All Products

SKU: AF-4193

A slim 2×AA battery holder with a built-in on/off switch and genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and portable builds without needing to disconnect the battery to turn off power. The...

SKU: AF-4194

A slim, open-top 2×AA battery holder with a genuine JST PH connector. Two AA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, Adafruit boards, and microcontrollers with JST PH battery inputs. The JST PH connector polarity matches Adafruit's Li-I...

SKU: TB-RR0559

A pack of eight 300Ω metal film resistors rated at 0.5W (½W) with 1% tolerance. These through-hole axial resistors are the same physical size as standard ¼W carbon film types, making them a drop-in upgrade where higher power handling is needed. Specifications Resistance – 300Ω Tolerance – 1% ...

SKU: LB-LR0281-11

A bulk assortment of 300 through-hole LEDs in both 3mm and 5mm sizes, covering five popular colours. All LEDs come organised in a handy storage case, making it easy to find the right colour and size for your project. Key Features 300 LEDs Total – 200× 3mm and 100× 5mm 5 Colours – Red, green, ...

SKU: PL-993

A miniature low-power brushed DC motor with a 29.86:1 metal gearbox, designed for robotics and compact mechanical projects. The 6V LP (Low Power) variant draws minimal current while delivering useful torque through the metal gear train. The D-shaped output shaft is compatible with a wide range o...

SKU: TB-SZ2042

An inline standard blade fuse holder with an integrated failure indicator lamp that lights up when the fuse blows. This makes it easy to identify a blown fuse, especially in crowded or hard-to-reach wiring locations. The water-resistant housing is suitable for automotive and marine applications. ...

SKU: TB-BM7134

A hands-on project book by Simon Monk featuring 30 practical Arduino-based builds. Each project includes component lists and step-by-step instructions, taking you from basic circuits through to more advanced builds using sensors, motors, and displays. Part of the popular "Evil Genius" series fro...

SKU: AF-868

A hands-on project book by Simon Monk featuring 30 practical Arduino-based builds. Each project uses easy-to-find components and step-by-step instructions, making it accessible even without prior programming experience. The book covers simplified C programming on Windows, Mac, and Linux platforms...

SKU: AF-1547

A strand of 20 digitally-controllable RGB LED pixel dots, each containing three 5050 RGB LEDs and a WS2801 controller chip. The pixels are encased in translucent white 30mm domes for weatherproof operation and even 180° colour spread, making them well-suited for outdoor signage and large-scale li...

SKU: DF-FIT0630

A 30-pin FPC cable designed specifically for connecting the LattePanda Alpha and Delta single-board computers to their 7-inch eDP display. The ultra-thin, flexible design with interference shielding ensures reliable video signal transmission in compact builds. Key Features LattePanda Compatibl...

SKU: EC-WRF31501R

A basic 315MHz RF link kit consisting of a transmitter and receiver module pair. Commonly used for simple wireless remote control, data transmission, and sensor communication between microcontrollers. Works well with the Arduino VirtualWire library for easy integration. The transmitter accepts 3...

SKU: EC-WRF315KIT

A simple 315MHz wireless controller kit consisting of a 4-button RF keyfob remote and a matching receiver module. No programming or microcontroller is required — power the receiver with 5V DC and press a button on the keyfob to activate the corresponding output pin. Uses SC2273-L4 and SC2272-M4 ...

SKU: LB-32G-MICROSD

A 32GB Class 10 microSD card pre-loaded with the latest Raspberry Pi OS, ready to boot on any Raspberry Pi model including the Raspberry Pi 5. Simply insert the card, power on your Pi, and you're up and running — no manual OS installation required. These microSD cards are tested by the Raspberry...

SKU: LB-32G-NOOBS

A Transcend 32GB Class 10 microSD card pre-loaded with the official Raspberry Pi NOOBS (New Out of Box Software) installer. NOOBS provides a simple menu-driven interface to choose and install your preferred Raspberry Pi operating system on first boot. Includes a full-size SD card adapter. Key Fe...

SKU: SF-COM-28380 · MPN: COM-28380

Add a colour touchscreen to your Teensy project with this 3.2 inch TFT display. It provides 320x240 resolution for higher-resolution graphics and uses the ILI9341 display controller.The supplier recommends this display for use with Teensy 3.2 through to Teensy 4.1. It suits projects that need a c...

SKU: AF-5828 · MPN: ADA5828

This rectangular TFT module is for projects that can drive a high-pixel-count RGB TTL display directly. It provides 320x820 pixels with RGB666 16-bit full-colour output on an IPS panel, so colours stay clear at wide viewing angles.It uses an ST7701S TFT driver. SPI is used only to configure the d...

SKU: WS-20755

A compact 3.2" IPS LCD display with an HDMI input, delivering 480×800 resolution with wide 160° viewing angles and adjustable backlight brightness. Driver-free on most platforms — simply connect via HDMI and power via USB. Compatible with all Raspberry Pi models, NVIDIA Jetson Nano, and Windows ...

SKU: AF-4278

A 3.2" TFT LCD display module with a built-in resistive touchscreen. The 320×240 pixel screen is driven by the ILI9341 chipset and supports SPI, 8-bit parallel, and 16-bit parallel interfaces. This is the bare display module only — no PCB or breakout board is included. A 50-pin, 0.5 mm pitch, to...

SKU: AF-1743

A large 3.2" colour TFT LCD breakout board with a built-in resistive touchscreen and a microSD card socket. The 240×320 pixel display is driven by the ILI9341 chipset and features a bright 6-LED white backlight. The breakout board includes 3–5 V level shifters, making it compatible with both 3.3 ...

SKU: EC-AMC01219U

An all-in-one development board combining an ATmega32U4 microcontroller with an A9G GPRS/GSM/GPS module. Capable of making voice calls, sending SMS text messages, and providing GPS positioning — all controllable via AT commands over serial. The board includes analogue, I2C, and digital expansion ...