All Products

SKU: AF-3422 · MPN: 3422

The Adafruit Arcade Bonnet makes it easy to build retro gaming projects with a Raspberry Pi. It's sized to match the Pi Zero for compact builds, but works with any Pi that has a 2×20 header (Pi Zero, Pi 2, Pi 3, Pi B+, etc.). The bonnet manages all buttons and switches through an I2C GPIO expand...

SKU: DF-DFR0287

A 128×64 pixel LCD shield with LED backlight that plugs directly into Arduino boards. Supports English, Chinese, and bitmap image display. Includes a built-in 5-direction joystick for menu navigation and interactive control, plus breakout pins for additional I/O. Key Features 128×64 LCD Displa...

SKU: PI-A000095

The Arduino Esplora is a microcontroller board derived from the Arduino Leonardo, designed for people who want to get up and running with Arduino without learning about electronics first. It comes with a collection of built-in sensors and outputs ready to use straight out of the box — no wiring o...

SKU: DF-DFR0126

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven frequencies measured are as follows: 63Hz, 160Hz, 400Hz, 1kHz, 2.5kHz, 6.25kHz a...

SKU: DF-SEN0043

An analog ambient light sensor based on the TEMT6000 detector, which has a spectral response closely matching the human eye with very low IR sensitivity. It outputs an analog voltage proportional to the ambient light level, making it easy to read with any Arduino or microcontroller analog input. ...

SKU: DF-DFR1037 · MPN: DFR1037

##Introduction This is a 2-channel analog voltage output DAC module with PWM communication, 8-bit resolution, and 0.5% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outpu...

SKU: DF-DFR0055

This is universal sensor adapter V2.0, it can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination.Improvment compare with the old version,we add a 10K resistor between A & B, A & C respectively,so that you needn't to conne...

SKU: LB-52PI-EP-0172

The Pico Breadboard Kit with a 3.5-inch touch screen, mini PSP joystick, RGB light, buzzer, and two buttons is a versatile electronics kit designed for prototyping and experimentation. This compact kit combines various components to create interactive projects and offers a user-friendly interf...

SKU: DF-DFR0853

The 8-Channel Isolated Analog Data Acquisition Module is an industrial-grade 12-bit ADC with RS485 communication, designed for reliable multi-channel voltage and current measurement in demanding environments. Each channel is independently configurable for different input ranges, and the module s...

SKU: DF-SEN0211

INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this problem. Using induction you can measure AC current without intrusive methods. Pl...

SKU: DF-DFR0051

The Analog Voltage Divider V2 can detect the supply voltage from 0.0245V to 25V. This module is based on resistor divider principle. The voltage detection module allows the input voltage to reduce 5 times. As the Arduino analog input voltage is normally maximum 5V, the input voltage of analog ...

SKU: DF-DFR0553

DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world.Raspberry Pi is a common master control board which is...

SKU: EC-SES90101S

The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it suitable for both domestic and industrial gas leak detection. The sensor operates...

SKU: DF-KIT0018

The DFRobot Gravity Intermediate Kit for Arduino takes you beyond the basics with a comprehensive set of sensors, modules, and an Arduino-compatible board. Starting with simple LED projects and progressing to more complex builds like a mini electronic drum kit, sound-activated LED, and digital di...

SKU: DF-TEL0067

The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for X...

SKU: LB-LR0030

A simple analog Hall effect sensor module for detecting magnetic fields with Arduino. When a magnet is detected, the on-board LED turns on and the analog output changes proportionally to the field strength — making it easy to detect both the presence and relative proximity of a magnet. Key Featu...

SKU: DF-SEN0198

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure temperatures greater than 100C you will need something with a greater temp...

SKU: AF-1918 · MPN: 1918

An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable voltage level, making it simple to connect to any microcontroller's analog input. ...

SKU: DF-DFR1034 · MPN: DFR1034

##Introduction This is a 2-channel analog voltage output DAC module with I2C communication, 12-bit resolution, and 0.1% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal outp...

SKU: DF-DFR1035 · MPN: DFR1035

##Introduction This is a 1-channel analog voltage output DAC module with I2C communication, 15-bit resolution, and 0.01% precision. It is well-suited for control projects operating within the 3.3V range, such as ESP32, Raspberry Pi, STM32, and other microcontrollers that require analog signal out...