All Products

SKU: AF-583

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Blue. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargea...

SKU: AF-584

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Green. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharge...

SKU: AF-586

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Orange. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharg...

SKU: AF-588

A starter pack containing 2.5 metres of high-brightness pink EL (electroluminescent) wire with a pocket inverter and soldering supplies. The EL wire comes pre-cut and soldered, ready to connect to the included battery-powered inverter for an instant neon-like glow. Key Features 2.5 m Pink EL W...

SKU: AF-587

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in Red. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeab...

SKU: AF-546

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in White. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or rechargeabl...

SKU: AF-585

A little bundle to get you started! This project pack contains: 2.5 meters (over 8 ft) of high-brightness, long-life EL wire in yellow. 2.5 meters is the maximum amount for the pocket driver - it is cut and soldered so it's ready to go! Pocket EL inverter runs on 2 AA Alkaline or recharg...

SKU: LB-LR0281-5-W

This 5m length of EL wire (electroluminescent wire) is a flexible wire coated with phosphor which glows blue when applied with the appropriate voltage. Whilst EL wire looks similar to a thin neon tube, the wire is in fact flexible and cold to the touch when running. EL wire is great for creati...

SKU: LB-LR0281-5-Y

A 5-metre length of yellow electroluminescent (EL) wire with a battery-powered inverter included. EL wire is a flexible, phosphor-coated wire that produces a bright, even glow — similar in appearance to a thin neon tube but fully flexible and cool to the touch while running. The included inverte...

SKU: WS-21706

EM06-E LTE Cat-6 HAT for Raspberry Pi, dual antennas LTE-A, multi regions multi band, GNSSEM06-E LTE Cat-6 HAT for Raspberry PiSupports LTE-A and UMTS/HSPA(+) multi networksmulti-constellation high-accuracy GNSS, cloud platform communication, LTE-A networkingFeatures at a glanceThis is an LTE Cat...

SKU: LB-EMAX

Description:Type: Emax ES08MA IISize: 23 x 11.5 x 24 mm (1.25 x.45 x.94in)Weight: 12g / 0.42ozWorking voltage: 4.8V~6.0VWorking current: 200mA/60°Speed: 0.12sec/60o at 4.8V; 0.10sec/60o at 6VTorque: 1.6/2.0 kg.cm (4.8V/6v)Materials: Metal GearThe line length: 25 cmStandard: Futaba/JR universa...

SKU: ET-230108601

(dump)

SKU: DF-DFR0963

This is an embedded serial-to-Ethernet module based on the ESP32 series, also can be called a gateway. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time costs.&nbs...

SKU: DF-DFR0503-EN

The embedded thermal printer uses thermal technology, it doesn't need to add toner or ink, stable performance and mini size. The embedded thermal printers are widely used in instrumentation, food inspection, shopping terminals and other scenarios. It can be found in the ATM machines, lockers, POS...

SKU: JU-W-LP256

A colourful, gold-backed hard enamel lapel pin from Jubly-Umph featuring an "Embrace the Chaos" design. A celebration of the beautifully busy life — wear it with pride. Beautifully presented on a Jubly-Umph backing card. Limited edition. Details Material – Hard enamel with gold backing Heigh...

SKU: DF-FIT0156

A 40 mm red mushroom-head emergency stop push button switch. This momentary-action button fits a standard 22 mm mounting hole and is rated for up to 660V insulation voltage and 10 A thermal current — suitable for both project builds and industrial-style control panels. Specifications Model – Y...

SKU: EC-DPM43149E

The MSP-FET430UIF is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can...

SKU: PI-RPI-013

Looking for a slightly more discreet way to show your appreciation for all things Pi?This enamel badge, just 30mm from bottom to top, is an excellent addition to any outift. With a beautiful gloss finish over the stylish Raspberry Pi logo you can show your support for the Foundation while also lo...

SKU: AF-3522

For winding custom coils, or very fine-pitch rework, we always reach for magnet wire. Magnet wire is very very thin (0.1mm diameter!) copper wire with a very thin layer of insulation. It's used for a range of electronics, hacking and making applications. Commonly these are used for winding tra...

SKU: EC-SIN16080E

The ENC28J60 Ethernet Module utilizes the new Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of the network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 2...