All Products
Showing 8061-8080 of 8819 products · 2581 unavailable products hidden
Tattu 1050mAh
Tattu 3S 11.1V 1050mAh 75C LiPo Battery (XT-60)The Tattu 3S 1050mAh LiPo battery is a compact powerhouse designed with Micro UAVs and high-performance RC applications in mind. With a discharge rate of 75C (and a burst rate of 150C), this pack delivers serious punch while keeping the weight down—j...
TB6600 arduino Stepper Motor Driver
The TB6600 is a professional stepper motor driver for two-phase stepping motors, compatible with Arduino and other microcontrollers that output 5V digital pulse signals. With a wide 9–42VDC power input and up to 4A peak current output, it handles most 42-type and 57-type stepper motors. Features...
TC01 Non-contact 16x4 Pixel Infrared Temperature Sensor
The TC01 is a non-contact infrared temperature sensor with a 16×4 pixel array, producing a 64-pixel thermal image. Housed in a waterproof, dustproof metal enclosure (IP65), it communicates via RS485 using the standard Modbus-RTU industrial protocol for easy integration with industrial controllers...
TCA9548A I2C Multiplexer
·
The TCA9548A 1-to-8 I2C multiplexer solves the common problem of needing multiple I2C devices with the same address on a single bus. It acts as a gatekeeper, routing I2C traffic to any of its eight downstream channels on command. Simply write a single byte to the multiplexer's I2C address (defau...
T-Connector For Silicone Tubing - 5 Pack
·
These T-shaped barbed connectors allow you to split or combine silicone tubing runs into three-way junctions. Each port has an outer diameter of approximately 4 mm, designed to fit snugly with 3 mm ID silicone tubing for a secure seal. Key Features T-Junction Design – Three-way barbed connecto...
TCR2EF33 Fixed 3.3V 200mA Voltage Regulator
·
This compact CMOS regulator provides a fixed 3.3V single output for low-current electronics projects and embedded hardware. It is rated for up to 200mA output current and is intended for surface-mount designs.The regulator includes an on/off control input, making it suitable for circuits that nee...
TCS3200 RGB Color Sensor For Arduino
An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a frequency output that can be read directly by a microcontroller. The sensor co...
TCS3430/TCS34303 Ambient Tri-Stimulus Colour Sensor
·
This breakout brings ambient light tri-stimulus colour sensing to your project using CIE XYZ plus an IR channel, rather than the more common RGB-style approach. It is designed for applications where you want access to the raw sensor count data so you can match and calibrate it to your own colour ...
TCS34725 RGB Color Sensor For Arduino
The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR blocking filter, it delivers accurate colour readings under varied lighting condi...
Techspray Solder Wick #2 Yellow 1.4mm x 1.524m
·
This Techspray solder wick is a pre-fluxed copper desoldering braid for removing solder from PCB joints, pads and accidental solder bridges. It is a handy bench consumable for component replacement, PCB rework, repair and prototyping.To use it, place the wick over the solder joint and apply your ...
Teensy 3.1 XBee Adapter
The Teensy 3.1 XBee Adapter connects your Teensy development board with the popular XBee wireless module, giving you a compact solution for projects requiring a reliable, no-frills wireless serial link with decent range. The adapter also doubles as a breakout board for both the Teensy and XBee. ...
Teensy 3.x Feather Adapter
·
The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...
Teensy 4.0
The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same size as the Teensy 3.2 — it delivers exceptional processing power with a dual-issu...
Teensy 4.0
Teensy 4.0: High Performance in a Compact Form The Teensy 4.0 is a powerful, compact development board measuring just 1.4" × 0.7". It features the blazing-fast 600 MHz ARM Cortex-M7 processor, built on the NXP iMXRT1062 chip — currently the fastest microcontroller available. Maintaining the same ...
Teensy 4.0 (Headers)
Teensy 4.0 features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today. Teensy 4.0 is the same size and shape as Teensy 3.2, and retains compatibility with most of the pin functions on Teensy 3.2. The best part of this version of Teensy 4....
Teensy 4.0 Lockable Development Board
·
This lockable Teensy 4.0 is a compact, very fast development board built around the NXP MIMXRT1062DVL6B ARM Cortex-M7 microcontroller. It runs at 600 MHz and keeps the familiar Teensy footprint and breadboard-friendly layout, making it suitable for demanding embedded, audio, control and connected...
Teensy 4.1
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Teensy 4.1 (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size ...
Teensy 4.1 Lockable Microcontroller Board
·
This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...
Teensy 4.1 Lockable Without Ethernet
·
This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...
