All Products
Showing 1-20 of 35 products
Mako - 64 Bit Driver Kit
The ultimate high-performance bit kitThe complete screw-turning solution for precision repair jobs. Custom handle with two-zone grip profile provides up to 8.5 N-m of torque. Textured precision zone for delicate screw turning Three-faceted, large-diameter grip zone for heavy duty wrenching. 64 pu...
Manta Driver Kit - 112 Bit Driver Kit
The Manta Driver Kit includes iFixit's 1/4" Drive and 4 mm Drive premium aluminum screwdriver handles with magnetic bit sockets, knurled grips, and swivel tops—plus 112 precision driver bits.This kit includes our widest assortment of bits, complete with every driver head you’ll need to tackle any...
iFixit Mako 64-Bit Precision Driver Kit
·
The Mako Driver Kit is a compact precision screwdriver set designed for electronics repair, small appliances and the awkward fasteners found in modern gadgets. It includes iFixit's 4 mm aluminium screwdriver handle with a magnetic bit socket, knurled grip and swivel top, plus a flexible extension...
Mote - Host
Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...
Mote - Stick - Alternating White RGB
Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...
Mote - Stick - Bright White
Mote is the most stylish way to light your home (or ship)! Ideal for under-shelf or under-cabinet lighting, or even lighting the way to the emergency exits on your super-yacht (you have one right?) Mote consists of a USB controller, with four channels, that connects via a U...
pHAT BEAT
The ultimate audio add-on for your Pi! pHAT BEAT gives you high-quality, digital, amplified, stereo audio and 16 beautiful little RGB LEDs, in two rows of 8, that are ideal as a VU meter, and 6 buttons to control your audio. We've taken the I2S mono DAC and amplifier that we used on Speaker pH...
13.56MHz RFID/NFC Sticker - NTAG203 Tag
·
This blank 13.56 MHz RFID/NFC sticker contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The thin adhesive-backed form factor (4 × 2.5 cm) makes it easy to apply to equipment, packaging, shelves, or any smooth surface. The embedded chip and antenna are passively powered — no batt...
USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs
·
A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but we found it does a really good job of powering other miniature computers and mi...
PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
·
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2...
Ethernet Controlled 8 Channel Relay 16A
The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally open, normally closed, and common pins available on screw terminals. Individual...
USB Li-Ion Power Bank with 2 x 5V Outputs @ 2.1A - 5000mAh
·
Here's a hand-held-size rechargeable battery pack for your Raspberry Pi (or Metro, or anything else that uses 5V!). This pack is intended for providing a lot of power to a smartphone, tablet, etc, but we found it does a really good job of powering other miniature computers and micro-controller...
1Sheeld+
The 1Sheeld+ is a Bluetooth shield for Arduino that turns your smartphone into over 40 different Arduino shields. Connect your iPhone or Android device via the free 1Sheeld app, and use your phone's sensors, camera, GPS, social media, and more directly from your Arduino sketch. The shield acts a...
Multiple USB Card Reader , 4 IN 1 (Iphone, Micro, SD , Type C)
Unlock the versatility of your devices with the 4-in-1 iPhone Multiple USB Card Reader! This compact and efficient card reader is designed to seamlessly connect to your iPhone, Android, and USB-C devices, making it a must-have accessory for anyone on the go. Key Features: 4-in-1 Functionality:...
Bluetooth 4.0 RGB LED Strip Kit (Support iPhone Android)
The DFRobot Bluetooth 4.0 RGB LED Strip Kit combines a 3-metre WS2812 addressable LED strip with a Bluno (Arduino-compatible Bluetooth 4.0 board), sound sensor, and audio analyser. Control every individual LED from your iPhone or Android device via Bluetooth Low Energy — change colours in real ti...
Hamburger Mini Speaker
This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...
MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter
·
The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters ...
13.56MHz RFID/NFC Card - NTAG203 Chip
·
This blank 13.56 MHz RFID/NFC card contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The standard credit-card-sized form factor makes it suitable for access badges, information sharing, and NFC prototyping. The embedded chip and antenna are passively powered — no battery is need...
13.56MHz RFID/NFC White Tag - NTAG203 Chip
·
This blank 13.56 MHz RFID/NFC white tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact white disc form factor is commonly used for laundry tracking, garment identification, and general-purpose NFC tagging. The chip and antenna are passively powered — no battery is...
13.56MHz RFID/NFC Bracelet - NTAG203 Chip
·
This blank 13.56 MHz RFID/NFC silicone bracelet contains an NTAG203 chip with 144 bytes of writable EEPROM storage. It is passively powered — no battery is needed. Hold the bracelet a few centimetres from a compatible 13.56 MHz RFID/NFC reader to read or write data. The NTAG203 is a "Type 2" NFC...