SparkFun
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel rece...
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constellations simultaneously for faster lock times and improved precision.
An onboard rechargeable battery maintains the RTC and orbit data for up to five hours, reducing time-to-first-fix from ~30 seconds (cold start) to ~1 second (hot start). The compact form factor uses a U.FL antenna connector, supporting both standard ceramic antennas and small chip-scale antennas.
Key Features
- 72-Channel GNSS Receiver – Tracks GPS, GLONASS, BeiDou, and Galileo simultaneously
- Qwiic (I2C) Interface – No soldering required; plug-and-play with the Qwiic connector system
- Rechargeable Backup Battery – Hot start in ~1 second, maintains RTC for up to 5 hours
- U.FL Antenna Connector – Supports standard and chip-scale external antennas
- Highly Configurable – Adjustable baud rates, update rates, geofencing, spoofing detection, SBAS/D-GPS via u-center or Arduino library
- Breadboard Friendly – 0.1" header pins broken out alongside Qwiic connector
- UART Output – Industry-standard pin grouping compatible with Serial Basic
Specifications
- GNSS Module: u-blox ZOE-M8Q
- Channels: 72
- Constellations: GPS, GLONASS, BeiDou, Galileo
- Interfaces: I2C (Qwiic), UART
- Antenna Connector: U.FL
- Cold Start TTFF: ~30 seconds
- Hot Start TTFF: ~1 second
Ideal For
- Compact GPS tracking and logging projects
- Drone and robotics navigation
- Asset tracking with space constraints
- Multi-constellation GNSS applications
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- baud
- Baud is the signalling rate of a serial connection, often used as the speed setting for UART communication. Matching the baud rate matters because both connected devices must use the same setting for readable data.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- Galileo
- Europe’s satellite navigation system. Galileo support can improve satellite availability and accuracy, especially when combined with GPS and other constellations.
- GLONASS
- Russia’s satellite navigation system. A receiver that can also use GLONASS has more satellites to choose from, which can improve positioning reliability when the sky view is partly blocked.
- GNSS
- GNSS stands for Global Navigation Satellite System, covering positioning systems such as GPS and similar satellite networks. It matters here because high-precision GNSS modules can output lots of serial position data that this product can send wirelessly to a computer or phone.
- GPS
- The US satellite navigation system used by GNSS receivers to calculate position and time. Support for GPS is important because it is widely available and often used together with other constellations for more reliable positioning.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- Qwiic
- Qwiic is a plug-in connector system for I2C devices that uses small 4-pin cables, so you can connect compatible sensors without soldering. It matters because your controller or adapter also needs Qwiic, or you will need a cable or breakout to wire it up.
- RTC
- A Real-Time Clock keeps track of time even when the main processor is asleep or powered down, usually with a small backup battery. It matters for data logging and tracking projects that need accurate timestamps.
- SBAS
- Satellite-Based Augmentation System, a set of regional services that broadcast correction information for GNSS receivers. SBAS can improve ordinary GPS-style positioning, although it is not the same as centimetre-level RTK correction.
- u.FL
- u.FL is a tiny snap-on antenna connector often used on compact wireless boards. A board with u.FL usually needs an external antenna, which matters if the product will be inside an enclosure or needs better antenna placement.
- UART
- UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.
Find this product in
Sensors & Input
SparkFun ZOE-M8Q GPS Schematic
Schematic · 112.5 KB · Click any page to view full size
ZOE-M8Q Datasheet
Datasheet · 1.4 MB · Click any page to view full size
ZOE-M8 Integration Manual
User Guide · 1.4 MB · Click any page to view full size
ZOE-M8 Product Summary
Product Brief · 161.4 KB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 773.8 KB · Click any page to view full size
Resources & Downloads
Guides, code examples, and more
Related Tutorials
Free guides on learn.littlebird.com.au