All Products

SKU: DF-FIT0265

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on n...

SKU: DF-FIT0964 · MPN: FIT0964

This official micro:bit-branded USB cable is a short, reliable lead for powering and programming BBC micro:bit development boards. It connects a standard USB-A port on a computer or hub to the Micro USB socket on compatible microcontroller boards.At 30 cm long, it is well suited to classroom desk...

SKU: AF-3258

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything development board.This Micro-B male/female extension...

SKU: DF-FIT0351-OE

Simple and practical design with bold and dazzling color, it's a collision of undertone and publicity, making yourself stand out and become a trendsetter. Gold plating crafts assure the quality and efficiency of data transmission. Enhanced endurance with full gold-plated interface, also making...

SKU: LB-LR0293-3

An 80 cm USB-A to Micro USB cable for data transfer and charging. Compatible with development boards such as the Arduino Leonardo, as well as Raspberry Pi, mobile devices, and other electronics that use a Micro USB connector. Specifications Connector A – USB Type-A (male) Connector B – Micro ...

SKU: LB-PT91063

This cable is prefect for connecting your Micro:bit to you computer using USB-C.  With USB-C becoming standard this is a very handy cable for connecting your Micro:bit, Shakeup or Pico directly to you computer without needing an adapter.Type C To Micro USB charge cord, the maximum current...

SKU: DF-FIT0479

This USB 2.0 cable has a USB to microUSB connection. The USB connector is double sided so it can be connected in either orientation and includes an etched LattePanda logo. Each connector has super antioxidant properties for stable performance and durability. The cable can handle current ...

SKU: DF-FIT0965 · MPN: FIT0965

##Introduction Official micro:bit-branded USB cables allow you to power and transfer data to your micro:bit development board. ##Features High quality construction with PVC cable sleeve and embossed logos.USB 2.0 data transfer rates up to 480 MB/sUSB A Plug to USB Micro B Plug ##Specification L...

SKU: WS-16595

This Raspberry Pi hub HAT provides more USB capability to your Pi, plus a RJ45 Ethernet port, which is great when you need a stable wired Ethernet connection. It can work with various versions of the Pi, and the size of the board is designed to perfectly fit the Zero / Zero W / Zero WH. Features...

SKU: AF-1904

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: AF-3438

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this little USB extension cable. You can plug it onto the end of any USB data/sync cable you have: mini-USB, micro-USB, Apple ...

SKU: PI-CAB0703

A 50 cm Flotilla cable (micro USB B to micro USB B) for connecting Flotilla modules to the Flotilla Dock. These high-spec cables are designed to handle the higher currents that Flotilla components can draw, with moulded connectors stamped with the Flotilla logo. Specifications Connector: Micro...

SKU: SF-CAB-14724

This is a USB 3.0 type A to Micro-B cable. If you’re unfamiliar, this isn’t your typical micro USB cable, boasting a data transfer rate of up to 5GB/s making it a “SuperSpeed” USB option. This connector type is less common than its other micro USB siblings, but can still be found in some phones a...

SKU: AF-4279

The Adafruit Ultimate GPS with USB brings plug-and-play GPS and GLONASS positioning to any computer, laptop, or embedded Linux device via a built-in CP2104 USB-to-Serial converter. Simply connect a Micro USB cable and start receiving location data at 9600 baud — no microcontroller required. Buil...

SKU: AF-4260

A round panel-mount adapter that provides a USB-C socket on the outside and a Micro USB socket on the inside. At approximately 30 mm in diameter, it fits a standard round drill hole — no custom oval or square cutouts needed. Simply drill, insert, and secure with the included plastic nut. Ideal f...

SKU: AF-1929

Build your own open-source 8×8 button grid controller with the Adafruit UNTZtrument kit. Designed by PaintYourDragon and based on the Adafruit Trellis platform, this DIY kit features 64 translucent silicone buttons with diffused white LEDs, housed in a custom laser-cut acrylic enclosure. Powered...

SKU: PI-A000057

The Arduino Leonardo is a microcontroller board based on the ATmega32U4. Unlike previous Arduino boards, the ATmega32U4 has built-in USB communication, allowing the Leonardo to appear as a mouse and keyboard to a connected computer — in addition to a virtual serial/COM port. With 20 digital I/O ...

SKU: DF-TEL0119

The USB/TTL Raspberry Pi GPS Tracker is a compact GPS location module built around the L80-39 chip. With 66 search channels and 22 simultaneous tracking channels, it delivers fast satellite acquisition and reliable positioning accuracy down to 2.5m. Featuring both USB and TTL interfaces, this mo...

SKU: EL-CRB0000MK

Description "Inventor Kit" is the primary robot programming kit of the Crowbits series. It uses Micro:bit as the mainboard console, and combines with magnetic electronic modules as well as Lets code, a visual graphics programming software. Through simple drag-and-drop programming, kids can create...

SKU: SF-DEV-17287

The BBC micro:bit v2.21 is your gateway to hands-on learning, creativity, and innovation with digital technology. This pocket-sized powerhouse packs impressive features into a board that’s half the size of a credit card. Whether you’re crafting robots, designing musical instruments, or inventing ...