Adafruit
SOIC 8-Pin Test Clip to DIP Adapter
An 8-pin SOIC test clip with a DIP breadboard adapter, designed for in-circuit probing and programming of flash memory, EEPROMs, and other 8-SOIC ICs — no so...
Get notified when back in stock
An 8-pin SOIC test clip with a DIP breadboard adapter, designed for in-circuit probing and programming of flash memory, EEPROMs, and other 8-SOIC ICs — no soldering or desoldering required. Simply clip onto the chip to access I2C, SPI, or QSPI connections, or to burn firmware directly.
The clip features gold-plated contacts with a soft grip that holds firmly onto both standard and wide SOIC packages without damaging the circuit. A ~30 cm 28AWG cable connects the clip to a 0.1-inch (2.54 mm) header adapter that plugs into any standard breadboard.
Key Features
- 8-Pin SOIC Clip – Grips standard and wide SOIC packages securely
- Gold-Plated Contacts – Reliable connection without marring components
- DIP Breadboard Adapter – 0.1-inch pitch header for direct breadboard use
- ~30 cm Cable – 28AWG wires for flexible routing
- No Soldering Required – Probe or programme chips in-circuit
Ideal For
- In-circuit programming of flash and EEPROM ICs
- Probing SPI, I2C, and QSPI connections
- Firmware flashing without desoldering
- Hardware debugging and reverse engineering
Package Contents
- 1× SOIC 8-Pin Test Clip with DIP Adapter Cable
Jargon buster
Plain-language definitions for the technical terms used above.
- EEPROM
- A type of non-volatile memory that keeps stored data even when power is turned off. In a sensor module, it can be used to store settings or calibration data so they do not need to be re-entered every time.
- Flash memory
- Flash memory is non-volatile memory that retains stored data even when power is removed, and can be erased and rewritten in blocks. It lets data such as firmware, settings or saved records persist across power cycles.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Find this product in
Prototyping & Wiring
Related Tutorials
Free guides on learn.littlebird.com.au
