All Products
Showing 4281-4300 of 8651 products · 2516 unavailable products hidden
Hydra USB Power Breakout Cable - 6ft Black
MPN: DD-21211
Hydro Dipping Sheets – 10 Pack of A4 Size Sheets
Hydrogen Sulfide Gas Sensor - MQ-136
I2C 16x2(1602) LCD Display for Arduno
I2C 20x4(2004) LCD Display for Arduino
I2CDriver by Excamera Labs
I2CMini by Excamera Labs
I2C RGB Backlight LCD 16x2 Display Module for Arduino (RGB Text)
i2c / SPI character LCD backpack
I2C Temperature & Humidity Sensor (Stainless Steel Shell)
I2C to 8-Channel Solenoid Driver
MPN: ADA6318
I2S MEMS Microphone Breakout - ICS-43434
MPN: ADA6049
I2S Microphone Module
Ibis board 3.3v Power supply for Micro:bit
ICE Tower Cooler for Raspberry Pi 5 Single Board Computer
ICE-Tower Cooling Fan for Raspberry Pi
IC Hook with Pigtail
IC Socket - for 16-pin 0.3 Chips - Pack of 3
IC Socket - for 20-pin 0.3 Chips - Pack of 3
IC Socket for 40-pin 0.6 Chips - Pack of 3
Hydra USB Power Breakout Cable - 6ft Black
· MPN: DD-21211
The Hydra is a handy USB power breakout cable for powering maker projects from a USB power supply or computer. It brings out the USB 5V and GND lines so you can connect them to common project power inputs without building a one-off cable yourself.At the output end, the cable breaks power out to t...
Hydro Dipping Sheets – 10 Pack of A4 Size Sheets
Hydro dipping is a fun, hands-on way of adding printed designs to any surface! This process can be done on any material that can hold the base coat and can be submerged into water. Works really well with any 3D printed project, but molded and cast parts also benefit. You've probabl...
Hydrogen Sulfide Gas Sensor - MQ-136
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher along with the gas concentration rising. A simple circuit makes measuring this c...
I2C 16x2(1602) LCD Display for Arduno
This is an 16x2 LCD display screen with with I2C interface. It is able to display 16x2 characters on 2 lines, white characters on blue background. Usually, Arduino LCD display projects will run out of pin resourceseasily, especially with Arduino Uno. And it is also very complicated with the wi...
I2C 20x4(2004) LCD Display for Arduino
A 20×4 character I2C LCD display module compatible with Arduino and other microcontrollers. It shows white characters on a blue backlit background, and the I2C interface means you only need two data pins (SDA and SCL) instead of the six or more required by a standard parallel LCD. The module sup...
I2CDriver by Excamera Labs
I²CDriver is an easy-to-use, open source tool for controlling I²C devices and a great tool to help with quick driver development and debugging. It works with Windows, Mac, and Linux, and has a built-in color screen that shows a live “dashboard” of all the I²C activity. It uses a standard FTDI USB...
I2CMini by Excamera Labs
I²CMini is an easy-to-use, open-source tool for controlling I²C devices over USB, 100% compatible with I²CDriver. Its a small friend that will make working with I2C a breeze, especially if they have a Qwiic/Stemma QT or even Grove I2C connector! USB to I²C interface in a tiny 18x18mm board Can a...
I2C RGB Backlight LCD 16x2 Display Module for Arduino (RGB Text)
This shield with a 16×2 RGB LCD screen could bring you a brand-new experience with an LCD screen!The RGB LCD shield extends all IOs of Arduino UNO on the back, by which you can connect with modules like sensors, LEDs, and servos while using this screen to display content. More possibilities for y...
i2c / SPI character LCD backpack
LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project talk back to you. Character LCDs are common, and easy to get, available in tons of colors and sizes. We've written tutorials on using character LCDs with an Ard...
I2C Temperature & Humidity Sensor (Stainless Steel Shell)
This I2C digital temperature & humidity sensor offers high accuracy of ±3.0RH% for humidity and ±0.5°C for temperature and features a user-programmable humidity & temperature alarm function.Its housing is made of 304 stainless steel to ensure good impact resistance, heat resistance, low temperatu...
I2C to 8-Channel Solenoid Driver
· MPN: ADA6318
This driver board makes it much easier to control multiple solenoids from a microcontroller over I2C. It uses an MCP23017 GPIO expander so you do not need to dedicate lots of pins just to switch a bank of clicky, inductive loads.Solenoid power connects through the centre terminal blocks, with eac...
I2S MEMS Microphone Breakout - ICS-43434
· MPN: ADA6049
Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much smaller and thinner, and this one outputs digital I2S audio rather than an analogu...
I2S Microphone Module
A compact digital MEMS microphone module based on the MSM261S4030H0 chip, providing 24-bit I2S digital audio output. The built-in I2S interface connects directly to DSPs and microcontrollers without requiring an external codec, simplifying audio capture designs. An on-board SK9822 RGB LED provide...
Ibis board 3.3v Power supply for Micro:bit
Micro:bit Power Supply Module 3.3V 2A is a kind of power module for micro:bit. The output voltage of 3.3v can be connected directly to the battery connector of the micro:bit, providing strong and steady power supply for micro:bit. Packing List 1 x Micro:bit Power Supply Module 3.3V 2A ...
ICE Tower Cooler for Raspberry Pi 5 Single Board Computer
The ICE Tower Cooler is a high-performance tower-style cooling solution designed specifically for the Raspberry Pi 5. It features a tall aluminium heatsink with multiple fins for maximum surface area, topped with an adjustable-speed fan and RGB lighting. The fan automatically adjusts its speed b...
ICE-Tower Cooling Fan for Raspberry Pi
A tower-style CPU cooler for the Raspberry Pi, combining a 5mm copper heatpipe, multi-layer aluminium heat sinks, and a 7-blade fan to significantly reduce operating temperatures. Under overclocking conditions, it can bring the Pi's temperature down from around 80°C to approximately 40°C. Compat...
IC Hook with Pigtail
These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of different colors (black, red, white, blue, and green). We use them with the Bus P...
IC Socket - for 16-pin 0.3 Chips - Pack of 3
An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 16 pin 0.3" wide version. Best used with chips that have 16 pins (2x8) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto ...
IC Socket - for 20-pin 0.3 Chips - Pack of 3
An IC (Integrated Circuit) socket allows you to insert and remove chips easily from an assembled kit or project This item contains 3 of the 20 pin 0.3" wide version. Best used with chips that have 20 pins (2x10) and have 0.3" pin spacing. These are often used for soldering into a Perma Proto...
IC Socket for 40-pin 0.6 Chips - Pack of 3
These 40-pin IC sockets let you insert and remove DIP chips without soldering them directly to your PCB. Solder the socket into your board once, then swap chips freely — useful for prototyping, testing, or any project where you may need to replace an IC. Key Features 40-Pin DIP Socket – Fits 4...
