All Products

SKU: LB-00021

Reshipping an order via Regular Parcel Post

SKU: AF-1662

Streeeeetch your resistive touch-screen's reach with a 20cm extension cord. This is a great accessory for our resistive touch screen controller breakouts. Plug your 4-pin 1mm pitch FPC into the socket end and the other end into your controller board. Pretty nice! The socket connector on the cable...

SKU: AF-1676

If you already have a 7" TFT that is about 165mm x 105mm in size (with a visible area equal to or smaller than 152mm x 91mm), you can put this glass resistive overlay over it to add a resistive touch screen. To use, first remove the protective plastic wrap from both sides. Attach to your touc...

SKU: AF-1580

Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. If you want to connect one to a computer you need something to handle the analog to digital conversion. Most converters we've found are not very easy ...

SKU: SF-PRT-14493

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with...

SKU: SF-PRT-14491

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and general prototyping. Specifications Resistance – 10 kΩ Tolerance – ±5% Pow...

SKU: SF-COM-08374

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. Need more than one? Checkout our bag of resistors. If you need a bunch of these, you can get good bulk discounts on Digike...

SKU: SF-COM-11508

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and current limiters. We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). These resistors...

SKU: SF-COM-11853

1.0M Ohm, ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). Note: Sold as singles. But check below for multi-packs. Documents: Breadboard Lectu...

SKU: SF-PRT-14492

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with ve...

SKU: SF-PRT-14494

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1M ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with ver...

SKU: SF-PRT-14490

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly used as LED current limiters and for general-purpose circuit applications. Spe...

SKU: SF-COM-08377

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors. If you need a bunch of these, you can get good bulk discounts ...

SKU: PI-COM-B005

580 resistors (29 values, 20 pieces of each) go into this great starter pack (or refill!) with a wide range of useful values. The kit contains 20 each of:10Ω22Ω47Ω68Ω100Ω120Ω150Ω180Ω220Ω270Ω330Ω470Ω560Ω680Ω1kΩ1.2kΩ1.5kΩ1.8kΩ2.2kΩ2.7kΩ3.3kΩ4.7kΩ5.6kΩ6.8kΩ8.2kΩ10kΩ22kΩ47kΩ100kΩ Rated for&nb...

SKU: SF-COM-10969

Resistors are a good thing, in fact, they’re actually crucial in a lot of circuit designs. The only problem seems to be that resistors disappear into thin air. The only way to be sure that you’re gonna have the resistor you need when you need it is to stock up, and keep them organized. We have...

SKU: LB-LR0679

A comprehensive through-hole resistor assortment in a labelled plastic storage case. Includes 17 different values from 0Ω to 1MΩ, with 525 resistors total — all 1/4W metal film with 1% tolerance. A colour code guide is included for easy identification. Key Features 525 Resistors – 17 popular v...

SKU: SF-TOL-13114

A dual-sided resistor lead forming tool for bending component leads to precise through-hole spacing. One side handles 1/4W resistors with spacing from 0.4" to 1.5" (10–38mm), and the other handles 1/2W resistors with spacing from 0.5" to 1.5" (13–38mm). Simply insert a resistor into the desired g...

SKU: SF-COM-10855

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line component is actually 5 individual 330 Ohm resistors that share a common terminal on pin 6 (denoted with ...

SKU: AF-5472

Why are bananas never lonely? Because they hang around in bunches!A lot of power supplies, multimeters, and other benchtop equipment use standard 4mm banana plugs to connect this-to-that. When you need more, we now stock them! These are handy stackable and retractable Banana P...

SKU: AF-5471

A 0.5-metre red banana plug cable with stackable connectors and retractable safety shrouds. The spring-loaded plastic cover retracts automatically when plugged into a 4 mm banana jack, then extends to cover the metal tip when disconnected — preventing accidental shorts on your workbench. Standar...