All Products

SKU: AF-2048

Oh say can you see By the knob's early light... Sorry - we thought that was clever.  And while it wasn't really, this potentiometer knob definitely is.  It's a 'soft touch' T18 knob that works great with our Panel Mount 10K, Panel Mount 1K, and Panel Mount 100K potentiomet...

SKU: AF-2046

Oh say can you see By the knob's early light... Sorry - we thought that was clever.  And while it wasn't really, this potentiometer knob definitely is.  It's a 'soft touch' T18 knob that works great with our Panel Mount 10K, Panel Mount 1K, and Panel Mount 100K potentiomet...

SKU: AF-2047

A soft-touch T18 potentiometer knob in white with a rubbery grip for comfortable, precise adjustment. Features a white indicator line on the outside for clear position visibility. Designed to press-fit directly onto T18 splined potentiometer shafts for a secure connection. Compatible with standa...

SKU: LB-LS1673

This Potentiometer Module is from our Micro:bit 24 bit kit. You're probably already familiar with using a potentiometer as they are commonly found on many electrical devices, such as in audio equipment where they are used for volume control. After all, potentiometers are sensors! What's a sens...

SKU: DF-FIT0189

Variable resistors also named as potentiometer are electrical equipments having two terminal points in opposite direction. The terminals are used for electrical resistance in a circuit board. Variable resistors are very economical and helpful for every kind of electronic and electrical circuit...

SKU: SF-COM-28384 · MPN: COM-28384

A compact thumbwheel potentiometer for adding analog control to your projects. The ergonomic wheel design allows for easy adjustment with one finger, making it perfect for volume controls, parameter adjustment, and user interfaces. Connect VCC to one outer pin, GND to the other, and the center p...

SKU: LB-LS2921

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiometer with Built In Knob - 10K ohm

SKU: AF-4133

A compact 10K ohm linear potentiometer with a built-in knurled plastic knob — no separate knob needed. The 0.1" pin spacing plugs directly into a standard breadboard, making it perfect for prototyping and quick adjustments. Larger than a trim-pot but smaller than a full-size panel-mount potentio...

SKU: PH-106133 · MPN: 106133

The Power Bank KeepAlive (USB-C) prevents power banks from automatically shutting off when connected to low-power devices. It uses a 555 timer circuit to pulse a small amount of current through the USB-C port, keeping the power bank active even when drawing minimal power. This assembled SMD vers...

SKU: EF-EF03409

ELECFREAKS Power:bit is a kind of micro:bit extension board with minimum size. It is powered by two 2025 button batteries and carries a buzzer on the board

SKU: EF-EF08196

Power:bit button cell board is a micro expansion board in the smallest size equipped with a buzzer. It can not only supply power to the board but is also equipped with P1, P2,GND and 3V ports by the row needles, which can be used with our acrylic watch straps and boards.Assembly DrawingFix your m...

SKU: AF-2030

PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. With a beefy 4A DC/DC converter, it can give you 1A+ from as low as 2...

SKU: AF-2465

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...

SKU: AF-1903

The PowerBoost 500 Basic is a compact DC/DC boost converter that takes input from 1.8V or higher and outputs a steady 5.2V — perfect for powering portable 5V projects from batteries. The slightly elevated 5.2V output provides headroom for cable resistance and high-current draws, preventing brown-...

SKU: SS-110990161

A handy assortment of six power connector adaptors and converters for prototyping, electronics projects, and bench setups. This pack covers the most common power connector types — barrel jack, BNC, JST, and screw terminal — so you can quickly adapt between different power sources and devices. Pa...

SKU: AF-737

This power distribution bus is machined from a single piece of solid brass, providing a reliable way to distribute power across multiple wires in a project. Seven screw-terminal holes accept wires of 20 AWG or larger (up to 6 mm diameter), making it well suited for robotics, LED pixel grids, and ...

SKU: KI-46124

The MonkMakes Speaker Board is a compact, amplified speaker designed for the BBC micro:bit. Simply connect it with crocodile clips and start adding sound to your micro:bit projects — despite its small size, the speaker is surprisingly loud. Key Features Amplified Output – Built-in amplifier fo...

SKU: DF-DFR0940

This power filter board for Raspberry Pi integrates solid capacitors, ceramic capacitors, and tantalum capacitors in a parallel hybrid filtering configuration. It filters low, mid, and high-frequency power noise from your supply, delivering cleaner power to the entire system — particularly benefi...

SKU: PL-2145

The HD-1600A analog servo from Power HD is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included.Key specs at 6 V: 0.10 sec/60°, 18 oz-in (1.3 kg-cm), 6.0 g.

SKU: WS-18014

POE HAT FOR RASPBERRY PI Power Over Ethernet HAT For Raspberry Pi 3B+/4B, 802.3af-Compliant(Any Backward-Compatible Future Versions Will Be Supported As Well) OLED for real-time monitoring temperature, IP, and fan status The PoE HAT (B) is a 802.3af-compliant Power Over Ethernet accessory...