All Products

SKU: DF-FIT0708

A compact 10 mm micro stepper motor with 18° per step, designed for direct connection to microcontrollers like Arduino and ESP32 without requiring a dedicated driver board. The 2-phase 4-wire bipolar configuration makes it straightforward to integrate into small-scale automation projects. The mo...

SKU: LB-LS0194

A comprehensive assortment of 900 bipolar transistors across 18 different values, all in the standard TO-92 package. Each value includes 50 pieces, neatly organised in a compartmentalised storage box for easy identification and access. The kit includes a balanced mix of NPN and PNP transistors c...

SKU: WS-31122 · MPN: 31122

A 1.9" IPS touch LCD display module with 172 × 320 resolution and 262K colours. It combines an ST7789V2 display driver with a CST816 capacitive touch controller, providing both vivid visuals and responsive touch input in a compact form factor. The module communicates via SPI (display) and I2C (t...

SKU: EF-EF04086

A single-channel 3 V relay module from the ElecFreaks OCTOPUS series, designed for use with the BBC micro:bit. It uses a high-quality HUIKE relay capable of switching loads up to 30 A, making it suitable for controlling home appliances and other high-current devices. The module runs on 3 V power...

SKU: DF-FIT0894 · MPN: FIT0894

This push-in wire connector turns a single input connection into six output connections, making it a handy power distribution tool for low-voltage DC wiring.The push-in wiring method makes connections quick and convenient, while the internal conductive spring clamp is designed for firm contact an...

SKU: TB-RR2774

A pack of two 1 kΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specifications Resistance: 1 kΩ Tolerance: ±5% Power Rating: 1 W Type: Carbon film P...

SKU: TB-RR2846

A pack of two 1 MΩ carbon film resistors rated at 1 W continuous power. These through-hole axial resistors feature colour-coded bands for easy identification and solder legs for breadboard or PCB mounting. Specifications Resistance: 1 MΩ Tolerance: ±5% Power Rating: 1 W Type: Carbon film P...

SKU: ET-2085464

A 1-metre USB Type-A male to Micro-B male cable for powering and connecting devices such as Raspberry Pi, Arduino, and other microcontrollers. Suitable for both data transfer and power delivery via any standard USB power source. Specifications Connector A: USB Type-A male Connector B: USB Mic...

SKU: LB-LASER

A compact 1 mW laser diode module suitable for electronics projects, alignment tools, and sensor applications. Operates on a wide 2.6–5 V input range, making it compatible with both 3.3 V and 5 V microcontroller systems. Specifications Output Power: 1 mW Input Voltage: 2.6–5 V Current Rating...

SKU: SF-COM-30154 · MPN: COM-30154

This is a basic 1 MOhms through-hole resistor with ±5% tolerance and a 1/6W power rating. It is a simple passive component suited to prototyping, repairs and general circuit building.The PTH package is commonly used with solderless breadboards, perf boards and other through-hole projects. It is s...

SKU: AF-755

A 10-pack of 1N4001 general-purpose rectifier diodes — one of the most widely used power diodes in electronics. Rated for 1 A continuous forward current and 50 V peak reverse voltage with a typical forward voltage drop of 0.7 V. Key Features 1 A Forward Current – Suitable for most low-power re...

SKU: LB-LR0634

A general-purpose 1N4004 rectifier diode rated for 1 A continuous forward current and 400 V peak reverse voltage. A versatile component for reverse polarity protection, flyback protection across inductive loads, and AC-to-DC rectification circuits. Specifications Part Number: 1N4004 Max Forwa...

SKU: AF-1641

A 10-pack of 1N4148 small signal diodes — one of the most commonly used switching diodes in electronics. Designed for fast switching and small signal rectification rather than power applications, with a reverse recovery time of just 4 ns. Key Features Fast Switching – 4 ns reverse recovery tim...

SKU: TB-RG5010

A 1 nF polyester (greencap) capacitor rated at 100 VDC. Polyester capacitors offer good stability and reliability across a wide range of applications, making them a versatile choice for general-purpose circuits, filtering, and timing. Specifications Capacitance: 1 nF Tolerance: ±10% Voltage ...

SKU: SS-110990032

A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...

SKU: AF-518

An ultra-bright 1 W cool white LED pre-mounted on an aluminium PCB heatsink, making it easy to solder and integrate into projects. With 90 lumens output in a 140° lambertian pattern, it delivers bright, even illumination ideal for flashlights, headlamps, and general lighting. The LED produces a ...

SKU: LB-LR-DIGI-TEMP-1M-A

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header as shown — no breadboard, jumper wires, or additional components needed. This is the assembl...

SKU: LB-LR-DIGI-TEMP-3M-A

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the assembled versio...

SKU: LB-LR-DIGI-TEMP-1M-UA

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the unassembled vers...

SKU: LB-LR-DIGI-TEMP-3M-UA

The Little Bird 1-Wire Digital Temperature Sensor for Raspberry Pi — a plug-and-play solution for environment sensing, data logging, and IoT applications. Simply plug it onto the Raspberry Pi GPIO header — no breadboard, jumper wires, or additional components needed. This is the unassembled vers...