All Products
Showing 41-60 of 86 products
RedBear Duo
The RedBear Duo is a thumb-sized IoT development board with built-in Wi-Fi, Bluetooth 4.1 (dual mode), and Particle cloud connectivity. Everything you need to prototype connected devices is on board — just add your idea. Powered by an STM32F205 ARM Cortex-M3 at 120 MHz with Broadcom BCM43438 wir...
Adafruit PyGamer for MakeCode Arcade, CircuitPython or Arduino
·
The Adafruit PyGamer is a pocket-sized, open-source gaming handheld built for DIY game development and retro emulation. Powered by the ATSAMD51 running at 120 MHz with 512 KB flash and 192 KB RAM, it features an analog thumbstick, six tactile buttons, a colour TFT display, and stereo audio — all ...
Adafruit MONSTER M4SK - Two Eyes are Better Than One!
·
The Adafruit MONSTER M4SK is a dual-display development board designed for creating animated electronic eyes for costumes, props, and interactive projects. Powered by a 120 MHz ATSAMD51 Cortex M4 processor, it drives two 240×240 pixel IPS TFT displays with smooth, real-time 3D eyeball animations ...
Stick C including 80mAh-Battery + Watch Accessories + USB Cable
Noted: Stick C ETD on Oct.10, thanks for the understanding. M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board. What it can do? This tiny block is able to realize your idea, enlighten your creativity, and help with ...
Encoder Panel For FACES Kit (SK6812)
Description FACES Kit is a feast of functional panels, contains the most commonly used panels and keyboards with MEGA328processor inside, communication protocol through IIC(0x08) as slave mode. With these 3 different panels, it will be very easy to support keyboard interaction with y...
Maker Pi Pico Base - Raspberry Pi Pico Not Included
·
Cytron's Maker Pi Pico Base incorporates the most wanted Reset button for your Raspberry Pi Pico and gives you access to all GPIO pins on two 20-pin headers, with clear labels. Each GPIO is paired with an LED indicator for convenient code testing and troubleshooting. The bottom of the board even ...
BeaglePlay
BeaglePlay is an open-source single board computer built around the Texas Instruments AM6254 processor (quad-core ARM Cortex-A53) with 2GB DDR4 RAM and 16GB eMMC storage. It is designed to simplify connecting sensors, actuators, and human interfaces to a reliable embedded Linux system. The board...
Seeed Studio XIAO ESP32C3
The Seeed Studio XIAO ESP32C3 is a compact microcontroller board built around the ESP32-C3 RISC-V SoC. It features complete Wi-Fi and Bluetooth 5.0/BLE connectivity in the signature XIAO thumb-sized form factor (21 × 17.8 mm), making it well suited for IoT, wearables, and low-power wireless proje...
Gravity IoT Starter Kit for micro:bit
IoT Starter Kit is an all-in-one bundle for micro:bit beginners to fast experience and build Internet of Things projects.The kit comes with a micro:bit microcontroller, a Wi-Fi module and 7 sensors/actuators that are wildly used in real-life IoT applications.You can easily setup the Wi-Fi connect...
Trace Unit (For Lidar Bot/Bala)
Description TRACE is mainly consist of 4 sets of IR, 1x infrared emitting and 1x infrared receiver for each set. The infrared LEDs should be placed towards and close to the ground where having black tracing lines and white background (or vice versa) layouts. The IR transmitter keep emitti...
Grove Inventor Kit for micro:bit
Expand your micro:bit with the Grove Inventor Kit – a complete package of sensors, displays, and actuators that connect without soldering. The kit includes a Grove shield that adds plug-and-play Grove ports to your micro:bit, plus 8 carefully selected modules to get you building projects immediat...
Grove to Pin
1. Grove to GroveGROVE 2 GROVE is a GROVE extension connector. Two female GROVE port sit back-to-back. One common use of this part is for the RGB LED strip extension. Feature:GROVE-to-GROVERGB LED strip extensionpackage includes: 5x connector2. Grove to PinGROVE 2 PIN is a GR...
Grove Cable Pigtail - 2mm pitch 100mm long
·
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch), 4-pin Length – 100 mm Wires – 4 (bare ends) Wire Colours Black – GND Red...
RBG LED is a extendable strip light with RGB LED 200cm
A 200 cm extendable RGB LED strip using digitally addressable WS2811 NeoPixel LEDs with a Grove connector. Each LED can display its own colour and brightness independently, and multiple strips can be daisy-chained together to create longer displays. Compatible with M5Stack units via the Grove A ...
RBG LED is a extendable strip light - 50cm
A 50 cm addressable RGB LED strip unit with digitally controllable NeoPixel (WS2811) LEDs. Each LED can display any RGB colour and brightness individually via a single-bus protocol. The strip connects via a Grove cable and is extendable — multiple strips can be daisy-chained together for longer d...
Grove - Mini Fan v1.1
Features Easy to use Cartoon Style mini fan Soft fan-blade to avoid injuries Built-in programmable microcontroller that uses Arduino IDE You can change the code to drive servo motors instead of DC motor Description Hey hey, calm down, have some fresh air here. The Grove – Mini Fan v1.1 can be ...
JST PH 4-Pin Socket to Color Coded Cable - 200mm
·
This cable will let you turn a JST PH 3-pin cable socket into 4 individual tinned wires. These are great to match up with our JST 4-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! Black for GND Red for V+ White for SDA Green for SCL Even though...
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
·
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA bre...
Grove - Starter Kit for Arduino
The Grove Starter Kit for Arduino from Seeed Studio is a beginner-friendly electronics kit built around the Grove modular connector system. It includes a Base Shield with multiple Grove connectors, twelve plug-and-play modules, and a user manual to help you get started quickly — no soldering or c...
Qwiic Cable - Grove Adapter (150mm)
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...
