All Products

SKU: AF-6310 · MPN: ADA6310

This breakout turns the ANO rotary encoder wheel into an easy-to-use I2C input device. The ANO wheel gives you a clicky, scroll-wheel-style interface with a rotary control plus five button switches, without needing to wire up all the individual pins yourself.An onboard microcontroller runs Adafru...

SKU: SF-SWG-20712

Stop guessing which antenna is which. This sticker sheet lets you label your antennas with their frequency, so you can quickly identify the right one when you reach into your parts drawer. Each sheet includes 75 stickers covering the most commonly used wireless frequencies — from 433MHz to 5.8GH...

SKU: SF-GPS-00177

This embedded GPS antenna with built-in LNA (Low Noise Amplifier) is designed for small, mobile applications. Its compact, unpackaged form factor makes it ideal for creating truly small GPS prototypes. Comes with a 5-inch cable terminated with a standard male SMA connector. Works well out of the...

SKU: PI-ANT-BITS

A set of three replacement soldering tips for the Antex XS25 soldering iron. Each tip offers a different profile to suit various soldering tasks, from fine-pitch SMD work to general through-hole soldering. Package Contents No. 51 – 2.3mm needle tip No. 53 – 2.3mm tip No. 55 – 0.5mm pointed t...

SKU: AF-4405

This anti-static ESD rework mat provides a safe working surface for electronic repair and assembly, especially when handling ESD-sensitive components. The high-resistance coating (tens of megaohms) dissipates static charge when connected to earth ground via the included grounding clip. The mat i...

SKU: LB-LS1137

This set of 9 ESD-safe tweezers covers a range of tip styles for precision electronics work. The anti-static coating helps prevent electrostatic damage when handling sensitive components, and the fine tips allow you to pick up and place very small parts with accuracy. All 9 tweezers come organis...

SKU: AF-430

These modular snap boxes are perfect for organising small SMD/SMT components and ICs. Made from anti-static black plastic, they protect ESD-sensitive parts while keeping them visible through the individual clear pop-open lids — only open the compartments you need, reducing the risk of mix-ups or ...

SKU: AF-4711

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power sources. Designed to be pin-compatible with the LM1117-3.3V TO-220 regulator, yo...

SKU: AF-2351

These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating produces a consistent, diffused white light that looks far better than mixing RGB...

SKU: AF-2343

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED used in DotStar LED strips, now available as individual components for custom desig...

SKU: AF-2350

These APA102 (DotStar) warm white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three warm white (~3000K) dies. The phosphor coating produces a consistent, diffused warm light that looks far better than mixing RGB ...

SKU: SF-COM-24838 · MPN: COM-24838

This APA102C, also known as DotStar, is a 5050-sized SMD addressable RGB LED for adding bright, colourful lighting to custom boards and compact projects.It has an integrated control circuit embedded inside the LED package, with the tiny controller chip and gold bond wires visible if you look clos...

SKU: SF-COM-25269 · MPN: COM-25269

The APA-104-1010 is a tiny addressable RGB SMD LED for designs where full-colour control needs to fit into very little board space. Each LED uses a standard one-wire data interface with data in and data out connections.At just 1.0 x 1.0mm square, these microscopic LEDs are suited to dense layouts...

SKU: AF-6461 · MPN: ADA6461

This compact breakout combines RGB colour sensing, true lux light measurement and infrared proximity detection in one I2C device. With library code running on your microcontroller, it can read red, green, blue and clear light levels, as well as detect how much IR light is reflected from an object...

SKU: AF-415

EL tape is the flat, wide cousin of EL wire — same glowing effect but in a 1cm-wide strip format. The glowing surface is 1cm wide (plastic coating is about 1.5cm), with adhesive on the back for easy mounting. Covered in a PVC-like material for weather resistance, though the connectors are not ful...

SKU: AF-476

This 30mm translucent blue arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade bu...

SKU: AF-471

This 30mm translucent clear arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade b...

SKU: AF-475

This 30mm translucent green arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade b...

SKU: AF-473

This 30mm translucent red arcade button features a crystal-clear glossy finish and smooth button action. A pre-installed micro-switch with gold-plated contacts provides a satisfying press with tactile feedback — no strong click, just a clean, definite feel. Shorter than standard cheap arcade but...

SKU: AF-3835

These quick-connect wire pairs make wiring arcade buttons and micro switches fast and simple. Each wire comes as a pair with two 0.187" quick-connect terminals pre-crimped, terminated together in a JST 2.5mm 2-pin connector that's breadboard compatible (fits 0.1" headers). Compatible with massiv...