plate attaches to your High Quality Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are included in the pack. Availabl...

SKU: PH-TPH-053

An affordable, simple solution to mounting your Raspberry Pi to your Raspberry Pi High Quality Camera. Easy to assemble, the plate attaches to your High Quality Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are included in the pack. Availabl...

SKU: AF-5026

This mounting plate kit is an affordable, simple solution to mounting your Raspberry Pi 4 or Model 3 B+ to your Raspberry Pi HQ Camera.  Easy to assemble, the plate attaches to your HQ Camera on one side, and your Raspberry Pi mounts to the other side – spacers and fixings are incl...

SKU: WS-21354

A protective ABS case designed for the Raspberry Pi Zero series, compatible with the Zero, Zero W, and Zero 2 W. The case features precise cutouts for all connectors and a reversed GPIO slot for easy access to the header pins. Key Features Material – Durable ABS plastic Compatibility – Fits R...

SKU: WS-31523 · MPN: 31523

Transform your innovative projects with the ESP32-P4 Round Touch Display Development Board — your gateway to next-level interaction in the world of IoT. Whether you opt for the crisp clarity of the 3.4-inch, 800×800 resolution display or the bright each device is designed to offer a truly immersi...

SKU: PH-106463

KKSB Aluminum Case for Raspberry Pi 5—Built for Makers, by MakersMeet the ultimate shell for your Pi 5—rugged, stylish, and ready for action! The KKSB Case is crafted from sandblasted black anodized aluminum, delivering top-tier protection, primo heat dissipation, and hacker-chic looks to your ne...

SKU: RP-SC0513 · MPN: SC0513

The Raspberry Pi 400 is a complete personal computer built into a compact keyboard. Powered by a 1.8 GHz quad-core ARM Cortex-A72 processor (a faster variant of the Raspberry Pi 4), it delivers desktop-class performance — just connect a monitor, mouse, and power supply to get started. With dual ...

SKU: RP-SC0326 · MPN: SC0326

The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4. It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.The IO board is designed to allow you to create systems quickly using off-the-shelf ...