All Products

SKU: AF-6156 · MPN: ADA6156

This diffused RGB backlight is a rigid acrylic light panel like the kind normally found behind LCD displays, but with a full-colour LED instead of a plain white backlight. The acrylic spreads the light from a single LED to give a near-uniform glow across the lit area.The flat rear side includes a...

SKU: AF-6158 · MPN: ADA6158

This diffused acrylic backlight strip gives you an easy way to add a smooth, colourful glow to projects. It is the kind of light guide normally found behind LCD panels, but this version uses a single RGB LED so you can drive red, green and blue channels independently.The LED is encased in a 3.3mm...

SKU: DF-FIT0562

DFRobot has a Gravity I2C LCD1602 RGB Backlight Screen which backlight can be modulated to the different backlight colors and the display effect is very brilliant. This RGB LCD backlight panel is its internal backlight component.   The RGB LCD backlight panel uses the RGB color model, t...

SKU: AF-714

This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the RGB LCDs we stock in the shop both the RGB negative and RGB positive. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then another 3 to control the RGB backlight for a...

SKU: AF-716

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and keypad inputs, leaving your remaining pins free for sensors and other peripherals...

SKU: DF-DFR0239

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lighting to existing or new projects. Controlled by PWM channels can be available in s...

SKU: DF-DFR0238

This small size breakout is programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It is designed to allow the easy addition of dynamic indicators, displays, and lighting to existing or new projects. Controlled by PWM channels can be available i...

SKU: SF-COM-16911 · MPN: COM-16911

Add red, green and blue indication to your project with this 5 mm through-hole RGB LED. It uses a clear lens and has four pins: one pin for each colour channel and a shared common cathode.The longest pin is the common cathode, making it straightforward to identify during assembly. You can use the...

SKU: SF-COM-14646

A 32×32 RGB LED matrix panel with 1024 individually addressable LEDs on a 190 × 190 mm (7.5 × 7.5″) board. The seamless frame and dual IDC connectors allow multiple panels to be daisy-chained together for larger displays. The panel requires a regulated 3.3–5V power supply capable of sourcing up ...

SKU: LB-LR0013

This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour channel has a built-in current-limiting resistor, helping protect the LED from bur...

SKU: SF-COM-12584

Are you looking to add a lot of color to your project? These massive 32x32 RGB LED panels are an awesome place to start. You can create animations, games, or all sorts of other fun displays with them. Yes, you read that right: a 32x32 LED matrix, that’s 1024 LEDs on a 7.5" x 7.5" board. On top of...

SKU: LB-LS0014

Check out these big 10mm through-hole LEDs! The clear epoxy package causes these LEDs to have a bright glow. Features: Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1V Forward Current: 20mA Intensity (R/G/B): 550 / 250 / 700 mcd Common Cathode This is a bag of 20 RGB LEDS

SKU: PL-1245

The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your next project.

SKU: DF-FIT0614

Nowadays, LED strip is becoming more and more prevalent in our daily life. Sometimes, especially in festival days, we even feel that there are no more fun and excitement without it. How about getting a cool LED strip and starting having a colorful life! This is a full-color flexible LED strip ...

SKU: DF-DFR0274

The RGB LED Strip Driver Shield allows you to control 12 V RGB LED strips (common anode) directly from an Arduino. With three PWM outputs capable of up to 3 A each, the shield can drive up to 10 metres of RGB LED strip. A built-in IR receiver enables remote control operation, and an on-board fuse...

SKU: AF-285

This weatherproof RGB LED flexi-strip features 30 LEDs per metre on a white PCB backing with a silicone weatherproof coating and 3M adhesive on the reverse. The entire strip is controlled as one unit — drive the R, G, and B channels with a microcontroller and three N-channel MOSFETs (or NPN trans...

SKU: AF-346

These LED strips are fun and glowy. There are 60 RGB LEDs per meter - twice as many as our other strip, and you can control the entire strip at once with any microcontroller and three transistors. The way they are wired, you will need a 9-12VDC power supply and then ground the R/G/B pins to tu...

SKU: AF-4549

A flexible, neon-like RGBW LED strip encased in translucent silicone rubber for a smooth, diffused glow. This 1-metre strip produces a neon-style effect without the need for glass tubing or high-voltage transformers — just connect 9–12V DC and it lights up beautifully. The strip features four co...

SKU: AF-4548

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these fresh Flexible Silicone Neon-Like LED Strips! They look a lot like neon, but without the need for expensive transformers, glass tubing or inert gasses.Flexible and bendy, this p...

SKU: SF-CAB-10647

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness.This is a 15ft. length of 10-wire ribbon cable. Check the related products below for crimp-on connector...