All Products

SKU: EF-EF03417

Joystick:bit V2 is a JoyStick based on micro:bit. It contains a 4-direction joystick and 4 undefined buttons as as classic JoyStick. At the same time, with the board buzzer and vibration motor, it also enhance game experience. Joystick:bit V2 can be remote control handle for micro:bit which on...

SKU: EC-ACS77312JS

Turn your Arduino into a simple game controller with this plug-and-play joystick shield. It features a two-axis thumb joystick with a select button plus four additional momentary push buttons — giving you retro game-pad style input for navigation, gaming, and menu control. The shield sits direct...

SKU: DF-FIT0148

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 2-pin 2.0mm mating connector housing 28-26 AWG crimp pins DOCUMENTSData Sheet SHIPPING LIST Connector housing 2-pin 2.0mm(0.08") x...

SKU: AF-261

Red and black tinned wires with a 2-pin JST PH connector on the end. 4" / 100mm long. Matches up nicely with our Lipoly chargers! We have the socket 'mating' version of this cable over here, as well as an 'extension' cable that has one of each soldered together. If you want a switch in t...

SKU: DF-FIT0149

A pack of 3-pin JST-style 2.0 mm pitch female connector housings with matching crimp pins. Ideal for making custom cables and connectors for sensors, servos, and other small electronics that use 2.0 mm pitch connectors. Specifications Connector Type – 3-pin female housing, 2.0 mm pitch Wire G...

SKU: DF-FIT0150

This product includes 4-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (40 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 4-pin 2.0mm mating connector housing 28 to 26 AWG crimp pins DOCUMENTSData Sheet SHIPPING LIST Connector housing 4-pin 2.0mm x...

SKU: SF-TOL-27923 · MPN: TOL-27923

This handy tool helps remove a standard 2-pin JST-PH connector with 2mm pitch, such as the female connector commonly found on single-cell LiPo batteries. It gives you something safer and easier to grip than the connector body itself, helping avoid sore fingertips, pinched wires from needle nose p...

SKU: LB-JSTBOARD

This E-textiles board is a breakout for a JST, so you can sew it onto a garment or use it in Paper Circuits! The JST breakout board can be easily sewn through the large holes. For paper circuits, simply apply copper tape on top of it.A wearable lithium polymer battery or wearable lipo also kno...

SKU: DF-FIT0299

This kit includes PHR-2, PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS Pitch:2.0mm ((0.079")) Current rating:2A AC,DC (AWG #24) Voltage rating:100V AC,DC Temperature range: -25°C to +85°C (including temper...

SKU: DF-FIT0255

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units). SPECIFICATIONS  Current rating:3A AC,DC (AWG #22) Voltage rating:250V AC,DC Temperature range: -25°C to +85°C (including temperature rise in...

SKU: AF-5754

This cable is a little over 100mm / 4" long and fitted with JST-GH compatible 6-pin connectors on either end. We dig the solid and compact nature of these connectors and the latch that keeps the cable from coming apart easily, and the wires are even color coded! These would go great with SEN...

SKU: SF-CAB-17854 · MPN: CAB-17854

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are suited to hardware that may see movement or vibration, such as sensors and teleme...

SKU: SF-PRT-09914

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST. Dimensions: 6" length Documents: JST connector Datasheet Illumitu...

SKU: SF-PRT-09915

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.

SKU: SF-PRT-09916

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDocuments: JST connector Datasheet

SKU: AF-4391

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the horizontal style.You can use these with any of our JST PH 3 / STEMMA cables. They're not STEMMA QT compatible (those use the ...

SKU: AF-4390

Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 4 pin. These are the vertical style.You can use these with any of our JST PH 4 / STEMMA cables. They're not STEMMA QT compatible (those use the sm...

SKU: AF-3814

For a really long time we assumed that the JST PH didn't have a free-hanging male header version. But then we found this JST-PH 2-pin Male Cable, and we were like, this is perfect! It's not a genuine JST connector, but it's 100% compatible with a nice clicky connection that you can ...

SKU: AF-4714

We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin plug. Between the two, 100mm of color coded wire - red for power, black for gro...

SKU: AF-1862

A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack. We also have simple JST pigtails that mate w...