All Products
Showing 1-20 of 27 products
Arduino Portenta H7 Lite Connected Development Board
·
##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU chip and Cortex-M7/Cortex-M4 core as Arduino Portenta H7, enabling complex multi...
mbed Shield
The mbed Shield is an application board designed for the mbed LPC1768 prototyping platform. It brings together CAN, Ethernet, USB, and four standard Grove connectors on a single board, making it easy to connect sensors, actuators, and communication interfaces to your mbed projects. With a standa...
mbed Application Board
·
Turbo-charge your mbed LPC1769 dev board with this compact but feature-full application board. Fully assembled, just plug in your mbed and you will be ready to rock.Featuring: 128x32 Graphics LCD 5 way joystick 2 x Potentiometers 3.5mm Audio jack (Analog Out) Speaker, PWM Conencted 3 Axis +/1...
Arduino Portenta H7 Lite Development Board
The Arduino Portenta H7 Lite is a high-performance dual-core development board and the cost-optimised entry point in the Portenta H7 series. It uses the same STM32H747XI MCU as the full Portenta H7, featuring a Cortex-M7 core (up to 480MHz) and a Cortex-M4 core for parallel multi-threaded process...
BLE Nano
The BLE Nano is the smallest Bluetooth 4.0 Low Energy development board available, measuring just 18.5 × 21.0 mm. Built around the Nordic nRF51822 SoC (ARM Cortex-M0 + BLE), it runs at 16 MHz with ultra-low power consumption and supports both BLE Central and Peripheral roles. The included MK20 U...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
Temperature Sensor - Waterproof (DS18B20)
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a centra...
SparkFun RJ45 MagJack Breakout
This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The SparkFun RJ45 MagJack Breakout is the same one found in our very own mbed Starter Kit and breaks out each pin from the ethernet jack. This rev of the br...
SparkFun microSD Transflash Breakout
Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD card, this tiny form factor was created for cell phone storage and is perfect for your next MP3 project! Board comes fully assembled and tested. The bare socket...
NeoPixel Jewel - 7 x 5050 RGBW LED w/ Integrated Drivers - Warm White - ~3000K
·
Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Warm White RGBW version. We also have this jewel in Natural White, Cool White, and good ole RGB! The NeoPixel is...
NeoPixel Jewel - 7 x 5050 RGBW LED w/ Integrated Drivers - Natural White - ~4500K
·
Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Natural White RGBW version. We also have this jewel in Warm White, Cool White, and good ole RGB! The NeoPixel is...
NeoPixel Jewel - 7 x 5050 RGBW LED w/ Integrated Drivers - Cool White - ~6000K
·
Be the belle of the ball with the NeoPixel Jewel! These NeoPixel Jewels now have 4 LEDs in them (red, green, blue, and white) for excellent lighting effects. This is the Cool White RGBW version. We also have this jewel in Natural White, Warm White, and good ole RGB! The NeoPixel i...
micro:bit Club 10-Pack
·
The British Invasion is here! No, not music... microcontrollers! The BBC micro:bit is one of the newest and easiest ways to learn programming and electronics.Designed specifically for kids and beginners, the micro:bit is a pocket-sized computer that you can code, customize and control to bring yo...
NeoPixel Jewel - 7 x 5050 RGB LED with Integrated Drivers
·
Be the belle of the ball with the NeoPixel Jewel! We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful, round PCB with mounting holes and a chainable design to create what we think is our most elegant (and evening-wear appropriate) NeoPixel board yet.Use only ...
Addressable Through-Hole 5mm RGB LED with Diffused Lens, WS2811 Driver (10-Pack)
A pack of 10 addressable RGB LEDs in a familiar 5mm through-hole form factor. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just one microcontroller pin. Chain them together for stunning lighting effects. Unlike standard LEDs, t...
Basic 16x2 Character LCD - Black on Green 5V
This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen. Includes LED backlight. Dime...
RFID Reader ID-12LA (125 kHz)
RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the on...
NeoPixel Mini 3535 RGB LEDs w/ Integrated Driver Chip - Black [Pack of 10]
·
Itsy Bitsy Teenie Weenie Mini NeoPixel RGB LEDinis! Make your own smart LED arrangement with the same integrated LED that is used in our NeoPixel strip and pixels. These MINI (3.5mm x 3.5mm) RGB LEDs are fairly easy to solder and are half the size of the standard 5x5mm Neo...
Basic 16x2 Character LCD - Black on Green 3.3V
A classic 16×2 character LCD running at 3.3V, with a yellow LED backlight and black characters on a green background. Uses the industry-standard ST7066/HD44780 parallel interface — library support is available for virtually every microcontroller platform, making it straightforward to integrate in...
Servo - Generic (Sub-Micro Size)
Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-in. of maximum torque at 0.10 sec/60° This small servo comes with a standard 3 ...