Store

Adafruit

$68.19 |
In stock at supplier
No reviews yet

A 1-metre flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow. The strip uses 96 individually addressable WS281x...

Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

A 1-metre flexible LED strip encased in translucent silicone rubber that produces a smooth, neon-like glow. The strip uses 96 individually addressable WS281x (NeoPixel) LEDs per metre, driven by standard NeoPixel data at 5 V. The silicone casing acts as a diffuser, eliminating visible LED hotspots for a clean, continuous light effect.

The silicone enclosure is durable and weather-resistant — suitable for cosplay, bike lighting, and festival decorations, though not rated for prolonged submersion or permanent outdoor installation. The strip can be cut to length with wire cutters.

Key Features

  • Neon-Like Diffusion – Translucent silicone casing produces smooth, even illumination
  • 96 NeoPixels per Metre – Individually addressable WS281x LEDs
  • Flexible & Slim – Bends easily for curves and contours
  • Weather-Resistant Silicone – Durable enough for outdoor and wearable projects
  • JST SM 3-Pin Input – Pre-terminated connector for power and data
  • 5 V Operation – Standard NeoPixel data protocol
Tip: Connect 5 V power and NeoPixel data to the input connector. Ensure the ground pin is shared between the 5 V power supply and your microcontroller.

Ideal For

  • Cosplay and wearable lighting
  • Bike and vehicle accent lighting
  • Festival and event decorations
  • Signage and display lighting effects

Package Contents

  • 1× Flexible Silicone NeoPixel LED Strip (1 m, 96 LEDs, sealed one end, JST SM connector on input)

Resources

Jargon buster

Plain-language definitions for the technical terms used above.

LED
A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
microcontroller
A microcontroller is a small computer on a chip that runs your program and controls connected inputs and outputs. For this product, it is the part that reads buttons and sensors, drives the display and speaker, and communicates over Bluetooth.
NeoPixel
A type of addressable LED system where colour data is sent along a single digital data line from one LED or controller to the next. Compatibility matters because the timing and signal format must match for the lights or driver board to respond correctly.

Related Tutorials

Free guides on learn.littlebird.com.au

Stella
Stella Expert

Ask me anything about this product

Maddy, co-founder of Little Bird

Need help? We're here for you!

Hi, I'm Maddy. My team and I are ready to help with your order or any questions.