All Products

SKU: DF-SEN0223

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity. Its maximum detection value is 10MΩ. It can detect not only coins, wires, metal and other good conductors, but also the human body, fruit, plants and other conductors. By touching the...

SKU: DF-SEN0466

This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon monoxide in the environment. Can be widely applied to fields like portable devic...

SKU: DF-SEN0656 · MPN: SEN0656

The CT1780 is a cold-junction compensated amplifier for K-Type thermocouples, designed to make extreme temperature measurement easier to add to microcontroller projects. It digitises the tiny thermocouple signal and provides temperature readings with 0.25℃ resolution over a very wide measurement ...

SKU: DF-DFR0429

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and learning the relevant electronic theory can be confusing an...

SKU: DF-DFR0399

A compact DC micro metal gear motor with a built-in driver that uses the DFRobot Gravity 3-pin interface. Simply connect to a microcontroller and control direction and speed with a single PWM signal — no external H-bridge required. The embedded driver accepts standard servo-style PPM signals, so...

SKU: DF-SEN0497

The DHT20 temperature & humidity sensor is the newly upgraded version of the DHT11. Data accuracy, stability, response speed, measurement range are greatly improved up. DHT20 is a brand new ASIC dedicated chip, an improved MEMS semiconductor capacitive humidity sensor element and a standard on-ch...

SKU: DF-DFR0473

This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...

SKU: DF-DFR0576

The Gravity I2C Multiplexer solves address conflicts when you need to connect multiple I²C devices that share the same fixed address. It provides eight independent I²C ports on a single bus, allowing up to eight identical-address sensors or modules to communicate without conflict. The default I²...

SKU: DF-DFR0830

This sensor contains a metal ball that moves along its special internal structure on the effect of gravitation force so as to make a connection or disconnection. Therefore, it can be used as a simple tilt switch. With digital input, this sensor can be used with an Arduino expansion board to reali...

SKU: DF-DFR0017

The DFRobot Relay Module is a standard relay used with a controller board to interface external electrical circuits or modules. Some of the most common applications with Arduino are: Home lighting, electrical appliances of high power and other equipments. The modular design makes it easy to in...

SKU: DF-SEN0239

A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a rear-mounted screw, making it easy to tune for different applications. Features t...

SKU: DF-DFR0021-B

This Blue LED light module has a shiny white color. It is ideal for Arduino starters. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too m...

SKU: DF-DFR0030

A digital capacitive touch sensor from DFRobot's Gravity series. It detects touch through the same capacitive sensing technology used in smartphones — even through thin cloth or paper. The sensor outputs a digital high/low signal, making it a simple drop-in replacement for mechanical buttons in A...

SKU: DF-DFR0474

Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow. It is easy to light up the LED. Turn on the power, then the LED will light up without programming. The built-in controller controls the colors and duration randomly, which makes it shine like a colorful star....

SKU: DF-DFR0021-G

This green LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield. NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too much ...

SKU: DF-SEN0185

INTRODUCTION what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right! This Hall sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output.See ...

SKU: DF-DFR0565

Gravity: Digital Signal Isolator is capable of isolating I2C digital signal and providing isolated power to the sensor module, effectively preventing mutual interference between the sensor modules. This digital signal isolator can be used for multi-parameter water quality detection systems to pre...

SKU: DF-DFR0094

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy to make your own IR controller using IR transmitter. SPECIFICATIONS ...

SKU: DF-DFR0095

An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared remote control, for example, pushing a button sends an electric signal to the LE...

SKU: DF-DFR0448

A string of 40 warm white LEDs on a 4-metre wire, controlled via a digital signal through the DFRobot Gravity interface. Create fading effects with PWM or power at a fixed voltage for steady illumination. Ideal for decorative lighting, ambient displays, and creative electronics projects. Key Fea...