DFRobot
Maqueen Lite micro:bit V2 Robot Kit with Enclosure & Track Map
· MPN: ROB0148-EN-5
Bring micro:bit robotics into the classroom or makerspace with Maqueen, a compact educational programming robot platform designed for STEAM learning. It keep...
Bring micro:bit robotics into the classroom or makerspace with Maqueen, a compact educational programming robot platform designed for STEAM learning. It keeps the simple, playful style of micro:bit while adding motors, sensors, lights and expansion interfaces for hands-on coding activities.
This bundle includes micro: Maqueen Lite, micro:bit V2, Type-C & Micro 2-in-1 USB Cable, micro:bit Enclosure and Track Map. Batteries are not included, and the products in this set are packaged and supplied independently.
Maqueen supports MakeCode and works with DFRobot’s Mind+ graphical programming platform, making it suitable for students getting started with block-based coding and robotics. The suggested age is 8+.
Features:
- Support for Makecode, will support Scratch and python later.
- Small size, flexible movement.
- All-metal miniature gear motor, good quality, strong driving force.
- Line patrol, ambient light, LED lights, ultrasonic interface, buzzer, I2C interface, mechanical expansion screw hole, etc. ... full-featured, highly expandable.
- Exclusive customized POM bearing wheel, flexible and reliable, strong obstacle crossing ability.
- Easy to install, easy to use.
Specifications:
- Supply Voltage: 3.5V~5V DC ( Three AAA batteries or 3.6V~3.7V lithium battery )
- Infrared Grayscale Sensor(High-low level): x 2
- Buzzer: x 1
- Infrared Receiver (NEC decoder): x 1
- LED Lights (High-low level control): x 2
- RGB Ambient Light (16 million colors): x 4
- SR04, SR04P Ultrasonic Interface(5V): x 1
- I2C Interface (5V): x 1
- Gravity Extension Interfaces (P0, P1, P2): x 3
- N20 All-metal Gear Motor: x 2
- Motor Drive Mode: PWM motor drive
- Bracket and Protective Cover Extension M3 Screw Hole: x 6
- Programming Method: Makecode graphical programming, Mind+ graphical programming
- Dimension: 81mm x 85 mm x 44mm/3.19 x 3.35 x 1.73in
- Weight: 75.55g
Jargon buster
Plain-language definitions for the technical terms used above.
- Gravity
- Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
- RGB
- Short for red, green and blue, usually referring to an LED that can mix those three colours. It matters because controlling an RGB LED teaches how separate outputs combine to create different colours.
Find this product in
Robotics & Motion
Related Tutorials
Free guides on learn.littlebird.com.au
Featured in buying guides
Comparison guides this product appears in
