All Products
Showing 8121-8140 of 8856 products · 2585 unavailable products hidden
Teensy to Arduino R3 Shield Adapter
·
This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...
Teknikio Components - Heart LED Lights (4 Pack)
Red Heart-shaped sewable LED board. Product Details• Add light up LED Hearts to your crafts• LED light is Pink• Pack Includes 4x LED Hearts• Recommended Age 8+
Telephoto lens
Get in close with this telephoto lens, an excellent accessory for the Raspberry Pi Camera module. With a whopping 12x magnification and a sturdy clip to hold your camera board securely this lovely lens means that you no longer need to be right on top of your subject to get great phot...
Telescopic Antenna SMA - 300 MHz to 1.1 GHz (ANT700)
This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total length that is configurable from 9.5 cm to 24.5 cm. Each ANT700 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow. The ANT700 is a 50 Ohm anten...
Telescopic Antenna SMA - 75 MHz to 1 GHz (ANT500)
This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow. The ANT500 is a 50 ohm antenn...
Temperature and Humidity Sensor Module DHT11
DHT11 Temperature and Humidity sensor is as powerful as it used to be but easier to use. This DHT11 Arduino temperature and humidity sensor has a full range temperature compensation, low power consumption, long term stability and calibrated digital signal. A high-performance 8-bit mi...
Temperature and Humidity Sensor Module KY-028
Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is available at pin ‘AO’
Temperature Resistant Polyimide Tape 4mm x 30m
The polyimide tape is an insulator resistant to high temperatures.It is an essential accessory for assembly and use of your 3D printer.Tape with polyimide film as the backing material coated high temperature resistant silicone, color is dark brown (amber), tape good stickiness, good docile, hi...
Temperature Sensor - High Temperature, Waterproof (DS18B20)
A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to your microcontroller. It can even be parasitically powered from the data line. Ea...
Temperature Sensor Module DS18B20
A pre-wired DS18B20 digital temperature sensor on a breakout module with three labelled pins for easy connection. The DS18B20 uses the 1-Wire protocol, requiring only a single data line to communicate temperature readings to a microcontroller such as a Raspberry Pi, Arduino, or micro:bit. Key Fe...
Temperature Sensor - TMP36
This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to prov...
Temperature Sensor - Waterproof (DS18B20)
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a centra...
Tenergy T4s Intelligent Universal Charger - 4-Bay
The 4-Bay T4s Intelligent Universal Charger from Tenergy is an automatic smart charger compatible with almost all types of rechargeable batteries, thereby eliminating the need to own multiple chargers. Capable of automatically identifying and charging Lithium Ion (Li-ion), LiFePO4, NiMH and NiCD ...
TensorFlow Lite for Microcontrollers Kit
·
Machine learning has come to the 'edge' - small microcontrollers that can run a very miniature version of TensorFlow Lite to do ML computations. But you don't need super complex hardware to start developing your own TensorFlow models! We've curated a simple kit to dip your toes into machine ...
TEPT4400 3mm Ambient Light Sensor
·
This Vishay TEPT4400 is a small ambient light sensor built around a silicon NPN epitaxial planar phototransistor. It is designed to respond to visible light in a way that is similar to the human eye.Use it for simple light-level detection, day/night sensing, display brightness control, or maker p...
TE Puck PCB Mount GPS Antenna
·
This compact GPS puck antenna is designed for surface mounting directly to a PCB, making it a neat option for embedded GPS designs where space is limited.The antenna measures 16mm in diameter and 6.05mm high, with a GPS frequency range of 1565MHz ~ 1585MHz. It uses RHCP polarisation and a 50 Ohms...
TermDriver 2 USB-to-Serial Adapter with IPS Display
·
This compact USB-to-serial interface adds a built-in screen to the serial adapter workflow, so you can see data passing by instead of debugging blind. It handles everything from low-speed console output to high-speed UART traffic, with line status and traffic visible on the device itself.The disp...
Terminal Block - 2-pin 3.5mm - pack of 5!
·
Screw terminal blocks are the clean, maintainable solution for PCB-to-wire connections — no solder, no loose ends, easy to swap out later. These 3.5mm pitch 2-pin blocks are a practical size: wide enough for a range of wire gauges, compact enough not to dominate your board, and designed to snap t...
Terminal Block - 3-pin 3.5mm - pack of 5!
·
Nothing makes a project harder to maintain than a lot of loose wiring. That's why we like to use terminal blocks whenever making PCB-to-Wire connections. These particular 3.5mm terminal blocks are our favorite: big enough for a range of wire gauges, easy to adjust with a screwdriver, and not t...
Terminal block - 4 pin Euro-Style
·
Connect this to that without soldering using these quick terminal blocks. They allow connecting of two sets of four wires together using just a flat-head screwdriver. These are UL rated to carry up to 15 Amps, so they're great for high current LED strips! Can be used with wires from 14AWG to 22 AWG
