All Products
Showing 21-40 of 100 products
2x3A DC Motor Driver Carrier Board for UNIHIKER M10
·
This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver with separate motor power, plus onboard RGB LEDs and infrared transmitter/receiver....
Type-C USB Power Meter Tester
Type-C USB Power Meter Tester – Color Display, PD 3.1, QC 3.0, Fast Charge Protocols Need to know exactly what's going on between your USB-C power source and your device? The Type-C USB Power Meter Tester has you covered. Whether you're debugging a fast-charging setup, validating USB-C PD profil...
Gravity: Arduino Analog Flame Sensor
This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefighting robots, fire alarm projects, and other safety applications. The Gravity i...
Gravity: Digital Capacitive Touch Sensor For Arduino
A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...
Gravity: Arduino Digital Water Flow Sensor - 1/8
The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows through the sensor, a magnetic rotor w...
Gravity: Water Flow Sensor (1/2) For Arduino
INTRODUCTION The Gravity Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows throug...
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration data via a serial interface — ideal for building air quality monitors, weather s...
Gravity: Digital Push Button (Red)
Press to release pleasure! Our redesigned digital push buttons come with LED, immersion gold surface, and bright colored hats. A captital D at left corner indicates that it is a digital sensor. An illustration of button painted in the back notifying its function. Pressing it is a real fun, esp...
Gravity:Terminal Sensor Adapter V2.0
This is universal sensor adapter V2.0, it can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination.Improvment compare with the old version,we add a 10K resistor between A & B, A & C respectively,so that you needn't to conne...
Gravity: Steam Sensor
This is a steam(water)sensor from DFRobot. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up. Notice:The new version of analog sensor port pin mapping has been changed as the foll...
Gravity: Analog Water Pressure Sensor
The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it connects directly to Arduino and other 5 V microcontrollers for easy integration i...
Gravity: Digital 360° Tilt Sensor for Arduino
This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With digital input, this sensor can be used with an Arduino expansion board to reali...
Gravity: 3 Pin PH2.0 to DuPont Male Connector Digital Cable Pack (30cm)
Note: One package has 10 cables.This high-quality 30cm digital sensor cable is equipped with 3 pin PH2.0 plug connector on one side and Dupont male connector on the other side. One package has 10 cables. Compatible with breadboard and DuPont wire spacing, these cables use materials that are ...
Gravity: Liquid Flow Sensor (G1/2)
This Gravity: Liquid Flow Sensor is designed based on the electromagnetic principle. It adopts O-ring rubber seal and uses silicone sealant at the outlet end to ensure good waterproofness. Also, it embraces high anti-electromagnetic interference and anti-vibration capabilities, offering reliable ...
Gravity:Digital Self-Locking Switch
INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and is compatible with the "gravity" 3-pin interface making it easy to connect to a...
DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280)
·
This compact Gravity module combines a Bosch BNO055 absolute orientation sensor with a BMP280 barometric pressure and temperature sensor to create a 10DOF AHRS module for motion, heading and environmental sensing.The BNO055 integrates a triaxial 14-bit accelerometer, triaxial 16-bit gyroscope, tr...
Gravity 3-Pin PH2.0 to DuPont Male Cable Pack 30cm
·
This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making them handy for connecting DFRobot analogue sensors to an IO Expansion Shield or IO...
Gravity BMP581 Barometric Pressure & Temperature Sensor - I2C/UART
·
This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude hold, indoor navigation, weather logging and hiking altimeters.The board support...
Gravity BMP585 Barometric Pressure & Temperature Sensor (I2C/UART)
·
Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help it resist water, moisture and chemical exposure, making it better suited to dem...
_830x554.jpg.webp)
Gravity 8x8 Matrix ToF Distance Sensor - I2C/UART
·
This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interactive project a much better sense of what is in front of it.Onboard firmware runs o...
