SparkFun
SWD Cable - 2x5 Pin
A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) a...
A 150mm (~6") 10-conductor ribbon cable with 2×5 pin female connectors on both ends, using standard 1.27mm (0.05") pitch. Ideal for SWD (Serial Wire Debug) and JTAG connections between debug probes and target boards.
Specifications
- Length – 150mm (~6")
- Conductors – 10
- Connectors – 2×5 pin female on both ends
- Pitch – 1.27mm (0.05")
Ideal For
- SWD and JTAG debugging connections
- ARM Cortex debug probe interfaces
- Embedded development and programming
Package Contents
- 1× SWD Cable (2×5 Pin, 150mm)
Jargon buster
Plain-language definitions for the technical terms used above.
- JTAG
- JTAG is a hardware debugging and programming interface used to inspect and control chips at a low level. It matters for advanced development because it can help diagnose firmware problems that are hard to see through normal serial output.
- SWD
- Serial Wire Debug is a two-wire programming and debugging interface used with many microcontrollers. It matters if you need low-level access to program, recover or debug the processor board connected to this carrier.
Find this product in
Brands
SWD Cable 2x5 Pin Datasheet
Datasheet · 414.2 KB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 322.5 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
