All Products
Showing 41-60 of 100 products
Romeo ESP32-C3 Robot Control Board (Supports Wi-Fi; Bluetooth 5)
·
The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gravity-compatible I/O interfaces — all in a tiny 47mm × 38.5mm form factor. A bu...
Clear Enclosure for Arduino or Metro
·
This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it for sure with the Arduino UNO R3, Adafruit Metro and Adafruit Metro Express. It's clear so you can see all your onboard LEDs and silkscreen labels. There are four small screws you ca...
SparkFun XBee Shield
XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using...
WRTnode Standard Shield
This standard sheild for WRTnode is directly stackable with the WRTnode Mini OpenWRT Dev Board. WRTnode (A Mini OpenWRT Dev Board) uses a MTK MT7620N 580MHZ MIPS CPU, and is powerful in both interface and functionality. But expanding its interface with jumper wires is troublesome si...
Arduino and Breadboard Holder
The Arduino and Breadboard Holder is a sturdy plastic base plate that keeps your Arduino and breadboard neatly organised during prototyping. The board mounts with two included screws using the standard Arduino mounting holes, giving a solid and simple connection — no plastic clips required. Comp...
Neutis Development Kit
The Neutis Development Kit from Emlid is a quad-core system-on-module (SoM) development platform based on the Neutis N5 module. It runs a Yocto-based Linux BSP with an up-to-date kernel, powered by a 64-bit ARM Cortex-A53 CPU and ARM Mali450 MP2 GPU. The development board provides easy access to...
WiFi Module - ESP8266 (4MB Flash)
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all WiFi networking functions from another application processor. Each ESP8...
ESP32-S3-DevKitC-1-N8R8 - ESP32-S3-WROOM-1
·
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM. ...
nRF52840 USB Key with TinyUF2 Bootloader - Bluetooth Low Energy
·
This USB dongle/key type thing is a little unusual - it isn't a BLE adapter that you plug into a computer to add wireless capability. (If you do want something like that, our Bluetooth 4.0 USB Module will do the job nicely.) Instead, this is basically a minimal nRF52840 wireless microcontrol...
PiTray Clip Din Rail Mount (Compatible for Raspberry Pi and NVIDIA Jetson Nano)
PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail installation solution suitable for industrial setup, home automation application a...
ESP32-S3-DevKitC-1 - ESP32-S3-WROOM-2
·
The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-2 (PCB antenna) with 32MB Flash and 8MB PSRAM.&n...
Shrouded Servo to Premium Male Jumper Wires Cable - 17cm long
·
Stretch out your servo connections with this flexible servo to premium male header jumper cable. It has a 3-pin shrouded "male" connector to plug the servo into and then, 17cm later, three separated jumper wire ends that plug into a breadboard or some header.It's excellent for when you want ...
ESP32-C6-DevKitC-1-N8 - 8MB SPI Flash
The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions....
Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic
The Adafruit ATtiny1616 Breakout with seesaw is a versatile development board that combines an ATtiny1616 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. It works as both a standalone dev board and an I2C peripheral that adds GPIO, ADC, PWM, and NeoPixel support...
Adafruit Audio BFF Add-on for QT Py and Xiao
The Adafruit Audio BFF is a compact add-on board that turns your QT Py or Xiao into a powerful audio playback device. It features a microSD card slot (up to 64 GB) and a MAX98357 I2S 3W amplifier, all designed to fit neatly on the back of your miniature dev board. The board connects over the SPI...
ESP32-S3 1.75inch AMOLED Round Touch Display Development Board - with Case
Build compact connected projects around a bright round touchscreen with this Waveshare ESP32-S3 development board. It pairs an ESP32-S3R8 processor with a 1.75-inch AMOLED touch display, making it a strong starting point for wearables, IoT dashboards and small human-machine interfaces.The board b...
LANA TNY CH32V203 Mini Microcontroller Board by Phyx
·
The LANA TNY is a compact development board from Phyx, built around the WCH CH32V203 RISC-V microcontroller. It follows the bite-sized style of boards like the Adafruit QT Py and Seeed Studio XIAO, while adding SMD pins for optional extra IO and a built-in WS2811-compatible LED output.The CH32V20...
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
·
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...
Thing Plus ESP32-WROOM (Micro-B)
·
Built around Espressif's ESP32-WROOM module, this Feather-compatible development board is a handy starting point for WiFi, Bluetooth and battery-powered IoT projects. The dual-core Xtensa 32-bit LX6 processor runs at up to 240MHz, with 16MB of embedded flash and 520KB of internal SRAM on hand for...
ItsyBitsy ESP32 PCB Antenna - 8MB Flash / 2MB PSRAM
·
This compact wireless development board gives you a full-featured ESP32 platform in the familiar ItsyBitsy format. It uses the ESP32 PICO ECO V3 in an FCC-certified ESP32 Pico module, combining a dual-core 240MHz processor with 2.4GHz Wi-Fi, Bluetooth® Classic and BLE, plus 8 MB of Flash and 2 MB...
