All Products

SKU: AF-5635 · MPN: ADA5635

When an SD card is overkill, this small board gives your microcontroller project a handy chunk of non-volatile storage for files, images, fonts, audio clips and other data. It uses a W25Q16 flash chip, providing 16 Mbit / 2 MByte of external memory with lower cost and power usage than a full SD c...

SKU: AF-5840 · MPN: ADA5840

This breakout makes it much easier to work with the OV5640 image sensor on capable microcontroller platforms. It combines a 5 Megapixel OV5640 camera with a 72-degree non-distorting lens, autofocus motor, and the support circuitry needed to bring the module out to a practical board.It is designed...

SKU: AF-6359 · MPN: ADA6359

This breakout lets you add an ideal diode to a higher-current DC power path without the usual forward voltage drop of a standard diode. It is designed for 3~23V DC supplies and up to 5A, using the LM73100's back-to-back FETs to keep current flowing in one direction while wasting far less power as...

SKU: AF-6482 · MPN: ADA6482

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, including thermostats, cold chain asset tracking, and gas or heat metering, and it can a...

SKU: AF-6388 · MPN: ADA6388

This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics designs, and it can be paired with a 6-DoF accelerometer/gyroscope to help build ...

SKU: AF-5839 · MPN: ADA5839

This breakout makes it much easier to add a higher-resolution camera to capable microcontroller projects. It uses the OV5640 image sensor with a 5 Megapixel sensor element and a 120-degree wide-angle lens designed for minimal fish-eye distortion, making it a good fit for machine vision, snapshot ...

SKU: AF-5633 · MPN: ADA5633

This breakout makes it much easier to prototype with external QSPI flash memory on modern microcontrollers such as the RP2040, ESP32, RT10xx and STM32 families. It adapts a wide 8-SOIC flash package to a neat 0.3" wide DIP format, so you can plug it into a breadboard, try different flash sizes, o...

SKU: AF-5632 · MPN: ADA5632

This breakout makes it much easier to prototype with external QSPI flash on modern microcontroller platforms such as RP2040, ESP32, RT10xx and STM32 designs. It converts a wide 8-SOIC flash package into a breadboard-friendly 0.3" wide DIP format, which is handy when you want to test different fla...

SKU: AF-6498 · MPN: ADA6498

Measure ambient light in real lux with a sensor that handles everything from very dim conditions to bright outdoor sunlight. This breakout is built around the MAX44009, an easy-to-use ambient light sensor that automatically ranges across a very wide span, so you can get smooth readings without co...

SKU: AF-5832 · MPN: ADA5832

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...

SKU: AF-5810 · MPN: ADA5810

This breakout combines Vishay's VCNL4020 proximity sensor and ambient light sensor on one compact I2C board, making it a handy choice when you want to detect nearby objects and measure light levels at the same time. The proximity sensor works from 0 to 200mm (about 7.5 inches), while the light se...

SKU: AF-5858 · MPN: ADA5858

Add USB host capability to a Feather-based project, so your microcontroller can talk to devices like keyboards, mice and USB mass storage drives. This board is built around the MAX3421E, a well-proven USB host controller that communicates with the main Feather over SPI plus an IRQ pin.It is a han...

SKU: AF-2328

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence-of-vision (POV) projects and smooth, flicker-free animations — especially at lo...

SKU: AF-3527

The Adafruit PiOLED is a compact 128×32 monochrome OLED display that plugs directly onto your Raspberry Pi's GPIO header. At just 1 inch diagonal, it's the perfect status display for headless Pi projects — showing IP addresses, system stats, sensor readings, or custom graphics without needing a f...

SKU: AF-5580

The Adafruit MAX17048 LiPoly/LiIon Fuel Gauge and Battery Monitor gives you accurate battery voltage and charge percentage readings for your 1S 3.7–4.2V lithium polymer or lithium ion battery. Instead of guessing remaining capacity from a non-linear voltage curve, this smart sensor does the maths...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-3386

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux kernel support, it's ideal for data logging, time-stamping, alarms, and any pro...

SKU: AF-3253

The Adafruit Raspberry Pi Camera Board Case is a compact two-piece polycarbonate enclosure that protects your Pi Camera while providing a 1/4" tripod mount on the back. Designed by Mike Doell, it snaps together without screws and features a sleek black base with a clear top. The case includes a ...

SKU: AF-4698

The Adafruit AS7341 is a 10-channel multi-spectral light sensor that detects not just the amount of light present, but the specific wavelengths — giving you far more detailed colour information than a simple RGB sensor. It measures 8 overlapping visible light bands, plus white light and near-infr...

SKU: AF-4712

The Adafruit LC709203F Fuel Gauge monitors your single-cell LiPo or Li-Ion battery and reports both voltage and state of charge as a percentage over I2C. It handles the non-linear voltage-to-percentage conversion for you, so your project always knows exactly how much battery is left — just like t...