All Products
Showing 1-20 of 71 products
Particle Mesh WiFi Bundle - Full Starter Kit
·
Woohoo, it's time for a Particle Mesh party! So why not cater for connectivity with the Particle Mesh Wi-Fi Bundle, a veritable smörgåsbord (yum!) to begin building mesh networking for your IoT project. Particle Mesh means you can create local networks that collect data, share messages, and co...
SEGGER J-Link EDU Mini JTAG/SWD Debugger
·
A compact EDU version of SEGGER’s J-Link debug probe, this little unit gives you direct JTAG/SWD access to Cortex-M based targets for programming and debugging ARM microcontrollers.Instead of relying on printf statements and LEDs, you can set breakpoints, inspect memory and registers on a live sy...
SEGGER J-Link BASE - JTAG/SWD Debugger
·
The SEGGER J-Link BASE is an industry-standard JTAG/SWD debugger and programmer for ARM-based microcontrollers. It connects via USB and provides hardware debugging, flash programming, and real-time memory access across a wide range of ARM cores — from Cortex-M0 to Cortex-A9. The J-Link is toolch...
ST-LINK V2 Emulator and Debugger
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addit...
Particle Photon
The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller running at 120 MHz, it offers serious processing power in a breadboard-friendly fo...
Particle Xenon IoT Development Kit
The Particle Xenon is a low-cost mesh-enabled development board. With the Nordic nRF52840 SoC you have all the power of an ARM Cortex M4 with OpenThread mesh networking, NFC, plenty of GPIOs, LiPo charging and more. The board is designed to act as a standalone endpoint or repeater in a Particl...
Particle Photon - WiFi development kit for IoT
The Particle Photon is a tiny Wi-Fi development board for prototyping Internet of Things products. Built around a Broadcom BCM43362 Wi-Fi chip (the same used in Nest Protect and LIFX) and a powerful STM32F205 120 MHz ARM Cortex M3 microcontroller, it connects your project to the Particle Cloud fo...
Particle Photon Kit
The Particle Photon Kit is a complete starter package for building Wi-Fi-connected IoT projects. It includes a Photon development board (with headers pre-installed), a mini breadboard, USB cable, and basic components to get started immediately. The Photon connects to the Particle Cloud, a free c...
Grove Shield FeatherWing for Particle Mesh and all Feathers
·
The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feathe...
Particle Argon IoT Development Board (Wi-Fi+Mesh+Bluetooth)
The Particle Argon is a powerful Wi-Fi enabled development board that combines mesh networking and Wi-Fi over the 2.4 GHz band. It can operate as a standalone Wi-Fi endpoint or as a Wi-Fi gateway for a Particle Mesh network. Built around the Nordic nRF52840 processor, the Argon delivers excellen...
MPLAB PICkit 4 In-Circuit Debugger
This is the PICkit 4, the official programmer from Microchip. The PICkit 4 allows debugging and programming of PIC®, dsPIC®, AVR, SAM and CEC flash microcontrollers and MPUs using the powerful graphical user interface of the MPLAB X Integrated Development Environment (IDE). The MPLAB PICkit 4 is ...
Emulator and Debugger for MSP430
The MSP-FET430UIF is a powerful flash emulation tool to quickly begin application development on the MSP430 MCU. It includes USB debugging interface used to program and debug the MSP430 in-system through the JTAG interface or the pin saving Spy Bi-Wire (2-wire JTAG) protocol. The flash memory can...
Sensirion Particle, VOC, Humidity, and Temperature Sensor - SEN55
·
The SEN55 environmental node is a straightforward, all-in-one sensor solution platform for the accurate measurement of various environmental parameters, such as particulate matter, volatile organic compounds (VOCs), oxidizing gases, such as nitrogen oxides (NOx), as well as humidity & temperature...
Particle, VOC, Humidity, and Temperature Sensor - SEN54
The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a strong lifetime under 24 h/day operation, and a compact form factor. The combin...
LANA TNY CH32V203 Mini Microcontroller Board by Phyx
·
The LANA TNY is a compact development board from Phyx, built around the WCH CH32V203 RISC-V microcontroller. It follows the bite-sized style of boards like the Adafruit QT Py and Seeed Studio XIAO, while adding SMD pins for optional extra IO and a built-in WS2811-compatible LED output.The CH32V20...
DFRobot SEN0658 9-in-1 Ultrasonic RS485 Weather Sensor
·
Bring multiple environmental measurements into one rugged field sensor for Arduino, IoT and monitoring projects. This 9-in-1 unit measures ultrasonic wind speed and direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise, PM2.5 and PM10.Ultrasonic wind sensing ...
Fermion BMV080 Fanless PM1/PM2.5/PM10 Air Quality Sensor
·
This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...
Indoor Air Quality Combo Sensor - SCD41/SEN55 (Qwiic)
·
Build a detailed indoor air monitor with this Qwiic combo board, pairing Sensirion’s SCD41 CO2 sensor with the SEN55 environmental sensor node. Together they measure CO2, volatile organic compounds (VOCs), particulate matter across PM1.0, PM2.5, PM4 and PM10, temperature and relative humidity.The...
LiPo Fuel Gauge - MAX17043
·
Keep an eye on your single-cell LiPo battery before your project suddenly runs out of power. This compact fuel gauge board sits in circuit with your battery and reports the relative state of charge using the MAX17043 fuel gauge IC.It combines a charge-estimation algorithm with direct A/D measurem...
USB 32-Bit Whacker - PIC32MX795 Development Board
The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard friendly and includes all of the external circuitry needed to get the PIC32 up and ru...