All Products
Showing 21-35 of 35 products
Seeed Studio XIAO ESP32C3
The Seeed Studio XIAO ESP32C3 is a compact microcontroller board built around the ESP32-C3 RISC-V SoC. It features complete Wi-Fi and Bluetooth 5.0/BLE connectivity in the signature XIAO thumb-sized form factor (21 × 17.8 mm), making it well suited for IoT, wearables, and low-power wireless proje...
I2CMini by Excamera Labs
·
I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector! USB to I²C interface in a tiny 18x18mm board Can a...
Matrix Portal S3 for HUB75 RGB Matrices - u.FL
·
Make an internet-connected RGB matrix display without the usual wiring fuss. This board plugs straight into the back of a compatible HUB75 RGB matrix, giving you an easy way to build colourful signs, clocks, status panels and data dashboards with CircuitPython or Arduino.This version uses a u.FL ...
FeatherS2 Neo - Blingy RGB ESP32-S2 Feather Development Board
·
Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive ...
Qwiic Cable - Grove Adapter (150mm)
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and ...
Adafruit NeoTrellis RGB Driver PCB for 4x4 Keypad
·
Upgrade your button-pad projects with full-colour NeoPixel backlighting. The NeoTrellis RGB Driver PCB is a 4×4 keypad controller with 16 NeoPixels and an onboard seesaw I2C chip that handles both button scanning and LED driving — all over plain I2C, no NeoPixel pin management required. The boar...
Calliope Mini Development Board
Willkommen, Calliope Mini! Developed in Germany for students in primary school and up, this heavenly star-shaped development board is a souped-up derivative of the micro: bit.The main chip on the Calliope is the same nRF51822 as the micro: bit so for many purposes, it can be programmed the s...
Grove Vision AI v2 Kit - with Raspberry Pi OV5647 Camera Module and Seeed Studio XIAO
A high-performance, MCU-based smart vision module powered by the Himax WiseEye2 HX6538 processor, featuring a dual-core Arm Cortex-M55 with an integrated Arm Ethos-U55 neural processing unit. With Arm Helium technology optimised for vector data processing, it delivers strong ML and DSP performanc...
Adafruit MCP4728 Quad DAC with EEPROM - STEMMA QT / Qwiic
·
The Adafruit MCP4728 Quad DAC with EEPROM provides four independent 12-bit digital-to-analogue converters in a single I2C package. Set precise output voltages for your project, and save your settings to the built-in EEPROM so they're automatically restored on power-up. Each channel supports two ...
Maker Pi RP2040 - Motor and Robot Controller
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chi...
I2C to 8-Channel Solenoid Driver
·
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
Grove-T Connector (5pcs)
Description Grove-T is a T-shaped hub. Is this remind you the HUB unit ? They are basically the same thing, just in different shape.This is also used for GROVE port expanding. Notice: Grove-T is just a hardware expander, if you are looking for hardware and software(standard prot...
M5StickC+ Development Kit with Hat
The M5StickC is a compact ESP32-based development board from M5Stack, designed for portable IoT prototyping. Despite its tiny size, it packs a 0.96-inch LCD, 6-axis IMU (MPU6886), microphone, IR transmitter, red LED, and an 80 mAh LiPo battery — all accessible via USB Type-C. This kit includes t...
Flexible Qwiic to STEMMA Cable - 500mm
With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to STEMMA Adapter Cable allows interoperability between the SparkFun Qwiic Connect System and...
JST PH 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm
·
This cable will let you turn a JST PH 4-pin cable port into 3 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA bre...
