Raspberry Pi Ltd
Raspberry Pi M.2 HAT+
· MPN: SC1166
All Products
New Arrivals
Raspberry Pi
Brands and Manufacturers
Raspberry Pi 5
Storage & Memory
Raspberry Pi Hats
Prototyping & Wiring
$21.28
$27.00
Save 21%
|
In stock
The Raspberry Pi M.2 HAT+ facilitates the connection of M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5 through its PCIe 2.0 inter...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
The Raspberry Pi M.2 HAT+ facilitates the connection of M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5 through its PCIe 2.0 interface, offering quick data transfers up to 500 MB/s.
This adapter board features a 16-pin, 0.5mm-pitch FPC connector which is linked to the Raspberry Pi 5's single-lane PCI Express 2.0 interface. It is designed to fit M.2 devices that are compatible with the M Key edge connector and come in 2230 and 2242 form factors.
The board can provide up to 3A of power to these devices. Compliant with the Raspberry Pi HAT+ specification, the M.2 HAT+ is automatically recognised by the latest Raspberry Pi software and firmware. It comes with a 16mm stacking header and threaded spacers, allowing for installation alongside the Raspberry Pi Active Cooler.
Key Features:
- Supports a single-lane PCIe 2.0 interface with a maximum transfer rate of 500 MB/s.
- Compatible with M.2 M key edge connector devices.
- Suitable for devices in 2230 and 2242 form factors.
- Provides up to 3A of power to connected M.2 devices.
- Includes power and activity indicators.
- Meets the Raspberry Pi HAT+ specification standards.
- Comes with necessary installation accessories such as a ribbon cable, 16mm stacking header, threaded spacers, screws, and a knurled double-flanged screw for securing the M.2 peripheral.
- Operates within a 0°C to 50°C temperature range.
This adapter board features a 16-pin, 0.5mm-pitch FPC connector which is linked to the Raspberry Pi 5's single-lane PCI Express 2.0 interface. It is designed to fit M.2 devices that are compatible with the M Key edge connector and come in 2230 and 2242 form factors.
The board can provide up to 3A of power to these devices. Compliant with the Raspberry Pi HAT+ specification, the M.2 HAT+ is automatically recognised by the latest Raspberry Pi software and firmware. It comes with a 16mm stacking header and threaded spacers, allowing for installation alongside the Raspberry Pi Active Cooler.
Key Features:
- Supports a single-lane PCIe 2.0 interface with a maximum transfer rate of 500 MB/s.
- Compatible with M.2 M key edge connector devices.
- Suitable for devices in 2230 and 2242 form factors.
- Provides up to 3A of power to connected M.2 devices.
- Includes power and activity indicators.
- Meets the Raspberry Pi HAT+ specification standards.
- Comes with necessary installation accessories such as a ribbon cable, 16mm stacking header, threaded spacers, screws, and a knurled double-flanged screw for securing the M.2 peripheral.
- Operates within a 0°C to 50°C temperature range.
Documents:
Jargon buster
Plain-language definitions for the technical terms used above.
- FPC
- FPC stands for flexible printed circuit, a flat flexible cable or connector style often used where space is tight. It matters because this breakout needs the correct pin count and pitch FPC cable to connect reliably to the display or high-speed interface.
- M.2
- A compact edge-connector format commonly used to plug small modules into a carrier board without soldering. On this product it is the physical connector used by the MicroMod system, so compatibility with the matching processor board is important.
- NVMe
- A high-speed storage standard commonly used by modern SSDs. NVMe support matters if you want faster storage for large AI models, video files or operating system images than a typical microSD card can provide.
Find this product in
Raspberry Pi
