All Products
Showing 1681-1700 of 8014 products · 2475 unavailable products hidden
Aluminum SMT Heat Sink - 0.27x0.27 square
Aluminum SMT Heat Sinks 10 Pack - 0.25x0.25 x 0.15 tall
Aluminum Stripe Grooved Case for Raspberry Pi 4, Inner Heatsink Pillars
Aluminum Stripe Grooved Case For Raspberry Pi 5
AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor
AM2315C - Encased I2C Temperature/Humidity Sensor
AM2320 Digital Temperature and Humidity Sensor
AM2320 Digital Temperature and Humidity Sensor
Ambient Light Sensor(0-200klx)
Ambient Light Sensor - TEMT6000x01
Ammonia Gas Sensor - MQ-137
AMP:BIT class D amplifier for micro:bit with headphone jack
Amphenol FCI Clincher Connector (2 Position, Female)
Amphenol FCI Clincher Connector (2 Position, Male)
Amphenol FCI Clincher Connector (3 Position, Female)
Amphenol FCI Clincher Connector (3 Position, Male)
Amphibious Horizontal Submersible Pump
Analog 2-axis Thumb Joystick with Select Button + Breakout Board
Analog CO/Combustible Gas Sensor(MQ9)
Analog Feedback Micro Servo - Plastic Gear
Aluminum SMT Heat Sink - 0.27x0.27 square
A compact aluminium heat sink from Cool Innovations, designed for surface-mount components such as SoCs, motor drivers, and other SMT packages. Trusted by engineers for its low cost, ease of use, and excellent thermal performance in a tiny footprint. The heat sink features four round fins for in...
Aluminum SMT Heat Sinks 10 Pack - 0.25x0.25 x 0.15 tall
A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them perfect for tight enclosures where every millimetre counts. Each heat sink fea...
Aluminum Stripe Grooved Case for Raspberry Pi 4, Inner Heatsink Pillars
A premium aluminium enclosure for the Raspberry Pi 4, featuring a stripe-grooved design on both top and bottom halves that enlarges the heat dissipation area for effective passive cooling. Built-in heatsink pillars make direct contact with the Pi's key components, conducting heat to the entire ca...
Aluminum Stripe Grooved Case For Raspberry Pi 5
A premium aluminium enclosure for the Raspberry Pi 5, featuring stripe-grooved surfaces on both top and bottom halves that significantly increase the heat dissipation area. Combined with built-in heatsink pillars and an included cooling fan, this case delivers robust thermal management for demand...
AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor
The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven AHT20 sensor, delivering reliable readings over standard I2C with support for 2.5...
AM2315C - Encased I2C Temperature/Humidity Sensor
The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with an updated sensor that supports a wider 2.5V to 5.5V supply range, making it co...
AM2320 Digital Temperature and Humidity Sensor
The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C communication, it's easy to integrate with any Arduino, Raspberry Pi, or CircuitPyth...
AM2320 Digital Temperature and Humidity Sensor
The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors and devices on the same bus. A great option for environmental monitoring projects...
Ambient Light Sensor(0-200klx)
A high-precision ambient light sensor housed in a transparent semisphere case for optimal light-gathering performance. With a wide 0–200 klx detection range and I2C communication, this sensor is ideal for applications requiring accurate ambient light measurement across a broad range of conditions...
Ambient Light Sensor - TEMT6000x01
The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light level. Its spectral response is closely matched to the human eye, making it idea...
Ammonia Gas Sensor - MQ-137
The MQ-137 is an ammonia (NH3) gas sensor from Winsen, designed to detect ammonia concentrations in the air. The sensing element is tin dioxide (SnO2), which has lower conductivity in clean air and increases in conductivity as ammonia gas concentration rises. A simple voltage divider circuit can...
AMP:BIT class D amplifier for micro:bit with headphone jack
The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...
Amphenol FCI Clincher Connector (2 Position, Female)
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to two f...
Amphenol FCI Clincher Connector (2 Position, Male)
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to two m...
Amphenol FCI Clincher Connector (3 Position, Female)
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to three...
Amphenol FCI Clincher Connector (3 Position, Male)
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to three...
Amphibious Horizontal Submersible Pump
A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and easy cleaning. With an IP68 waterproof rating, the pump can be fully immersed in w...
Analog 2-axis Thumb Joystick with Select Button + Breakout Board
A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, proportional X and Y readings for accurate positional control. The breakout board ...
Analog CO/Combustible Gas Sensor(MQ9)
The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it suitable for both domestic and industrial gas leak detection. The sensor operates...
Analog Feedback Micro Servo - Plastic Gear
A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...
