All Products

SKU: DF-SEN0376

This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs. Aiming at fast and accurate detection of alcohol gas concentration in the air, the sensor is well applicable to the small alcohol concentration measurement in...

SKU: DF-SEN0214

The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design and a non-conductive acrylic base plate, it's designed for safe use in automatio...

SKU: DF-SEN0211

INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this problem. Using induction you can measure AC current without intrusive methods. Pl...

SKU: DF-SEN0288

A non-contact AC current sensor with a clamp-on transformer probe, capable of measuring 0–10 A AC. Simply clamp the probe around an AC line and connect the 3.5 mm plug to the signal conversion module — no wire cutting or circuit modification required. The Gravity analogue interface outputs a 0.2...

SKU: DF-SEN0287

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue, eliminating the need to cut wires or reconnect circuits. Simply clamp the AC transformer probe on the AC line, and then plug the 3.5...

SKU: DF-SEN0164

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface that blocked it, the phototransistor can pick up the signal for distance calcul...

SKU: DF-DFR0075

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project. SPECIFICATIONS Supply voltage: 5V/3.3V Interface: Analog Size: 55x33mm ...

SKU: DF-DFR0026

Here comes DFRobot's new Analog Ambient Light Sensor for Arduino or Raspberry Pi. Brand new design and much more convenient to use. This sensor help you to detect the light density and reflect the analog voltage signal back to Arduino controller. You can set the threshold of voltage level to ...

SKU: DF-SEN0043

An analog ambient light sensor based on the TEMT6000 detector, which has a spectral response closely matching the human eye with very low IR sensitivity. It outputs an analog voltage proportional to the ambient light level, making it easy to read with any Arduino or microcontroller analog input. ...

SKU: DF-SEN0098-V2 · MPN: SEN0098-V2

##Introduction This is an updated version. Retired Product: Gravity: Analog 50A Current Sensor (AC/DC) V1Get this low-power current sensor to monitor your project every second for saving energy or protecting the circuit!This fully integrated Hall Effect-based linear STK-600/M current sensor gives...

SKU: DF-SEN0262

This current-to-voltage module can linearly convert 0~25mA current signals into 0~3V voltage signals. Industrial sensors or devices usually have the current signal output of 4~20 mA. With this current-to-voltage module, your main control board can easily attain the current signals input from i...

SKU: DF-SEN0237-A

Measure dissolved oxygen in water for aquaculture, environmental monitoring, natural science projects and general water-quality work. This DFRobot Gravity kit pairs a galvanic dissolved oxygen probe with an analogue signal converter board for easy use with Arduino and other microcontrollers that ...

SKU: DF-DFR0300-H

Gravity: Analog Electrical Conductivity Sensor / Meter(K=10) OverviewDFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid, such as seawater, concentrated brine, etc. The measurement range is up to 100ms/cm. This...

SKU: DF-SEN0240

The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through differential input and analogue filtering, outputting a clean 0–3.0V analogue sig...

SKU: DF-DFR0022

The Gravity Analogue Grayscale Sensor measures reflected light intensity, outputting an analogue value that ranges from black (low) to white (high). It uses a photocell paired with an integrated white LED to illuminate the surface being measured, making it effective for detecting surface brightne...

SKU: DF-SEN0198

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to measure temperatures greater than 100C you will need something with a greater temp...

SKU: DF-SEN0219

The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in gl...

SKU: DF-SEN0464

As an upgraded version of Industrial Gravity: ORP Sensor Meter For Arduino, this new generation ORP probe employs platinum indicator electrode and silver-silver chloridereference electrode, which makes it available for 24-hour online ORP monitoring and greatlyenhances product durability. The new ...

SKU: DF-SEN0161-V2

The Gravity Analog pH Sensor/Meter Kit V2 is designed to measure the pH of liquids, indicating acidity or alkalinity on a scale of 0–14. It's commonly used in aquaponics, aquaculture, hydroponics, and environmental water testing. The kit includes a laboratory-grade pH probe, a signal conversion b...

SKU: DF-SEN0169-V2

DFRobot Gravity: Analog pH meter pro V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing.As an upgraded version of pH meter pro V1, the sec...