All Products

SKU: AF-4310

A 1-metre flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow. The strip uses 96 individually addressable WS281x (NeoPixel) LEDs per metre, driven by standard NeoPixel data at 5 V. The silicone casing acts as a diffuser, eliminating visible LED hotspot...

SKU: DF-FIT0333

A lightweight, thin, and truly flexible solar panel rated at 1.5V / 250mA (0.5W). Unlike rigid solar panels, this one can be bent, sewn, or adhered to curved surfaces, making it perfect for wearable electronics, portable gear, and creative DIY projects. The durable ETFE film construction is wate...

SKU: AF-974

This flexible USB swivel adapter will extend your USB port out of the way. Useful when you want to attach a 'bulky' USB device without blocking a secondary port. We thought this would be handy for BeagleBone or Raspberry Pi users. Rotates 180 degrees in two axes, with a very nice solid construction.

SKU: SF-SEN-08685

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pr...

SKU: SF-SEN-08713

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when...

SKU: SF-SEN-08712

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing hard, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does not change while being flexed. Resistance changes only when pr...

SKU: SF-COM-12096

This 0.012" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made specifically for linear actuators to replace small motors or solenoids. If you are a...

SKU: AF-1894

A 6" × 6" (152 × 152 mm) sheet of DuPont Pyralux flexible PCB material — the same material used to make flexible circuits in smartphones and consumer electronics. One side is 1 oz (35 µm) copper, and the other is 25 µm polyimide for strength and flexibility. Treat it like standard copper-clad bo...

SKU: SF-SEN-10264

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad! The resistance of the flex s...

SKU: SF-SEN-08606

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It’s so bad! The resistance of the flex se...

SKU: DF-SEN0064

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove. I love the Nintendo Power Glove. It's so bad! The resistance of the flex ...

SKU: AF-4553

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum, and the top and bottom are soft silicone for a nice and easy-to-clean case that...

SKU: AF-5847

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum, and the top and bottom are soft silicone for a nice and easy-to-clean case t...

SKU: AF-4822

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum, and the top and bottom are soft silicone for a nice and easy-to-clean case that...

SKU: PH-105820 · MPN: 105820

The FLIRC case for the Raspberry Pi 5 combines a sleek aluminium top with an ABS plastic base for effective passive cooling and a premium look. The included ARCTIC thermal pad transfers heat from the CPU to the aluminium body, keeping your Pi cool during extended use. The case provides easy acce...

SKU: SF-SEN-16465 · MPN: SEN-16465

The FLIR Lepton® 2.5 is a compact radiometric long wave infrared (LWIR) camera module for adding thermal imaging and non-contact temperature measurement to embedded electronics, mobile devices and custom instruments.Its 80 × 60 active pixel focal plane array captures calibrated temperature data i...

SKU: SF-BOB-16912

The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard power supplies, generated from 3 – 5.5V, and a master clock. Local power supplies,...

SKU: SF-KIT-15948

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. This kit includes a breakout as well a...

SKU: KZ-FLOOF

Delight your cat-loving friends with this Floof Cat Enamel Pin! This cute enamel pin features a fluffy white cat with a cute pink nose and blue eyes. Perfect for adorning your favourite jacket, hat, or bag, this pin is sure to make a statement. Let this Floof Cat bring a bit of kit...

SKU: AF-1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...