All Products

SKU: AF-5515

Stretch out your servo connections with this flexible servo to premium male header jumper cable. It has a 3-pin shrouded "male" connector to plug the servo into and then, 17cm later, three separated jumper wire ends that plug into a breadboard or some header.It's excellent for when you want ...

SKU: DF-SEN0227

This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test. The SHT20 I2C temperature & humidity sensor adopt Sensirion techniqu...

SKU: AF-4099

Take your next outdoor sensor project to the next level with this SHT-30 based temperature/humidity sensor. The sensor includes a dual-use sensor module from Sensiron in a sintered metal mesh encasing. The casing is weatherproof and will keep water from seeping into the body of the sensor and dam...

SKU: AF-5064

The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.The enclosed box is a Sensiron SHT-30 digital sensor (much like our breakout here or this weather-proof mesh sensor) but wit...

SKU: DF-SEN0331

This DFRobot SHT31 digital temperature and humidity sensor is based upon the Sensirion SHT31 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap temperature sensing components, the SHT31 offers high reliability and long-term ...

SKU: DF-SEN0385

This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects. Please note that although the sensor is waterproof, it is not suggested to submerge it in water. For in-water measurement, the ...

SKU: AF-4163

Yay, a plastic tube! No, we jest. This is no ordinary plastic tube, but rather a side-lighting fiber optic tube. This is a pretty neat way to glow up. Light in the fiber optic cable zooms through the core by constantly bouncing off of the edge of the molded plastic, a principle called "t...

SKU: AF-4164

This side-lighting fibre optic tube produces a glowing effect along its entire length when illuminated by a powerful LED. Unlike standard fibre optics that only emit light from the end, this tube allows light to escape along the sides, creating an even, neon-like glow. The tube is 5mm in diamete...

SKU: AF-5687

Here at Adafruit, we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by this 'chip on board' ultra-flexible RGB LED Strip with a whoppin' 630 SMT LEDs per meter (210 x RGB LEDs, with 3 in series per segment), soldered side-by-side and...

SKU: AF-5685

A 1-metre flexible LED strip with 480 cool white SMT LEDs per metre, arranged in a chip-on-board configuration and diffused with silicone epoxy. The result is a continuous, smooth light output that resembles neon tubing — without the need for transformers or glass. This is a side-light strip, me...

SKU: AF-3729

Blinded by the light? Tell "The Boss" not to worry, especially with this ultra thin Side Light NeoPixel LED PCB Bar! Fancy side light LED strips are a great alternative for folks who have loved and used Adafruit NeoPixel strips for a few years but want gorgeous, glowy ...

SKU: SF-COM-17736

Protect your board or project with this four pack of silicone bumpers! Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from...

SKU: SF-COM-10594

Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a project down on a conductive surface. They also prevent your enclosure or PCB from sliding around. They can also be used as feet for enclosures. These ar...

SKU: AF-774

For those that want to cut, customize, and cap our awesome Digital Addressable RGB LED strips we now have a pack of the little rubber caps. These fit perfectly over the strips, use silicone glue to secure and waterproof them.Comes in a pack of 4 pieces

SKU: DF-FIT0935

This product is a protective case carefully designed for UNIHIKER. It is made of silicone material, which provides a comfortable grip and good protection for UNIHIKER, reducing the probability of accidental drops and screen damage. With its precise mold design, it fits snugly on UNIHIKER, making ...

SKU: DF-FIT0938

UNIHIKER cam be protect with the silicone protective case. Designed with precision molds, it fits snugly on your Unihiker single board computer, reducing the risk of accidental drops and screen damage. Choose from multiple colors to match your style, and enjoy clear silk screen markings for ...

SKU: DF-FIT0937

This product is a protective case carefully designed for UNIHIKER. It is made of silicone material, which provides a comfortable grip and good protection for UNIHIKER, reducing the probability of accidental drops and screen damage. With its precise mold design, it fits snugly on UNIHIKER, making ...

SKU: DF-FIT0936

This red silicone case is designed to protect and grip the UNIHIKER single board computer. The soft silicone material absorbs shocks from accidental drops and shields the screen, while the precision-moulded fit keeps all ports and buttons accessible. Silk-screen markings on the case clearly ident...

SKU: AF-1644

These nylon clips will let you attach our flexible NeoPixel strips to a wall, moulding, or project. Just side the rubber tubing thru so that the clips are in between two LEDs. Comes in a pack of 5.

SKU: AF-3890

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able t...