All Products

SKU: DF-FIT0206

This is a 1-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pins(PH2.54)) SPECIFICATIONS Material: Plastic Pitch: 2.54mm/ 0...

SKU: DF-FIT0207

This is a 2-pin female housing pin with a pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pins(PH2.54)) SPECIFICATIONS Material: Plastic Pitch: 2.54mm/ 0...

SKU: DF-FIT0208

This is a 3-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pins(PH2.54)) SPECIFICATIONS Material: Plastic Pitch: 2.54mm/ 0.1...

SKU: DF-FIT0209

A 4-pin female housing connector with a standard 2.54 mm (0.1") pitch. Use these to create custom cables that mate with 0.1"-spaced header pins on breakout boards, sensors, and development boards. Note: Does not include metal crimp pins, which are required and sold separately. Specifications ...

SKU: SF-COM-13716

The FemtoBuck is a compact, single-channel constant-current LED driver capable of driving high-power LEDs at up to 350 mA with input voltages up to 36 V. Dimming is controlled via PWM or an analog signal (0–2.5 V), and the driver achieves approximately 95% efficiency across its operating range. ...

SKU: DF-DFR0934

This is a 1.51” SSD1309 transparent monochrome OLED display (light blue) with a converter. It offers a resolution of 128×64 (The completely transparent area is 128×56.  There is a small section near the pins that are not transparent but still can display content), full-view, and blue disp...

SKU: DF-DFR0928

A 1.8-inch IPS TFT LCD display module with 128×160 resolution and an integrated microSD card slot for reading full-colour bitmaps. Driven by the ST7735S chip over SPI (4-wire), the display offers a 120° viewing angle and low power consumption, making it suitable for sensor dashboards, status moni...

SKU: DF-DFR0843

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are not compatible. Apart from the poor experience you encountered, this also cause...

SKU: DF-DFR0844

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are not compatible. Apart from the poor experience you encountered, this also cause...

SKU: DF-DFR0792

This ADKey board with 10 keys can be used to drive your DFPlayer Pro, DFPlayer Mini, or Voice Recorder Module without programming or using various resistors. It offers 20 delicate button caps with comfortable hand feel, easy to be integrated into projects. You can also connect...

SKU: DF-SEN0527

The Fermion AHT20 is a high-precision, low-cost temperature and humidity sensor breakout from DFRobot. Built around an improved MEMS semiconductor capacitive humidity sensor element, it communicates over a standard I2C interface and operates across a wide 2–5 V supply range. The sensor performs ...

SKU: DF-SEN0629 · MPN: SEN0629

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accuracy, ±3% humidity accuracy, and ±0.6 hPa pressure accuracy, it offers reliable env...

SKU: DF-SEN0419

The BMM150 is a low-power and low noise 3-axis digital geomagnetic sensor that perfectly matches the requirements of compass applications. Based on Bosch’s proprietary FlipCore technology, the BMM150 provides absolute spatial orientation and motion vectors with high accuracy and dynamics. Featuri...

SKU: DF-SEN0622 · MPN: SEN0622

Introduction The Fermion: BMM350 3-Axis Geomagnetic Sensor is a high-performance magnetometer designed to measure magnetic fields across three axes, functioning as a precise electronic compass. Utilizing Bosch’s patented FlipCore technology, it provides accurate spatial orientation without requir...

SKU: DF-SEN0423

A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consumption — making it ideal for indoor positioning, altitude tracking, and environme...

SKU: DF-SEN0667 · MPN: SEN0667

This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute pressure accuracy for detecting small altitude, floor-level or liquid-level changes.T...

SKU: DF-SEN0666 · MPN: SEN0666

This compact Fermion breakout brings the Bosch BMP585 MEMS pressure and temperature sensor to a tiny board for projects where space, power use and reliable environmental sensing matter. It measures barometric pressure for altitude and vertical movement applications, with typical absolute pressure...

SKU: DF-SEN0663 · MPN: SEN0663

This ultra-compact particulate matter sensor breakout is built around the Bosch BMV080 sensing unit, using laser-based light scattering with a fanless measurement principle. It can monitor PM1, PM2.5 and PM10 mass concentrations while avoiding the noise, dust build-up and mechanical wear associat...

SKU: DF-SEN0691 · MPN: SEN0691

The Fermion C4002 is a 24GHz FMCW mmWave radar module designed for true human presence detection, including motion, stationary people and micro-movements such as breathing or chest expansion. It is aimed at smarter automation than traditional PIR sensors, which can miss occupants who are sitting ...

SKU: DF-DFR0768

Here comes the DFPlayer Pro---A mini simple but powerful MP3 Player! This MP3 player module supports four controlling modes: Arduino, AT command, on-board buttons, and ADKEY. You can directly press the on-board button to play or switch music without using a controller. Moreover, this player modul...