All Products

SKU: TB-ZR1007

A 4-pack of 1N4007 general-purpose silicon rectifier diodes, the highest voltage rating in the 1N400x family. Rated for 1 A continuous forward current and 1000 V peak reverse voltage, making them suitable for a wide range of rectification and protection applications. Specifications Part Number...

SKU: AF-1641

A 10-pack of 1N4148 small signal diodes — one of the most commonly used switching diodes in electronics. Designed for fast switching and small signal rectification rather than power applications, with a reverse recovery time of just 4 ns. Key Features Fast Switching – 4 ns reverse recovery tim...

SKU: AF-5099

A bulk pack of 100 surface-mount 1N4148 signal diodes in SOD-123 package. These are the same fast-switching 1N4148 diodes used in through-hole projects, but in a compact SMT form factor — particularly popular for custom keyboard PCBs where each key switch needs its own diode. Key Features SOD-...

SKU: TB-RG5010

A 1 nF polyester (greencap) capacitor rated at 100 VDC. Polyester capacitors offer good stability and reliability across a wide range of applications, making them a versatile choice for general-purpose circuits, filtering, and timing. Specifications Capacitance: 1 nF Tolerance: ±10% Voltage ...

SKU: SS-110990032

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...

SKU: PI-1SHEELD

The 1Sheeld+ is a Bluetooth shield for Arduino that turns your smartphone into over 40 different Arduino shields. Connect your iPhone or Android device via the free 1Sheeld app, and use your phone's sensors, camera, GPS, social media, and more directly from your Arduino sketch. The shield acts a...

SKU: AF-518

An ultra-bright 1 W cool white LED pre-mounted on an aluminium PCB heatsink, making it easy to solder and integrate into projects. With 90 lumens output in a 140° lambertian pattern, it delivers bright, even illumination ideal for flashlights, headlamps, and general lighting. The LED produces a ...

SKU: LB-LR-DIGI-TEMP-1M-A

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header as shown — no breadboard, jumper wires, or additional components needed. This is the assembl...

SKU: LB-LR-DIGI-TEMP-3M-A

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the assembled versio...

SKU: LB-LR-DIGI-TEMP-1M-UA

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the unassembled vers...

SKU: LB-LR-DIGI-TEMP-3M-UA

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the unassembled vers...

SKU: EC-CCH01065C

A 1×6 female stackable header with extra-long pins, designed for stacking Arduino shields. The extended legs pass through one shield's PCB and connect into the board below, allowing multiple shields to be stacked on top of each other. Specifications Pins: 6 (1×6 single row) Type: Female stack...

SKU: TB-PH9203

A single AA battery holder moulded in Delrin with corrosion-resistant nickel-plated springs and studs. It comes with 150 mm bare lead connection wires for easy integration into your projects. Specifications Cell Type – AA Number of Cells – 1 Output Connection – Bare leads Cable Length – 150...

SKU: PL-1120

A 200:1 plastic gearmotor with a 90-degree output shaft, offering a compact and affordable solution for small robot designs. The low-current brushed DC motor is well-suited for use with common motor drivers, and the recommended operating voltage range is 3–12V. The gearbox is fully enclosed and ...

SKU: TB-RR0555

A pack of eight 200Ω metal film resistors rated at 0.5W with 1% tolerance. These through-hole axial resistors are the same physical size as standard 1/4W carbon film resistors, making them a drop-in upgrade with double the power rating. Specifications Resistance: 200Ω Power Rating: 0.5W Tole...

SKU: TB-TS1651

A complete soldering starter kit with everything a hobbyist needs to get started. The kit centres around a 240V turbo soldering iron with switchable 20W/130W power, along with a spare tip, solder, desoldering pump, and a basic stand. Key Features 20/130W Turbo Iron – Switchable power for delic...

SKU: AF-4311

A vibrant 2.0" IPS TFT display breakout with 320×240 resolution and full-colour output, driven by the ST7789 controller. The IPS panel delivers vivid colour reproduction and wide viewing angles — a significant upgrade over CSTN-type displays found in older LCD modules. The breakout communicates ...

SKU: DF-DFR0664

A 2.0" IPS TFT LCD display breakout with 320×240 resolution (RGB565), driven by the ST7789V controller. The wide 80° viewing angles in all directions ensure clear visibility, and the SPI interface makes it compatible with a broad range of microcontrollers including Arduino Uno, Leonardo, ESP32, E...

SKU: PL-3215

A high-power 12V brushed DC gearmotor with a 20.4:1 metal spur gearbox and integrated 48 CPR quadrature encoder. The encoder on the motor shaft provides 979.62 counts per revolution of the gearbox output shaft, enabling precise speed and position control for robotics applications. The cylindrica...

SKU: DF-FIT1013 · MPN: FIT1013

This expansion cable kit is made for connecting Gravity-style modules directly to the UNIHIKER M10 and UNIHIKER K10 mainboards. Its plug-and-play design helps you hook up sensors, actuators and displays without needing extra expansion shields.The kit includes two 20cm PH2.0-3P male-to-male cables...