All Products

SKU: AF-3436

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, and WAV — and includes an on-board 3W class-D stereo amplifier so you...

SKU: SF-PRT-26988 · MPN: PRT-26988

This is a short piece of spring steel music wire that can be bent to the shape you need for small mechanisms, linkages, prototypes or craft builds.Each unit is supplied as an individual 6 inch length with a fine 0.025 inch outer diameter, making it useful where a slim, resilient steel wire is req...

SKU: DF-DFR0512

The MXChip Azure IoT Developer Kit is an Arduino-compatible development board designed for building cloud-connected IoT applications with Microsoft Azure. It features an STM32F412 ARM Cortex-M4F microcontroller, built-in Wi-Fi, and a rich set of on-board sensors — ready to connect to Azure IoT se...

SKU: SF-DEV-28021 · MPN: DEV-28021

Add stand-alone audio playback to an Arduino project with this serial MP3 player shield based on the MY1690X decoder IC. It can play MP3 and WAV files from a standard microSD card, making it handy for music, voice prompts and sound effects.The shield is controlled over a serial UART command set a...

SKU: JU-R-E226

The My Enemies Tears Lapel Pin is perfect for those who want to show their support for the fight against enemy happiness. This lapel pin is made of high-quality metal and features the My Enemies Tears wording on a blue bottle. It's a great way to show your support for a worthy cause.

SKU: PI-RPI-017

Proud of your Pi? Let the world know! Measuring 76mm x 53mm, this eye catching little sticker will brighten up any laptop, desktop, monitor, car bumper, coffee machine, Anglepoise lamp, or anything else you can think of!

SKU: SF-DEV-18426

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your Arduino and connect the sensors to read up to si...

SKU: SF-DEV-27924 · MPN: DEV-27924

Control a project with muscle activity instead of buttons, levers or joysticks. The MyoWare® 2.0 Muscle Sensor is an all-in-one surface electromyography (sEMG) sensor that detects the electrical signals generated when a muscle flexes, then outputs an analogue signal representing the strength of t...

SKU: SF-CAB-19244

The MyoWare 2.0 Reference Cable extends the reference pin on the MyoWare 2.0 Muscle Sensor, allowing you to place the reference electrode on a separate part of the body. This is useful when the sensor's built-in reference pin cannot reach a suitable location, such as a bony portion of the elbow o...

SKU: SF-KIT-19627

This is a 10 pack of the MyoWare® Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing and place a biomedical sensor pad into the electrode snap. When ready, stick th...

SKU: SF-KIT-27921 · MPN: KIT-27921

This all-in-one MyoWare 2 electromyography (EMG) kit gives you the essentials for measuring and visualising muscle activity. It is Arduino-compatible, but the included setup is designed to follow the standalone example from the MyoWare 2 Muscle Sensor Guide, so you can use it without a microcontr...

SKU: SF-KIT-27920 · MPN: KIT-27920

This all-in-one electromyography (EMG) kit gives you the MyoWare 2 boards needed to experiment with different muscle-sensing setups. Depending on how you configure it, you can visualise muscle activity with the MyoWare 2 LED Shield or read an analogue output with an Arduino-compatible microcontro...

SKU: JU-JU-W-LP326 · MPN: JU-W-LP326

Calling the myth-lovers, lore-hunters, and fairy tale re-writers. Got a bookshelf filled with magical swords, talking beasts, and ancient secrets? Instead of being at work, would you rather be on the Argo, at the round table, or in a cottage deep in the woods? This pin means your next adventure i...

SKU: DF-FIT0494

A pair of rubber-tyred ABS wheels designed to fit N20 mini metal gearmotors and compatible Solarbotics metal gear motors. The hub features teeth that can be used with a reflectance sensor for encoder feedback, adding speed and position sensing to your robot. The wheels press-fit onto the gearmot...

SKU: AF-4641

This N20 micro DC gearmotor includes a built-in magnetic encoder with two Hall effect sensors, providing both speed and direction feedback without additional wiring. The compact N20 form factor makes it ideal for small robotics projects where precise motor control is needed. The magnetic encoder...

SKU: AF-4638

This N20 micro geared DC motor includes a built-in magnetic encoder wheel and two Hall effect sensors, providing speed and direction feedback without additional wiring. The compact N20 form factor makes it well suited for small robotics projects requiring precise motor control. The motor runs on...

SKU: SF-ROB-28633 · MPN: ROB-28633

A pair of compact N20 gearmotors with built-in encoders, ideal for small-scale robotics projects. These popular motors pack power and precision into a tiny 12×10mm gearbox profile, making them perfect for differential drive robots, mini rovers, and space-constrained builds. Each motor includes a...

SKU: EC-MCA03168A

The Nano 168 is a compact, breadboard-friendly Arduino-compatible development board based on the ATmega168 microcontroller. It offers the same functionality as the Arduino Nano in a small DIP form factor, with 14 digital I/O pins, 8 analogue inputs, and Mini-B USB for programming and serial commu...

SKU: LB-LS0866

This Nano Multi-Function expansion board is designed especially for Arduino Nano Lead out all digital IO port and analogue IO port, each one with standard positive and negative power interface. Lead out the I2C interface of mainboard for convenient connection.Increasing the DC power supply i...

SKU: LB-LR0072

The Nano V3.0 CH340 is based off the famous Arduino platform, and has all the functionality of an Uno, but in a smaller package! Perfect for Arduino projects that require a small form factor (43mm by 18mm to be exact!) and do not need a DC power jack. Please note: You will need a Mini-B USB ca...