Little Bird
Electronic Components Basic Starter Kit
$28.80
|
In stock
This comprehensive electronic components kit is ideal for students, hobbyists, and makers working on Arduino, Raspberry Pi, breadboard, and general DIY elect...
Get notified when back in stock
Estimated Delivery
Arrives
Order within 2h 16m for same-day dispatch
Disclaimer
Secure checkout
This comprehensive electronic components kit is ideal for students, hobbyists, and makers working on Arduino, Raspberry Pi, breadboard, and general DIY electronics projects. It includes a wide selection of commonly used LEDs, resistors, capacitors, diodes, and transistors, neatly packaged for easy access and organization.
LED Diodes (100PCS)
- 5 colours: Red, Green, Blue, Yellow, White
- 20 pieces per colour
Resistors (600PCS, 1/4W)
- 30 resistance values ranging from 10Ω to 1MΩ
- Approx. 20 pieces per value
Electrolytic Capacitors (120PCS)
- 12 values from 0.22µF to 470µF
- Voltage ratings: 16V and 50V
- 10 pieces per value
Ceramic Capacitors (300PCS)
- 30 commonly used values from 2pF to 100nF
- 10 pieces per value
Diodes (100PCS)
- Includes popular models such as:
1N4148, 1N4007, 1N5819, 1N5399, FR107, FR207, 1N5408, 1N5822
Transistors (170PCS)
- 17 commonly used transistor types including:
S9012, S9013, S9014, S9015, S9018, A1015, C1815, 2N3904, 2N3906, 2N5401, 2N5551, and more - 10 pieces per type
Package Includes
- 100 × LED Diodes
- 600 × Resistors
- 120 × Electrolytic Capacitors
- 300 × Ceramic Capacitors
- 100 × Diodes
- 170 × Transistors
A great all-in-one component assortment for prototyping, repairs, learning electronics fundamentals, and building a wide range of projects.
Jargon buster
Plain-language definitions for the technical terms used above.
- 1N4007
- A common general-purpose rectifier diode rated for relatively high reverse voltage. It is often used in power supplies and protection circuits where speed is not critical.
- 1N4148
- A common small-signal switching diode used for low-current electronic signals. It is a good choice for fast signal switching or simple protection tasks, but not for carrying large power currents.
- 1N5399
- A rectifier diode with a higher current rating than small signal diodes and a high reverse-voltage rating. It is suited to general power rectification where the circuit current is above what smaller rectifier diodes can handle.
- 1N5408 diode
- A general-purpose silicon rectifier diode rated for relatively high current (commonly 3 A) and high reverse voltage (commonly 1000 V). It matters when choosing a power-supply or protection diode because its current, voltage rating, package size, and forward voltage drop must suit the circuit.
- 1N5819
- A common Schottky diode with a low voltage drop and modest current rating. It is useful in low-voltage circuits where saving voltage and reducing heat are important.
- 1N5822 diode
- A Schottky rectifier diode rated for relatively high current (commonly 3 A) and low forward voltage drop. It is often used in power supplies, reverse-polarity protection, and solar or battery circuits where lower voltage loss and less heat matter than with a standard silicon diode.
- FR107 diode
- A fast-recovery rectifier diode commonly rated for about 1 A forward current and 1000 V reverse voltage. It is used to convert or block current in circuits where ordinary rectifier diodes may switch too slowly, such as power supplies, relay flyback paths, and higher-frequency switching circuits.
- FR207 diode
- A 2 A, 1000 V fast-recovery rectifier diode commonly used to let current flow one way while blocking it the other way. Its fast recovery matters in switching power supplies and other circuits where a standard rectifier diode may switch off too slowly and waste power or cause noise.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
