All Products

SKU: EF-EF04100

Octopus MG811 CO2 Gas Sensor is a CO2 electronic brick in our OCTOPUS series, the basic design for the outlook, PCB fixing holes and connections are the same with them.The higher the CO2 concentration is, the lower the output voltage would be. The users can read the CO2 value easily after checkin...

SKU: LB-LR0293-11

A 40-pin ribbon of female-to-female (F/F) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ female header contacts o...

SKU: AF-3985 · MPN: 3985

This T-Slot Photo Interrupter with Cable is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light across the gap, to the detector on the other side. This makes it perfect ...

SKU: AF-2223 · MPN: 2223

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra long 10mm pins, compared with our p...

SKU: SF-PRT-09279

This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: SF-PRT-09280

This is a 6-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet

SKU: AF-5031 · MPN: 5031

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable. Our latest addition to the collection is this 1 meter l...

SKU: AF-5652

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable.Our latest addition to the collection is this 1-meter-long Bl...

SKU: AF-1992 · MPN: 1992

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is ...

SKU: AF-1658 · MPN: 1658

Connect your own PCB to a Raspberry Pi with this extra-tall female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is the same base...

SKU: LB-MAKERCASE

Keep your favourite maker gear together and protected when you’re heading to an event, work or school. This compact zip case is sized for small electronics essentials, helping stop them from disappearing into the bottom of a backpack.It’s a handy fit for a microcontroller or single-board computer...

SKU: PR-PIM191

Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...

SKU: PR-PIM295

Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...

SKU: PR-PIM294

Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...

SKU: AF-284 · MPN: 284

Note: These use genuine FTDI chips, either we purchase them or they are manufactured to our specifications with the requirement of genuine FTDI chips 10/22/14 - read more. Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just wan...

SKU: SF-COM-11706

Do you fear that your power may not be “far reaching” enough? How would another 3' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 3' of power cable is exactly what your project needs. Don’t hack apart a nice clean barrel jack connection just because it won’t reach, ...

SKU: SF-COM-11707

Do you fear that your power may not be “far reaching” enough? How would another 6' work for you? Okay, so it doesn’t sound very dramatic, but sometimes an extra 6' of power cable is exactly what your project needs. Don’t hack apart a nice clean barrel jack connection just because it won’t reach, ...

SKU: DF-DFR0258

This RS232 Shield For Arduino is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The RS232 shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 shield headers will facilitate your co...

SKU: AF-3986 · MPN: 3986

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light across the gap, to the detector on the other side. This makes it perfect for detecti...

SKU: PI-CAB0305

This 200 cm flex cable is a replacement or extension cable for the Raspberry Pi Camera Module. The extra length gives you much more flexibility in positioning your camera away from the Pi — ideal for enclosures, 3D printer monitoring, security setups, or any project where the standard 15 cm cable...