All Products

SKU: PR-PIM376

This 6 Degrees of Freedom Motion Sensor Breakout can detect acceleration in three axes - X, Y, and Z - as well as three axes of magnetic heading. It's ideal for building into robots, rockets, and rovers, or anywhere else where you want to measure motion accurately. It's compatib...

SKU: AF-3093

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifier — all managed over I2C via the Adafruit see...

SKU: SF-SEN-14678

The Pixy2 CMUcam5 is smaller, faster and more capable than the original Pixy. Like its predecessor, the Pixy2 can learn to detect objects that you teach it, just by pressing a button. Additionally, the Pixy2 has new algorithms that detect and track lines for use with line-following robots. Wit...

SKU: DF-SEN0265

The Pixy2 (CMUcam5) is a fast, compact vision sensor for robotics that can detect objects, track colours, follow lines, and read small barcodes — all at 60 frames per second. Teach it to recognise objects by pressing a button, and it returns X/Y coordinates, size, and unique IDs for each detected...

SKU: ET-2479888

CodeBug™ is a fun, engaging, entry level introduction to simple programming and electronic concepts to anyone, at any age. It is easy to program using the online interface, which features colourful drag and drop blocks, an in-browser emulator and engaging community features. It enables you to cre...

SKU: AF-4343

The Adafruit MONSTER M4SK is a dual-display development board designed for creating animated electronic eyes for costumes, props, and interactive projects. Powered by a 120 MHz ATSAMD51 Cortex M4 processor, it drives two 240×240 pixel IPS TFT displays with smooth, real-time 3D eyeball animations ...

SKU: DF-SEN0313

A waterproof ultrasonic distance sensor with UART serial output. The A01NYUB measures distance by timing the ultrasonic pulse echo and outputs the result directly via asynchronous serial at 9600 bps — no external signal processing needed. With the included removable bell-mouth fitted, the effecti...

SKU: DF-SEN0307

The DFRobot URM09 is an analog output ultrasonic distance sensor optimised for fast ranging and obstacle avoidance. With a maximum measurement rate of 30Hz, built-in temperature compensation, and a range of 2–500cm, it's a capable and easy-to-use sensor for robotics, automation, and detection pro...

SKU: YH-6000200084

This is a very cool and completely functional tracked tank robot with Arduino UNO as the core controller. The entire vehicle adopts 2mm blue thickened aluminum alloy frame. Most of the components are connected with screw and copper pillar, and a few parts are designed with the anti-reverse socket...

SKU: DF-SEN0305-S

HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, color recognition, and tag(QR code) recognition.Through the UART / I2C port, HuskyLens can connect popular main control board...

SKU: AF-4681

The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or other sensors without manual calibration or conversion. Packaged on a STEMMA QT...

SKU: LB-LS0633

A pack of 50 through-hole photoresistors (light-dependent resistors / LDRs) with a 5 mm diameter sensing element. These components change their resistance based on the amount of light hitting the sensor — resistance decreases as light intensity increases — making them a simple and inexpensive way...

SKU: PR-PIM617

A compact motor driver add-on for the Raspberry Pi Pico, based on the DRV8833 dual H-bridge. Solders directly to the back of a Pico and provides two JST-ZH connectors for micro metal gearmotors. Also includes a user button and a Qw/ST (Qwiic/STEMMA QT) connector for attaching I²C breakout boards....

SKU: PR-PIM622

A sophisticated distance sensor with 8x8 multizone ranging and a wide field of view - great for robots and advanced motion sensing. This sensor measures distance by beaming low powered infrared lasers at a target (pew pew pew). It has great accuracy and sampling frequency (up to 60 Hz) and a la...

SKU: LB-OWL-CHASSIS

This two-wheel robot chassis provides a ready-to-build platform for your own robotics projects. It comes with two DC motors and wheels, plus a caster wheel for balance — just add your own controller board (Arduino, Micro:bit, Raspberry Pi, or similar) and a motor driver to get moving. The transp...

SKU: WS-23884

Uninterruptible Power Supply (UPS) Module, Supports charging And Power output at the same time, 3S & 5V 5A Output Uninterruptible Power Supply Module 3S  Supports charging and power output at the same time, 3S * & 5V 5A output   * 3S indicates that powered by 3x 18650 Li batteries...

SKU: WS-25376

Full metal body · Onboard ESP32-WROOM-32 · Multiple host support The WAVE ROVER is a rugged, all-metal 4WD robot chassis for makers, students and researchers who want a capable mobile platform without building one from scratch. Its entire codebase is open source, it ships with an onboard ESP32 co...

SKU: WS-24760

A compact uninterruptible power supply (UPS) module that supports simultaneous charging and power output. When external power is connected, it charges the batteries while providing a stable 5V output. If external power is lost, it automatically switches to battery power without interruption — kee...

SKU: WS-25514

The Bus Servo Adapter (A) is a compact driver board that integrates power supply and control circuitry for ST/SC series serial bus servos. It supports controlling up to 253 servos simultaneously over a single UART channel, with position, speed, torque, and operating mode feedback from each servo....

SKU: SF-ROB-22727 · MPN: ROB-22727

The SparkFun XRP Controller is the brain of the Experiential Robotics Platform (XRP), a hands-on educational robotics system designed for middle and high school students. Built around a Raspberry Pi Pico W, it provides WiFi and Bluetooth connectivity, a 6-axis IMU, dual motor drivers, and a Qwiic...