DFRobot
Maqueen V5 Replacement N20 Motor Kit
·
This official replacement motor kit helps bring a damaged Maqueen V5 educational robot back to life after classroom mishaps, jammed gears, dust, hair or roug...
Get notified when back in stock
This official replacement motor kit helps bring a damaged Maqueen V5 educational robot back to life after classroom mishaps, jammed gears, dust, hair or rough handling.
It is intended as a single motor replacement for the Maqueen V5. The motor comes with pre-soldered pin headers, so you can swap out the damaged motor and plug the new one in without soldering.
Each kit contains one N20 metal motor with pre-soldered PCB and pin headers, one motor mounting bracket, two mounting screws, and one sponge pad for battery box cushioning. Please note that a new Maqueen V5 already includes the two motors required for operation; if both motors are damaged, you will need two of these kits.
Features:
- All-in-One Solution: Includes one motor, a mounting bracket, screws, and a pad—everything needed for a single motor replacement.
- Quick & Easy Repair: The motor comes with pre-soldered pin headers, so no soldering is required. Simply swap the old motor out and plug the new one in.
- Official Accessory: Guarantees perfect compatibility and performance, matching the original motor specifications of the Maqueen V5.
Specifications:
- Interface: 2P 2.54mm Pin Header (Straight Type)
- Screw: M2×8 Cross-Recessed Pan Head Combination Screw
- Model: N20
- Rated Voltage: 3V DC
- No-Load Speed: 10,000 RPM (at Rated Voltage)
- Gear Reduction Ratio: 1:110 (Mechanical Reduction)
- Output Shaft Speed: 90 RPM (at Rated Voltage)
- Rotation Direction: CCW (Counterclockwise, Viewed from Output Shaft End)
- Motor Mount: ABS (Acrylonitrile Butadiene Styrene)
- Sponge Pad: Black Closed-Cell Polyurethane Foam Tape, Single-Sided Adhesive, 20mm×15mm×5mm
A handy spare for schools, clubs and workshops using the Maqueen V5 robot where quick repairs and minimal downtime matter.
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- Matter
- A smart home connectivity standard designed to let devices work across different ecosystems. It matters if you want a project to integrate more easily with platforms such as Apple Home, Google Home, or other Matter-compatible systems.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Robotics & Motion
Supplier page — dfrobot.com
Supplier Description · 175.9 KB · Click any page to view full size
