All Products

SKU: LB-FLAME-LIGHT

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it provides both digital and analogue output for flexible integration with Arduino, Ra...

SKU: LB-LR0231

A 4×4 matrix membrane keypad with 16 tactile buttons, ideal for adding user input to microcontroller projects. The keypad uses a standard 8-pin matrix wiring scheme (4 rows × 4 columns), requiring only 8 GPIO pins to read all 16 keys. The flexible membrane design is thin and lightweight, making ...

SKU: LB-C-W

A versatile 1m USB-A to USB-C cable for everyday charging and data transfer. The standard length provides flexibility for desk setups, reaching from wall chargers, or connecting devices across your workspace. Key Features 1m Length – Versatile length for desk use, wall chargers, and general co...

SKU: LB-C-25

A compact 25cm USB-A to USB-C cable for charging and data transfer. The short length keeps your desk tidy, reduces cable clutter, and is perfect for portable power banks or tight workspaces. Key Features 25cm Length – Compact size ideal for travel, power banks, and clutter-free setups 3A Char...

SKU: AF-484

An embroidered skill badge celebrating the achievement of learning microcontrollers — from Arduino and Raspberry Pi to ARM, PIC, and beyond. A fun way to recognise and reward skill-building in classrooms, workshops, makerspaces, and Maker Faires. Key Features Iron-On or Sew-On – Iron-on backin...

SKU: DF-DFR1193 · MPN: DFR1193

The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address conversion happens in hardware with no code changes required. Key Features Ha...

SKU: ET-2085464

A 1-metre USB Type-A male to Micro-B male cable for powering and connecting devices such as Raspberry Pi, Arduino, and other microcontrollers. Suitable for both data transfer and power delivery via any standard USB power source. Specifications Connector A: USB Type-A male Connector B: USB Mic...

SKU: DF-SEN0153

The URM07 is an ultra-low-power UART ultrasonic distance sensor with an effective range of 20–750 cm. Operating on 3.0–5.5 V, it is directly compatible with 3.3 V and 5 V microcontrollers including Arduino and Raspberry Pi. With an average operating current of just 5 mA and standby current under ...

SKU: DF-SEN0213

The DFRobot Gravity Heart Rate Monitor Sensor measures the electrical activity of the heart and outputs it as an analog signal. Built around the AD8232 chip, it filters and amplifies the ECG signal to produce a clean waveform from the PR and QT intervals — viewable in real time using the Arduino ...

SKU: AF-245

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of microcontrollers including Arduino and Raspberry Pi. The modular form factor plugs...

SKU: AF-1787

A quad level-shifting buffer IC that excels at converting 3V logic signals up to 5V. Power the 74AHCT125 with 5V and it will cleanly detect 3.3V logic inputs — particularly useful when connecting devices like Teensy 3.x to NeoPixels or other 5V peripherals. To use, apply 5V to VCC, connect GND, ...

SKU: LB-LR0001

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project.  Compatible with Arduino, Raspberry Pi, Micro:bit and other microcontrolle...

SKU: DF-SEN0321

The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via I2C through DFRobot's Gravity 4-pin interface. Compatible with Arduino, ESP32,...

SKU: DF-DFR0913

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrollers. Each channel features photoelectric isolation for reliable signal separation...

SKU: AF-5378

The Adafruit Right Angle VEML7700 Lux Sensor is an I2C ambient light sensor that measures calibrated lux values rather than arbitrary brightness numbers. Its unique right-angle orientation senses light coming parallel to the PCB surface rather than perpendicular — ideal for edge-lit enclosures an...

SKU: AF-6109 · MPN: ADA6109

The Adafruit A4988 Stepper Motor Driver Breakout simplifies stepper motor control down to just two pins — a direction pin and a step pin. Each pulse on the step pin advances the motor by one step or microstep, making it straightforward to achieve precise, controlled motion without complex timer o...

SKU: DF-DFR1034 · MPN: DFR1034

##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outp...

SKU: DF-DFR1037 · MPN: DFR1037

##Introduction This is a 2-channel analog voltage output DAC module with PWM communication, 8-bit resolution, and 0.5% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outpu...

SKU: DF-DFR1035 · MPN: DFR1035

##Introduction This is a 1-channel analog voltage output DAC module with I2C communication, 15-bit resolution, and 0.01% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal out...

SKU: PH-106133 · MPN: 106133

The Power Bank KeepAlive (USB-C) prevents power banks from automatically shutting off when connected to low-power devices. It uses a 555 timer circuit to pulse a small amount of current through the USB-C port, keeping the power bank active even when drawing minimal power. This assembled SMD vers...