All Products

SKU: AF-1210

The Adafruit SMT Breakout PCB for 14-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 14-pin TSSOP footprint while the other supports 14-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1207

The Adafruit SMT Breakout PCB for 16-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 16-pin TSSOP footprint while the other supports 16-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1206

The Adafruit SMT Breakout PCB for 20-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 20-pin TSSOP footprint while the other supports 20-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1208

The Adafruit SMT Breakout PCB for 28-pin SOIC or TSSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates a 28-pin TSSOP footprint while the other supports 28-pin SOIC (narrow, medium, or wide), with traces routed to two rows of 0...

SKU: AF-1212

The Adafruit SMT Breakout PCB for 8-pin SOIC, TSSOP, or MSOP packages lets you easily prototype with surface-mount chips on standard solderless breadboards. One side accommodates an 8-pin TSSOP/MSOP footprint while the other supports 8-pin SOIC (narrow, medium, or wide), with traces routed to two...

SKU: AF-4560

The Adafruit Soft Flexible Wire NeoPixel Strand features 50 individually addressable RGB LEDs spaced approximately 100 mm (~4") apart on soft, plated wire. Unlike traditional flexible PCB strips that can crack when bent too far, these wire-based NeoPixels are ideal for costumes, wearables, and pr...

SKU: AF-6352 · MPN: ADA6352

This classroom-friendly kit pairs a micro:bit v2.2 with a simple soil sensor so students can monitor a pot plant and learn a bit of programming at the same time. It was designed to work with the "FarmBeats for Students" curriculum, where the micro:bit can show smile and frown status reports to in...

SKU: AF-6420 · MPN: ADA6420

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m above sea level) with ±3 Pa relative accuracy (~±0.25 m) and ±30 Pa absolute ac...

SKU: AF-6332 · MPN: ADA6332

The Adafruit Sparkle Motion Stick is a compact USB-A dongle version of the Sparkle Motion smart LED driver, designed for WLED projects that need a small, portable form factor. Powered via USB Type A at up to 5V 2A, it works with off-the-shelf USB battery packs for portable operation. The ESP32 m...

SKU: AF-6167 · MPN: ADA6167

The Adafruit Sparkle Motion with wFL External Antenna is the flagship WLED smart LED driver with support for an external Wi-Fi antenna via a wFL connector. It offers the same full feature set as the standard Sparkle Motion — dual power options, three level-shifted LED outputs, built-in audio and ...

SKU: AF-5643

The Adafruit SPI FLASH Breakout features a W25Q128 chip providing 128 Mbit (16 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontroller projects — perfect for files, images, fonts, and audio clips when a full ...

SKU: AF-5636

The Adafruit SPI FLASH Breakout features a W25Q64 chip providing 64 Mbit (8 MByte) of non-volatile flash storage over a standard SPI interface. It's ideal for adding compact, low-power external storage to microcontroller projects — perfect for files, images, fonts, and audio clips when a full SD ...

SKU: AF-6038 · MPN: ADA6038

The Adafruit SPI Flash SD Card breakout features an XTSD 2 GB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 2 GB FAT volume and works straight away with the built-in SD library in Arduino or th...

SKU: AF-4899

The Adafruit SPI Flash SD Card breakout features an XTSD 512 MB chip — an SD card in an SMT package that you can wire up like standard SPI flash but use with existing SD card libraries. It comes pre-formatted as a 512 MB FAT volume and works straight away with the built-in SD library in Arduino o...

SKU: AF-4718

The Adafruit SPI Non-Volatile FRAM Breakout provides 2 Mbit (256 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-4719

The Adafruit SPI Non-Volatile FRAM Breakout provides 4 Mbit (512 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times wit...

SKU: AF-1897

The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no page writes, no block erasing, and each byte can be written 10 trillion times with...

SKU: AF-4701

The Adafruit ST25DV16K is a unique I2C-programmable RFID EEPROM breakout that works with mobile phones as an ISO/IEC 15693 (13.56 MHz) NFC tag, but can be dynamically rewritten over I2C by a microcontroller. This makes it ideal for projects where you need to change tag content on the fly — for ex...

SKU: AF-5647

The Adafruit STEMMA Audio Amp is a compact mono Class D amplifier based on the PAM8302 chip, delivering up to 2.5W into 4 Ω speakers from a 2.0–5.5V DC supply. With over 90% efficiency at half a watt into 8 Ω, it's ideal for portable and battery-powered audio projects. This plug-and-play STEMMA ...

SKU: AF-5791

The Adafruit STEMMA Piezo Driver Amp uses the PAM8904 switched-capacitor driver to amplify signals for piezo elements at up to 300 kHz. With bridge-tied load (BTL) output and up to 3× voltage multiplication, it can deliver approximately 13 Vpp — much louder than driving a piezo directly from a 3V...